Zotac ZBOX nano User manual

1
ZOTAC ZBOX nano
ZOTAC ZBOX nano
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the
express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be
registered trademarks or copyrights of their respective companies, and are

respective owners.
Every effort has been made to ensure that the contents of this manual are
correct and up to date. However, the manufacturer makes no guarantee
regarding the accuracy of its contents, and reserves the right to make
changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.

2
ZOTAC ZBOX nano
Table of Contents
 -------------------------------------------------------------------------- 3
 -------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
 --------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
 ------------------------------------------------ 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
--------------------------------------------------------- 8
How to disable integrated IR receiver----------------------------------------------------- 8
How to enable USB 2.0 charge (for S3/S4/Sleep status) ---------------------------- 10
 ------------------------------------------------------- 11
Installing a memory module ----------------------------------------------------------------- 12
Installing a hard disk -------------------------------------------------------------------------- 13
Connecting a S/PDIF cable------------------------------------------------------------------ 15
 ---------------------------------------------------------- 16
--------------------------------------------------------- 18
Mounting the ZOTAC ZBOX nano to a LCD monitor---------------------------------- 18
 --------------------------------------------------------------- 20
Installing an operating system -------------------------------------------------------------- 20
Installing system drivers---------------------------------------------------------------------- 20
--------------------------------------------------------------- 21
  ----------------------------------------------------------- 21
  --------------------------------------------------------------- 21
Using a static IP ---------------------------------------------------------------------------- 21
Using a dynamic IP (PPPoE connection) -------------------------------------------- 22
  ------------------------------------------ 22

3
ZOTAC ZBOX nano







)
)
















Audio







4
ZOTAC ZBOX nano
Safety information
Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for

read the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0and 35.
If you use an extension cord, please use the UL listed cord and make sure that
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.


unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power

¾The power cord or plug is damaged.
¾
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.
,

5
ZOTAC ZBOX nano
Welcome
Congratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following
illustration displays the package contents of your new ZOTAC ZBOX nano. Please contact
your retailer If any of the below items are damaged or missed.

 1 x ZOTAC ZBOX nano mini-PC
 
 4 x Mount screws
 1 x AC Adapter
 1 x Power Cord
 1 x Headphone/SPDIF adapter
 
 1 x User Manual
 
 

6
ZOTAC ZBOX nano
Getting to know your ZOTAC ZBOX nano
Front view
Refer to the diagram below to identify the components on this side of the system
1. 
The power switch turns the mini-PC ON and OFF.
2. 
The hard disk LED blinks when data is being written onto or read from the hard
disk drive
3. 

4. 
The IR receiver is used to receive signals from the IR remote control.
5. 
The built-in memory card reader reads and writes SD/SDHC/SDXC cards used in
devices such as digital cameras, MP3 players, mobile phones and PDAs.
6. 
The headphone / mini-Optical SPDIF jack (3.5mm) is used to connect the

Optical S/PDIF output with the included mini-Optical S/PDIF adapter. The optical
S/PDIF output enables connectivity with digital audio receivers and speakers for
crystal clear digital audio and surround sound from compatible soundtracks.
7. 
The USB (Universal Serial Bus) ports are compatible with USB devices such as
keyboards, mice, cameras and hard disk drives.
8. 
The microphone jack is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.

7
1
2
3
4
5
6 8

7
ZOTAC ZBOX nano
Rear view
Refer to the diagram below to identify the components on this side of the system.
1. 
The supplied power adapter converts AC power to DC power for use with this
jack. Power supplied through this jack supplies power to the mini-PC. To prevent
damage to the mini-PC, always use the supplied power adapter.
2. HDMI output


3. 
The DisplayPort output supports displays with resolutions up to 2560x1600.
4. 
The USB 3.0 port supports SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
5. 

a local area network (LAN) with speeds of 10/100/1000Mbps.
6. eSATA port
The external SATA port is compatible with e.SATA devices such as external hard
drives and Blu-ray drives.
7. 

8. 
The ventilation area is vital for proper system cooling. Do not cover.
1
2
3
4
5 6
4
8
7

8
ZOTAC ZBOX nano


BIOS settings such as integrated IR receiver, and USB 2.0 charge, .
How to disable integrated IR receiver
1. Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS
SETUP UTILITY.
2. Use the arrow keys to navigate to ,
and select 


ZOTAC ZBOX nano
2. Enter  and select .
: enable the internal IR receiver (default)
: disable the internal IR receiver
3. 

10
ZOTAC ZBOX nano
Note: Before charging via USB 2.0 in S5 status, please make sure the Deep S5 (Deep
Sleep inmenu) is disabled.
3. 
How to enable USB 2.0 charge (for S3/S4/Sleep status)
1. In  menu, select .
2. Enter  and select.

11
ZOTAC ZBOX nano
Customizing the ZOTAC ZBOX nano
Before installing hardware, please follow the instructions below to remove the cover
of your ZOTAC ZBOX nano.
1. Remove the four screws securing the bottom cover into place.


12
ZOTAC ZBOX nano
Installing a memory module
1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module
into the slot at a 45 degree angle.

of the memory slot.

13
ZOTAC ZBOX nano
2. Install the hard disk bracket onto a 2.5-inch SATA hard disk with 2 screws.
3. Insert the hard disk into the socket and gently slide into the connector.
Installing a hard disk
1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk
bracket as shown in the image below.

14
ZOTAC ZBOX nano
4. Reinstall the screws for the hard disk bracket.

15
ZOTAC ZBOX nano
Connecting a S/PDIF cable
1. Connect the S/PDIF cable to the mini-Optical S/PDIF adapter.
2. Locate the front panel and connect the mini-Optical S/PDIF adapter to the
headphone / mini-Optical S/PDIF jack.

16
ZOTAC ZBOX nano
Setting up the ZOTAC ZBOX nano
Please connect your peripherals before using your ZOTAC ZBOX nano.

Connect the DisplayPort connector to the DP port.


the USB 3.0 port.


1
2
3

17
ZOTAC ZBOX nano

Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.

Connect one end of an HDMI cable to the HDMI port on the system rear panel
             

by default.)

Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.

Connect the eSATA cable to the eSATA port.

to conserve power.
456
7

18
ZOTAC ZBOX nano
Positioning the ZOTAC ZBOX nano

guarantee proper use, leave 4 inches (10 cm) of spacing in front of the ventilation
holes.
    
          
interference.
Mounting the ZOTAC ZBOX nano to a LCD monitor
             
monitor.
 
Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation.
 

to secure the ZBOX to the mount.


ZOTAC ZBOX nano
3. Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI/DP cable.