zSpace zView User manual

zView Assembly Instructions
for zSpace 200 1x 1x
1x
4x
1x
1x
770-00018-01 GUIDE, QUICK START, ZVIEW II REV D
1
Align bracket over the
4 threaded holes.

4 M4 screws.
When aligning, make sure
threads are on lower half.
2
Thread knurled nut onto


3 4
Pull U stand out
before threading in

Pull out to one of the

Preferably the 30
degree viewing angle
Thread knurled nut

56
7

cam to have clear view of user’s hand and the screen.
8

between the back panel and U stand.
Thread tubing into the bracket.






1x

910
11


against webcam
12
Finally, turn the
knurled nut to





Connect the webcam’s USB cable into the display monitor’s

zspace.com/login and register for a zSpace account. Upon

[e-mail] to authorize that account for access
to zView.
770-00018-01 GUIDE, QUICK START, ZVIEW II REV D