Zte MC888 User manual

MC888
Let’s go
Getting started with your device

1
1. Prepare
• Avalidnano-SIMcard.
• Viewthelabelonyourdevicetogetthedefaultinformation.

2
2. Insert the nano-SIM Card
Opentheslotcoveratthebottomofthedeviceandinsertthenano-SIM
card.

3
3. Power on Your Device
Connectthepoweradaptertoyourdeviceandthenyourdevicewillbe
poweredonandconnecttotheInternetautomatically.

4
4. Access the Internet
• 
Wi-Fi:GetthedefaultSSIDandpasswordonthelabelandconnect
totheWi-Finetworkwithyourmobiledevice,andthenaccessthe
Internet.

5
• 
Network cable(RJ45):ConnectwiththecomputerviaLANports
andthenaccesstheInternet.

6
5. Change Your Device Settings
Youcanchangethedevicesettingsbyloggingintothe5GCPE
managementwebpage.
1. ViewthelabelonyourdevicetogetthedefaultDevice Manager
Website IP address and Password.
2. LaunchtheInternetbrowserandentertheDevice Manager Website
IP addressintheaddressbar.
3. InputthepasswordandthenclickLogin.
4. Afterthe5GCPEmanagementwebpageisopened,youcan
changetheWi-FiSSID,passwordorothersettings.

7
Dual-network Modes
Yourdevicesupportsthedual-networkmodes(AutomaticModeand
HybridMode).Youcanusethenano-SIMcardandbroadbandservice
networkport(WAN)toaccesstheInternet.
1. Insertthenano-SIMcardandconnectthebroadbandservice
networkporttotheLANport1.
2. Logintothe5GCPEmanagementwebpage.
3. ChangeoperationmodetoAutomatic or Hybrid Mode.Thedevice
willberestartedautomatically.
• 
Automatic:Thewirednetworkisusedasthedefaultnetwork.
Ifthewirednetworkisdisconnected,youcanusethenano-
SIMcardtoaccesstheInternet.
• 
Hybrid Mode:Youcanusetwotypesofnetworkstoaccess
theInternetatthesametimetoincreasethenetworkspeed.
Ifoneisdisconnected,theotherstillworksproperly.
NOTE:
PleasedisconnectfromtheInternetrstandthenyoucanchange
mode.
4. Setthewirednetworkparametersgivenbyyourserviceprovider.
5. UseyourclientstoaccesstheInternet.

8
Cable Broadband Mode
Yourdevicesupportsthecablebroadbandmodeandyoucanusethis
servicefromyourserviceprovidertoaccesstheInternet.
1. ConnecteitherofthetwoLANportsandthebroadbandservice
networkportwithanetworkcable.
2. Logintothe5GCPEmanagementwebpage.
3. Changeoperationmodeto Cable Broadband Mode.
NOTE:
PleasedisconnectfromtheInternetrstandthenyoucanchange
mode.