ZPE ZPE-AIR-U02 User manual

ZPESYSTEMS.COM
Airflow & Temperature Sensor (USB)
ZPE-AIR-U02
COMPATIBLE WITH
ALL NODEGRID DEVICES
Quick Install Guide
HARDWARE
Velocity Range 0.5 to 10.0 m/s (100 to 2,000 fpm)
Operating
Temperature 0°C to 60°C (32°F to 140°F)
Supply Power
Requirements 4.5–12 VDC, 35mA
Cable Attached. 4 meters (13 feet)
DESCRIPTION
Use this sensor to prevent downtime due to HVAC failure. This airflow and
temperature sensor provides highly precise readings (up to 2,000 fpm).
Immediately know when and where your HVAC systems have slowed or
failed, then quickly respond to prevent downtime. Control and read status
with CLI, Web, SNMP or Restful APIs.
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Product Specifications ZPE-AIR-U02

Quick Install Guide ZPE-AIR-U02
Let’s set up your Airflow & Temperature Sensor
Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
1
All rights reserved. September 8, 2022
For more information, visit the "Sensor Quick Install Guide" section at:
https://www.zpesystems.com/user-manuals/
3
Ensure minimum Nodegrid OS version meets sensor requirements.
Upgrade Nodegrid OS to minimum version 5.4.1
2
OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the
latest ZPE Cloud Manual at: https://www.zpesystems.com/user-manuals/
4
We suggest placing
this product here
*Rack cage may be a
different model or size
Airflow &
Temperature
Sensor
Cable: 4 meters
Any USB Port on a Nodegrid Device
or USB hub connected to Nodegrid hardware
Inset: Nodegrid Hive SR