Zodiac CX40 User manual

Never turn on the cleaner unless
it is fully submerged in the water.
Doing so will void the warranty
and may cause severe damage
to the cleaner motors.
Do not use an extension cord to
connect the control unit.
Connect Floating Cable
Contents
Submerge Robotic Cleaner in Pool
2
1
3
Ideal entry point in the pool to avoid
cord tangling and obtain adequate
oor/wall coverage.
Wait for bubbles
to stop completely,
then let the cleaner
sink to the bottom
of the pool.
2
1
5
Never swim when cleaner
is in the pool
"CLICK"
"CLICK"
"CLICK"
"CLICK"
Start Cleaning
4
Press the Start/Stop button to begin cleaning.
1
2
Control Unit
Start/Stop cleaning
Select cleaning mode:
Floor Only
(1h 15 min)
Cleans Floor only
Floor/Walls/Waterline
(2h 30min).
Remove cleaner from the pool
(CX50 only)
3.5 m
Residual Current
Device 240V
CX50 only
Proper Removal from Pool
6
NOTE: Never lift the cleaner out of the
pool by the oating cable.
Remove the cleaner from the
pool using the handle.
Use the Lift System
(CX50 only) on the
Control Unit to drive
the cleaner to the
nearest wall.
Untangle
Unplug
12
34
*CX50 model only

This Quick Start Guide contains essential installation and startup
instructions. For complete maintenance and troubleshooting
instructions, please refer to the complete Owner's Manual
available at www.zodiac.com.au | www.zodiac.co.nz
A Fluidra Brand
©2023 ZODIAC is a registered trademark of Zodiac International S.A.S., used under license. This document is subject to change without notice.
H0829900_REVA
1 2
34
5
Rinse and Store Cleaner
7
Fluidra Group Australia Pty Ltd
1 Herbert Place, Smithfield NSW 2164
PO Box 7238 Wetherill Park NSW 1851,
Australia
ABN: 87 002 641 965
Zodiac.com.au | 1300 186 875
Fluidra NZ Ltd
13 Douglas Alexander Parade
Rosedale Auckland 0632, New Zealand
NZBN: 942 903 181 70759
Zodiac.co.nz | 0800 807 665
Quick Start Guide
Robotic Cleaner
Models: CX40, CX50
TYPE EB37--
Before You Start
This Quick Start Guide contains essential installation and startup instructions. For additional operation, maintenance, and troubleshooting instructions, please refer to the complete
Owner’s Manual. Read the complete manual and all safety warnings before commencing installation.