Zonit Z-LOCK User manual

Insert cord
firmly into device
Cord is now locked To release, pull on the
red tabs and remove cord
Cord will detach
from device
1 2 3 4
Ensure nut is backed out
as far as possible
Insert cord
firmly into device
Push and tighten the nut to
initial resistance, then add
1/4 to 1/2 turn to secure.
(Do not over-tighten)
Cord is now locked.
Visually inspect to be sure
connector is fully inserted
1 2 34
FEMALE END
MALE END
To release, loosen nut
as far as possible
Cord will detach
from device
5 6
Do not connect the male and female
ends of the Z-LOCK cord to each
other. Damage may result. The male
plug end should only be inserted into
a PDU style recessed receptacle.
Align nuts as shown to
maximize clearance in
ganged receptacles
USER GUIDE
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................

1790 30th Street | Suite 140 | Boulder, CO | 80301
USER GUIDE
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
Warranty
Please visit www.zonit.com for more information
about Zonit’s Z-LOCK warranty. For warranty
The Z-LOCK™ locking power cord made by Zonit Structured Solutions, LLC is warranted to be free of
defects in materials and workmanship for a period of 3 years from the date of purchase. If the product
becomes defective during the warranty period, we will elect to either repair it or replace it free of
charge. After contacting Zonit Structured Solutions, LLC for a return authorization, send the product
(with the original proof of purchase and freight prepaid) to Zonit Structured Solutions, LLC, 1790 30th
Street #140, Boulder, Colorado, 80301.
This warranty does not include repair or replacement of any connected equipment. This warranty
excludes damage to any Z-LOCK product which has been repaired or altered in any manner by anyone
other than Zonit Structured Solutions, LLC or to any product which has been installed, connected, used,
or otherwise adjusted other than in accordance with written instructions furnished by Zonit Structured
Solutions, LLC. Zonit Structured Solutions, LLC shall also not be obligated to repair or replace the product
which is found to be in need of repair because of damage resulting from accident or misuse. Zonit
Structured Solutions, LLC makes no other express warranty for the product. No agent, dealer, reseller,
representative, or employee of Zonit Structured Solutions, LLC has the authority to increase or alter the
obligations or limitations of this warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHETHER ARISING BY
LAW, CUSTOM, OR CONDUCT, AND THE RIGHTS AND REMEDIES PROVIDED UNDER THIS WARRANTY ARE
EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS OR REMEDIES. IN NO EVENT SHALL ZONIT STRUCTURED
SOLUTIONS, LLC BE LIABLE, WHETHER IN CONTRACT, UNDER ANY WARRANTY, IN TORT (INCLUDING NEG-
LIGENCE), IN STRICT LIABILITY OR OTHER-WISE, FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT
OR OTHER SIMILAR DAMAGES, INCLUDING, BUT NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE,
DAMAGE TO OR LOSS OF EQUIPMENT, LOST PROFITS OR REVENUE, COSTS OF RENTING REPLACEMENTS
AND OTHER ADDITIONAL EXPENSES. ZONIT STRUCTURED SOLUTIONS, LLC’S LIABILITY SHALL NOT IN
ANY EVENT EXCEED THE AMOUNT OF THE PURCHASE PRICE OF THE PRODUCT.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, and some jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from jurisdiction to jurisdiction.
Other Zonit Power Distribution Unit manuals