ZPE ZPE-AIR-U01 User manual

ZPESYSTEMS.COM
Airflow & Temperature Sensor (USB)
ZPE-AIR-U01
COMPATIBLE WITH
ALL NODEGRID DEVICES
Quick Install Guide
HARDWARE
Velocity Range 0.15 to 1.0 m/s (30 to 200 fpm)
Operating
Temperature 0°C to 60°C (32°F to 140°F)
Supply Power
Requirements 4.5–12 VDC, 35mA
Cable Attached. 4 meters (13 feet)
DESCRIPTION
This sensor immediately notifies you when there is a lack of device airflow.
This provides highly precise readings (up to 200 fpm) via a digital interface
– ensuring you instantly know when a device’s fan slows down or fails.
Control and read status with CLI, Web, SNMP, or Restful APIs.
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Product Specifications ZPE-AIR-U01

Quick Install Guide ZPE-AIR-U01
All rights reserved. September 8, 2022
Let’s set up your Airflow & Temperature Sensor
Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
1
For more information, visit the "Sensor Quick Install Guide" section at:
https://www.zpesystems.com/user-manuals/
3
Ensure minimum Nodegrid OS version meets sensor requirements.
Upgrade Nodegrid OS to minimum version 5.4.1
2
OPTIONAL: To configure data collection in ZPE Data Lake, refer to
Appendix C in the latest ZPE Cloud Manual at:
zpesystems.com/user-manuals/
4
We suggest placing
this product here
*Rack cage may be a
different model or size
Airflow &
Temperature
Sensor
Cable: 4 meters
Any USB Port on a Nodegrid Device
or USB hub connected to Nodegrid hardware
Inset: Nodegrid Hive SR