Zohd MKIII Series User manual

Thank you for supporting us
buying a ZOHD Delta Strike
User Guide
Inspiring The Future
Stay connected with us through our social media channels:
Contact us: [email protected] [email protected]
Customer service: [email protected]
www.zohd.net
Install the main spar. Attach the wings and secure them with
the provided thumbscrews
Install the vertical stabilizer with the provided thumbscrew.
The nose cone is attached by magnets, providing a quick
release, avoiding damage during hard landings.
Once all your gear is in place you can close the main hatch
Install the Teflon landing skin according to the graphic.
The EDF unit can be accessed through the dedicated hatch.
Always firmly secure that hatch with the provided screws.

10mm
RECOMMENDED THROWS
CG=65mm
This model requires experience to setup and fly. It’s by no means designed for
beginners. If you’re starting in the hobby, please check some of our other products
that will be more suitable for beginners. This is a powerful unit considering the size
and weight and will require you to have strong orientation abilities, specially flying
line of sight. We also recommend you to fly this unit with stabilization (flight controller)
unless you’re extremely skilled with the sticks.
Finally consider adding lead weights to achieve a perfect CG balance. Enjoy!
Install your FPV camera of choice on top of the 180° pan servo.
Min. recommended speed: 30km/h
Max. Speed (with default power combo): 120+km/h
Recommended takeoff weight: 750g
Reflex on elevons: 1.5-2mm at level
Recommended max. Throws: 10mm depending on your style
Recommended expo for manual: 55-70 depending your style/skills
Recommended Battery: 4S 1500-2200 50C or higher. Consider CG