Zte ZXHN F660 Operating and installation instructions

ZXHN F660 Product
Description

ZXHN F660 Product Description
ZTE Confidential & Proprietary 1
ZXHN F660 Product Description
Version
Date
Author
Reviewer
Notes
V1.0
2014/2/17
Liu BaoQuan
Liu Feng
Not open to the Third Party
V1.1
2014/7/9
Liu BaoQuan
Liu Feng
Not open to the Third Party
© 2015 ZTE Corporation. All rights reserved.
ZTE CONFIDENTIAL: This document contains proprietary information of ZTE and is not to be disclosed or used
without the prior written permission of ZTE.
Due to update and improvement of ZTE products and technologies, information in this document is subjected to
change without notice.

ZXHN F660 Product Description
2ZTE Confidential & Proprietary
TABLE OF CONTENTS
1Overview ............................................................................................................ 5
1.1 Product Positioning.............................................................................................. 5
1.2 Network Applications ........................................................................................... 6
2Highlights........................................................................................................... 6
2.1 High Reliability..................................................................................................... 6
2.2 Rich Interfaces at User Side ................................................................................ 7
2.3 Convenient and Secure Wi-Fi Access.................................................................. 7
2.4 USB File Storage and Sharing Services............................................................... 7
2.5 Eco-Friendly Design............................................................................................. 8
2.6 Convenient Installation and Management............................................................ 8
3Hardware Features............................................................................................ 8
3.1 Device Interfaces................................................................................................. 8
3.2 Device Buttons..................................................................................................... 9
3.3 LED Indicators................................................................................................... 10
4Functions......................................................................................................... 12
4.1 GPON Function ................................................................................................. 12
4.1.1 Bandwidth Allocation.......................................................................................... 13
4.1.2 GEM Adaptation ................................................................................................ 13
4.1.3 T-CONT............................................................................................................. 13
4.1.4 Operation and Maintenance............................................................................... 13
4.1.5 Optical Link Monitoring and Diagnosis............................................................... 14
4.2 Wi-Fi Function.................................................................................................... 14
4.3 VoIP Function.................................................................................................... 15
4.4 USB Function..................................................................................................... 15
4.5 Data Forwarding Function.................................................................................. 16
4.5.1 MAC Address Function...................................................................................... 16
4.5.2 VLAN Function................................................................................................... 16
4.6 QoS Function..................................................................................................... 17
4.7 Multicast Function.............................................................................................. 17
4.8 L3 Function........................................................................................................ 18
4.9 IPv6 Function..................................................................................................... 18
4.10 Management Function ....................................................................................... 19
4.11 Security Function............................................................................................... 20
4.11.1 Data Security of the GPON Interface ................................................................. 20
4.11.2 Traffic Suppression............................................................................................ 20
4.12 Alarm Function................................................................................................... 20
4.13 Performance Statistic Function .......................................................................... 21

ZXHN F660 Product Description
ZTE Confidential & Proprietary 3
4.13.1 Statistic of Ethernet Port Performance Parameter.............................................. 21
5Technical Indices and Parameters................................................................. 22
5.1 Physical Structure, Environmental and Electrical Indices................................... 22
5.2 Interface Indices and Parameters ...................................................................... 23
5.3 Key Technical Indices........................................................................................ 24
6Standard Compliance...................................................................................... 24
7Glossary........................................................................................................... 26

ZXHN F660 Product Description
4ZTE Confidential & Proprietary
FIGURES
Figure 1-1 The ZXHN F660................................................................................................. 5
Figure 1-2 Application Scenario of the ZXHN F660............................................................. 6
Figure 3-1 The Rear Panel of the ZXHN F660.................................................................... 8
Figure 3-3 LED Indicators of the ZXHN F660.....................................................................10
TABLES
Table 3-1 Description of the ZXHN F660’s Interfaces ......................................................... 9
Table 3-2 Description of the ZXHN F660’s Buttons............................................................. 9
Table 5-1 Specifications and Environmental Indices of the ZXHN F660.............................22
Table 5-2 GPON Interface Indices of the ZXHN F660........................................................23
Table 5-3 Key Technical Indices of the ZXHN F660...........................................................24
Table 6-1 Standard Compliance of the ZXHN F660...........................................................24
Table 7-1 Glossaries of the ZXHN F660 ............................................................................26

ZXHN F660 Product Description
ZTE Confidential & Proprietary 5
1 Overview
1.1 Product Positioning
The ZXHN F660, a GPON optical network terminal (ONT) for home users, is designed for
the fiber to the home (FTTH) scenarios, supports desktop mounting and wall mounting.
The ZXHN F660 complies with the ITU-T G.984 standard, provides 2.488 Gbps downlink
and 1.244 Gbps uplink at network side, and provides 4GE ports, two Phone ports, one
802.11b/g/n(2*2 @2.4GHz) Wi-Fi interface with two External antennas, one USB port at
user side. Home users can easily access voice services, video services and many other
kinds of high-speed broadband services by the ZXHN F660’s rich interfaces.
Figure 1-1 The ZXHN F660
ZXHN F660 with External Antenna

ZXHN F660 Product Description
6ZTE Confidential & Proprietary
1.2 Network Applications
As a GPON ONT designed for the FTTH scenarios, the ZXHN F660 provides four
10/100/1000M network interfaces, two Phone interfaces, one 802.11b/g/n(2*2 @2.4GHz)
Wi-Fi interface and one USB interface for home users. See Figure 1-2 for the application
scenario of the ZXHN F660:
Figure 1-2 Application Scenario of the ZXHN F660
2 Highlights
2.1 High Reliability
The full-service access capability featuring high bandwidth, high performance, high
reliability, and easy operation, administration and maintenance (OMCI/TR-069)
meets the continuously changing requirements of the customer, protects the legacy
investment, and enhances the value of the operator’s network.
The highly reliable heat dissipation design guarantees its stable operation.
The dual image ensures uninterrupted services during software downloading or
upgrading, thereby enhancing software reliability.

ZXHN F660 Product Description
ZTE Confidential & Proprietary 7
The highly reliable lightning protection design provides lightning and surge
protection of 4 kV for the adapter, 1.5 kV for the Phone interfaces, and 1.5 kV for
the Ethernet ports.
2.2 Rich Interfaces at User Side
Provides four GE ports, two Phone ports, one Wi-Fi and one USB port at user side
to meet the demands of multiple terminal equipment access
Users can access the PC, IPTV STB, tablet, laptop, smart phone, phone, fax and
other terminal equipment based on personal preferences, to fully enjoy all kinds of
Internet services
2.3 Convenient and Secure Wi-Fi Access
Users can build a convenient and secure wireless LAN, and access the Internet
flexibly and reliably
Complies with the IEEE 802.11b/g/n(2*2 @2.4GHz) standard, provides high-speed
Wi-Fi access function
Supports shared key authentication, WEP authentication, WPA-PSK, WPA2-PSK,
WPA2-Enterprise and both mixed-mode security authentication, and ensure safe
and reliable home Wi-Fi access
2.4 USB File Storage and Sharing Services
Sharing photos, music, video and other documents though the USB Interface, which
can connect to a USB storage device. Family members can free share by this
function.
USB Host interface, in line with the 2.0 specification
Supports the FAT, FAT32, NTFS partition format and most of the storage devices
on the market

ZXHN F660 Product Description
8ZTE Confidential & Proprietary
2.5 Eco-Friendly Design
Automatically switches to energy-saving mode according to traffic status and
busy/idle status of the port.
Complies with CE, RoHS and WEEE standards.
2.6 Convenient Installation and Management
Flexible installation mode: on the desktop, on the wall, or in the information box
Remote batch upgrade, fault analysis, port loopback, link detection via the OMCI
Software upgrading and management via the EMS/OLT
Software upgrading and management via TR069
WEB management
Off-link & batch configuration
3 Hardware Features
3.1 Device Interfaces
The ZXHN F660's device interfaces as shown in Figure 3-1, include one optical interface
at network side, four 10/100/1000M Ethernet interfaces, two Phone interfaces, Wi-Fi and
one USB interface at user side, one Power interface
Figure 3-1 The Rear Panel of the ZXHN F660

ZXHN F660 Product Description
ZTE Confidential & Proprietary 9
ZXHN F660 with External Antenna
Table 3-1 Description of the ZXHN F660’s Interfaces
Device Interface
Description
PON(PON)
SC/APC interface for fiber connection.
Fully compliant to ITU-T G.984.x GPON standards
Phone
Supports two Phone interfaces with RJ-11 connector
LAN
Supports four 10/100/1000 Base-T Ethernet
interfaces with RJ-45 connector
Supports half /Full Duplex and flow control, auto
negotiation or manual configuration
Supports MDI/MDIX auto-sensing
Power
12V Power Input Interface
+12V DC (via external AC/DC adapter: 90–240V,
50/60Hz AC input, 12V DC output )
USB
Support USB host interface, 2.0 standard
3.2 Device Buttons
The ZXHN F660's device Buttons as shown in Figure 3-1 and Figure 3-2 includes one
reset button, one power button, one Wi-Fi button and one WPS button.
Table 3-2 Description of the ZXHN F660’s Buttons
Device Button
Description
Reset
When the device is powered on, press the button for 1
second to restart the device. The user setting
information is not lost.
When the device is powered on, press the button for
more than 5 seconds to restore the device to the
factory default settings.
ON/OFF
Power on/off
Press the button (ON), the device is turned on
Press the button again (OFF), the button pops, and
the device is turned off

ZXHN F660 Product Description
10 ZTE Confidential & Proprietary
Device Button
Description
Wi-Fi
Wi-Fi on/off
WPS
Start WPS processes
3.3 LED Indicators
Figure 3-2 LED Indicators of the ZXHN F660
Table 3-3 Description of the ZXHN F660’s LED Indicators
LED
Indicator
Definition
Color
LED Indicator
Power
Power supply
status
indicator
Green
OFF: The ZXHN F660 is powered off.
Constantly ON: The ZXHN F660 is
powered on.
PON
PON status
indicator
Green
OFF: The ZXHN F660 has not started
the registration process.
Constantly ON: The ZXHN F660 has
completed the registration process.
Flashing: The ZXHN F660 is
registering.
LOS
Optical signal
status
indicator
Red
OFF: The receiving optical power is
normal.
Constantly ON: The optical module of
the PON interface is powered off.
Flashing: The receiving optical power is
lower than the receive sensitivity of the
optical receiver.

ZXHN F660 Product Description
ZTE Confidential & Proprietary 11
LED
Indicator
Definition
Color
LED Indicator
Internet
Internet status
indicator
Green
OFF: The ZXHN F660 is not powered
on or ethernet connection does not exi.
Constantly ON: The internet
connection has been established
(routing connection has the correct IP
address or bridge link is normal);
Flashing: The data is transmitted via
internet connection.
LAN1
LAN2
LAN3
LAN4
Ethernet
interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the Ethernet interface is not
connected to any terminal device.
Constantly ON: The Ethernet interface
is connected but no data is transmitted
via the Ethernet interface.
Flashing: The data is transmitted via
the Ethernet interface.
Phone1
Phone2
Phone status
indicator
Green
OFF: The ZXHN F660 is not powered
on or unable to register on the soft
switch/IMS.
Constantly on: The ZXHN F660 has
registered on the soft switch/IMS but no
service flow is being transmitted.
Flashing: Data is being transmitted.
Wi-Fi
Wi-Fi interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the WLAN interface is forbidden.
Constantly ON: The WLAN interface
has been started.
Flashing: There is data transmission
via the WLAN interface.
WPS
WPS status
indicator
Green or
multiple
colors
Yellow LED flashing: The ZXHN F660
is performing code matching.
Red LED flashing: The ZXHN F660
detects session overlapping.
Green LED constantly ON: Code
matching successful.

ZXHN F660 Product Description
12 ZTE Confidential & Proprietary
LED
Indicator
Definition
Color
LED Indicator
USB
USB interface
status
indicator
Green
OFF: The ZXHN F660 is not powered
on or the USB interface is not
connected.
Constantly ON: The USB interface is
connected and works in Host mode, but
no data is transmitted via the USB
interface.
Flashing: There is data transmission
via the USB interface.
4 Functions
4.1 GPON Function
ITU-T G.984 compatible
Flexible mapping between GEM port and T-CONT
Priority level queuing and scheduling of the upstream traffic
AES-128 encryption
FEC
Five types of T-CONT
Upstream traffic classification based on VLAN ID and 802.1p
Multicast GEM port
SN, password, and SN+password authentication
Auto-restart and recovery in power supply failure

ZXHN F660 Product Description
ZTE Confidential & Proprietary 13
4.1.1 Bandwidth Allocation
Static bandwidth allocation
Adopts static bandwidth allocation mechanism in compliance with ITU-T
G.983.1
Dynamic bandwidth allocation (DBA)
Adopts fair DBA policy for the same CoS services during traffic congestion
Dynamic bandwidth status report mode complies with ITU-T G.984.3
4.1.2 GEM Adaptation
GEM mode
GEM frame mapping to GTC payload
Ethernet data frame mapping to GEM frame; Ethernet frame mapping into GEM
ports based on VLAN, CoS, or VLAN+CoS
4.1.3 T-CONT
Five types of T-CONT
T-CONT as the basic unit of the upstream service
T-CONT allocation based on the user and CoS; mapping to T-CONT queue based
on the CoS value or GEM port
T-CONT queue scheduling mode of WRR, SP, or WRR+SP
4.1.4 Operation and Maintenance
Physical layer operations and maintenance (PLOAM) defined in ITU-T G.984.3
OMCI defined in ITU-T G.984.4 \G.988 and OMCI extension

ZXHN F660 Product Description
14 ZTE Confidential & Proprietary
4.1.5 Optical Link Monitoring and Diagnosis
The optical module diagnostic monitoring interface monitors the parameters
including operating temperature of the optical module, supply voltage, bias current,
transmission power, receiving power, etc.
ONT long-time light emitting detection and auto shutdown.
Turn on or off the power supply of the optical transmitter under the control of the
OLT.
4.2 Wi-Fi Function
The Wi-Fi function provides an easy, convenient, flexible, and low-cost method for the
users to access the internet via the wireless LAN network. The Wi-Fi function complies
with IEEE802.11n (2x2) and offers a maximum PHY layer link rate of 300 Mb/s.
Frequency: 2.4 GHz
IEEE802.11b, IEEE802.11g, and IEEE802.11n compliant
Auto and manual channel selection
Auto and manual rate control
Transmission power control
Four SSIDs
Maximum 32 users
SSID broadcast enabling/disabling function
Access control based on MAC address
Shared key authentication and 128-bit WEP authentication
WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK and WPA2-Enterprise security
authentication

ZXHN F660 Product Description
ZTE Confidential & Proprietary 15
WPS
WMM
Maximum TX power up to 100mW
Two External antennas
4.3 VoIP Function
SIP and H.248 compliant
Support in-band DTMF tone sending/receiving and out-band DTMF signaling
with RTP, as per RFC2833
32ms echo cancellation
G.711 a/u law, G.729, and G.722 coding/encoding algorithm
Voice Activity Detectors (VAD) and Comfort Noise Generation (CNG)
T.30 fax: fax transparent transmission (uncontrolled, RTCP control, and SS control)
T.38 fax
Supplementary services: caller ID display, call waiting, call forwarding, call transfer,
three way calling, etc
4.4 USB Function
One USB host interface
Full-speed and high-speed USB 2.0 interface
USB fast file backup, fast recovery.

ZXHN F660 Product Description
16 ZTE Confidential & Proprietary
4.5 Data Forwarding Function
4.5.1 MAC Address Function
MAC address learning
MAC address aging
MAC address learning enable/disable
MAC address learning limit
MAC address binding to a user port. Only controls the input side of the port.
Anti-MAC transferring (spoofing)
Forbids the MAC addresses learned from a user port to be transferred to other
user port before aging.
Forbids the MAC addresses learned from uplink port to be transferred to the
user port.
MAC filtering
Both the source and destination MAC addresses support the blacklist and the
whitelist function.
4.5.2 VLAN Function
IEEE 802.1q VLAN with the VLAN ID from 1 to 4094
VLAN tagging/untagging on the user port
VLAN overwrite function on the user port
1:1 mapping between the user port (physical port or logical port) and VLAN
VLAN-based data forwarding
VLAN-based packet filtering

ZXHN F660 Product Description
ZTE Confidential & Proprietary 17
VLAN untagged mode, tagged mode and double tagged mode
VLAN tag
Adds S-Tag to the untagged or priority tagged frames from the user port as per
the needs.
Adds C-Tag and S-Tag to the untagged or priority tagged frames from the user
port as per the needs.
4.6 QoS Function
Service flow rate limit based on the user port, service flow, and GEM port
Upstream service flow classification based on the physical port and source MAC
address, destination MAC address, VLAN ID, VLAN priority level (IEEE802.1D),
Ethernet type (such as IP, PPPoE, ARP/RARP), destination IP address, source IP
address, IP protocol type (TCP, UDP, ICMP, IGMP), IP DSCP, and TCP/UDP
Ethernet priority level tagging of the upstream services based on the DSCP value
Ingress rate limit
Egress shaping
4.7 Multicast Function
IGMP v1/v2 Snooping
Multicast group per LAN port is 256
Fast leave time, which is the time since user terminal sends an IGMP leave
message to the ONU equipment stops the multicast data packet, is less than 20ms.
Support MVLAN

ZXHN F660 Product Description
18 ZTE Confidential & Proprietary
4.8 L3 Function
Data forwarding and routing
Bridging, routing, or hybrid mode (bridging and routing)
Static routing
RIP v1/v2 dynamic routing
Address management
DHCP Server/Client
PPPoE Client/Pass Through
DNS Client/Relay
SNTP client
NAT
ALG function: achieves H.323, SIP, FTP, SNMP, SMTP, Netmeeting, PPTP, L2TP,
IPSec, RTSP private network traversal function; provides separate switches for
each ALG function.
4.9 IPv6 Function
IPv6 protocol packets transparent transmission
IPv4/IPv6 Dual Stack (Only support Internet and IPTV application, but not support
VoIP and TR069 application.)
IGMP protocol packets transparent transmission
MLD v1 and MLD snooping
IPv6 DS-Lite