Zte Unite II User manual

LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
4G LTE™ is not available in all areas. See uscellular.com/4G for complete coverage details. 4G
LTE™ service provided through King Street Wireless, a partner of U.S. Cellular. LTE™ is a
trademark of ETSI.
Version No. : 1.0
Edition Time: 1.2014
NOTE:
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged
work in such space may cause excessive heat and raise ambient temperature, which may lead to
automatic shutdown of the device for your safety. In the case of such event, cool the device in a
well-ventilated place before turning on for normal use.

Contents
Getting Started .................................................................................................................. 1
Introduction................................................................................................................... 1
Outline and Parts........................................................................................................... 1
Indicators....................................................................................................................... 1
Inserting the SIM Card and Battery.............................................................................. 2
Inserting the microSDHC Card..................................................................................... 3
Powering On/Off Your Device ..................................................................................... 3
Sleep Mode ................................................................................................................... 4
Charging Your Device.................................................................................................. 4
Internet Access.................................................................................................................. 4
Configuring Your PC.................................................................................................... 5
Connecting to Your Device........................................................................................... 6
Accessing the Internet................................................................................................... 8
Disconnecting from the Internet ................................................................................... 8
Navigating the Device....................................................................................................... 8
Resetting Your ZTE UniteTM II ...................................................................................... 8
Device Info.................................................................................................................... 9
Connection Info............................................................................................................. 9
Connected Device ......................................................................................................... 9
Settings.......................................................................................................................... 9
WPS ............................................................................................................................ 10
Web User Interface Configuration.................................................................................. 10
Accessing the Configuration Page.............................................................................. 10
Login........................................................................................................................... 10
Settings............................................................................................................................ 11
Quick Settings............................................................................................................. 11
Network Settings......................................................................................................... 14
Wi-Fi Settings ............................................................................................................. 17
Device Settings ........................................................................................................... 20
Firewall ....................................................................................................................... 22
Router Settings............................................................................................................ 26
Dial *228..................................................................................................................... 26
Information...................................................................................................................... 27
Device Information ..................................................................................................... 27
Statistics...................................................................................................................... 27
Data Limit Settings ..................................................................................................... 27
File Sharing..................................................................................................................... 28
Sharing SD Card via USB Cable ................................................................................ 28
Sharing SD Card via Web Browser ............................................................................ 28
Messages......................................................................................................................... 29
Operating Messages in Native .................................................................................... 29
Operating Messages in SIM Card............................................................................... 30
Configuring Messages................................................................................................. 30
Warning and Notice........................................................................................................ 31
To the Owner .............................................................................................................. 31

Using Your Device...................................................................................................... 31
Using Battery .............................................................................................................. 31
Limited Warranty........................................................................................................ 32
Limitation of Liability................................................................................................. 32
Radio Frequency (RF) Energy (Only for US Market)................................................ 32
FCC Compliance (Only for U.S. Market)................................................................... 33
Disposal of Your Old Appliance................................................................................. 33
Troubleshooting.............................................................................................................. 34

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 1
Getting Started
Introduction
ZTE UniteTM II is a 4G LTE™ mobile hotspot device, using a 4G LTE™network. The client devices can
connect to ZTE UniteTM II via Wi-Fi. The device supports data services, enabling you to communicate
anytime and anywhere.
Outline and Parts
The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
1.Power Button
Press and hold the Power button to switch on/off the device.
2.Charger/USB port
Charge your device.
3.OK Key
Enter or select an item.
4.Left Key
Check the on-screen menu from right to left.
5.Right Key
Check the on-screen menu from left to right.
6.Back Key
Go back to the previous screen.
7. LCD Screen
It indicates the signal type, signal strength, battery, Wi-Fi, etc.
8.microSDHC card slot
It is where you insert the microSDHC card.
Indicators
When the device is powered on, the following icons will appear on the LCD screen, with the
corresponding indicators listed in the table below:

ZTE UniteTM II User Manual
2 Confidential and Proprietary Information of ZTE CORPORATION
Icon
Indication
Icon
Indication
Network signal strength.
Roaming network indication.
Network type. 1X/3G/4G LTE™icons
will appear on the LCD screen according
to the connected network.
The device is connected to the
Internet.
Connected to the Internet manually.
There are new messages or unread
messages.
Wi-Fi Status and number of the connected
users.
The message inbox is full.
Battery is low.
Show and check the device
information.
Battery power indication.
Show and check the data
connection information.
The battery is full.
Show and check the clients
connected to your device.
Set the WPS function.
Set your device.
Inserting the SIM Card and Battery
1. Remove the back cover.
2. Insert the SIM card into the SIM card slot.
3. Insert the battery as shown with the contacts located against the metal springs, and press the battery
down into the case.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 3
4. Close the back cover.
Inserting the microSDHC Card
NOTE:
MicroSDHC logo is a trademark of SD-3C, LLC.
MicroSDHC card is sold separately.
1. Pull the microSDHC card cover out of the card slot.
NOTE:
Do not remove with excessive force.
2. Insert the microSDHC card into the microSDHC card slot, as shown below. You will hear a click when
the microSDHC card locks in place.
3. Close the microSDHC card cover.
Powering On/Off Your Device
Press and hold the Power button to switch on/off the device.

ZTE UniteTM II User Manual
4 Confidential and Proprietary Information of ZTE CORPORATION
NOTE:
The device is powered on when the LCD screen lights up.
Sleep Mode
When using battery supply and no users are connected, the device will enter sleep mode after a
specified time.In the sleep mode, the Wi-Fi function will be disabled. Press the Power button to
wake up the device and enable the Wi-Fi function, and the LCD screen will be turned on.
NOTE:
Only the Wi-Fi function will be disabled when the device is connected via USB and no user is
connected. Press the Power button to enable the Wi-Fi function.
Charging Your Device
You can charge your device by using the USB cable or adapter.
Use the USB cable to connect your device and PC directly.
Use the adapter and USB cable to connect the wall outlet and your device.
NOTE:
Do not use excessive force to insert the plug.
Internet Access
You can connect up to 10 Wi-Fi enabled devices at one time including computers, tablets, smartphones
and more.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 5
Configuring Your PC
Follow the steps for Windows XP to configure the Wireless Internet Protocol for your
connection.
NOTE:
Wireless Network Connection is used for Wi-Fi connection.
1. Right-click My Network Places and then select Properties.
2. Right-click the Wireless Network Connection, and then select Properties.
3. Select Internet Protocol (TCP/IP), and then click Properties.

ZTE UniteTM II User Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
4. Select these two items, and then click OK to finish the configuration.
Connecting to Your Device
1. Power on your device. It will take 1-2 minutes to power up.
2. Use your Wi-Fi application on the client to search for available wireless networks.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 7
3. Select the SSID of your device, and then click Connect.
NOTE:
Please check the label on your device to get the default SSID.
4. Input the password, and then click Connect.
NOTE:
You may need to input the password for Wi-Fi connection. Please check the label on your device
to get the default password.
5. Your client will connect to the Unite II.

ZTE UniteTM II User Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
Accessing the Internet
1. Switch on the device.
2. Connect the client to your device.
3. After the client is connected to your device successfully, you can access the Internet.
Disconnecting from the Internet
Log into the Web User Interface Configuration page, click the Disconnect button at the Home
page.
NOTE:
Powering off the device can also terminate the Internet connection.
Navigating the Device
Press and hold the Power button to turn on the ZTE UniteTM II. The screen lights up to indicate
the device has turned on and the following icons will appear after initialization.
Resetting Your ZTE UniteTM II
Simply press and hold the Reset button on right side of the device bottom surface for 3 seconds to restore

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 9
your ZTE UniteTM II to the factory default settings, as shown below.
Device Info
Select the device Info icon and press the OK Key to check the WAN information. Use the Left and
Right key to view the following information:
Network Name (SSID): Displays the default SSID.
Wi-Fi Password: Displays the default Wi-Fi password.
Web portal Login: Displays the login URL of the web user interface.
Admin Password: Displays the default login password of the web user interface.
Mobile Number: Displays your mobile number.
MEID (H) / IMEI (D): Displays the MEID (H) / IMEI (D).
Firmware Version: Displays the firmware version.
Hardware Version: Displays the hardware version.
Connection Info
Select the connection info icon and press the OK Key to check the connection information.
Connected Device
Select the connected device icon and press the OK Key to check the information of the devices
connected to your device.
Settings
Select settings icon and press the OK Key to check the settings. Use the Left and Right key to
scroll to the desired menu.
Wi-Fi Settings: Enable or disable Wi-Fi function.
Network Select: Select the network type.
Software Update: Update the software.
Sound Alert: Turn on or off the sound alert. It is on by default, so you will hear an alert when there is
one or more device connected to your ZTE UniteTM II.
Screen Timeout: Set time for screen timeout.
Dial *228: Active your SIM card manually in 1X network.

ZTE UniteTM II User Manual
10 Confidential and Proprietary Information of ZTE CORPORATION
Messages Settings: Turn on or off the Receive Messages during power up.
NOTE: By disabling the Text Message feature you will not receive any incoming messages when the
device powers up in a 4G LTE™ network. You will still receive Text Messages in 3G networks. To
receive messages when the device powers on please enable the Text Messages feature.
WPS
Select the WPS icon and press the OK Key to launch the Wi-Fi Protection Setup.
Web User Interface Configuration
Accessing the Configuration Page
1. Make sure there is a connection between your device and the client.
2. Launch the Internet browser and enter http://192.168.1.1 or http://uscc.hotspot in the address
bar.
NOTE:
It is recommended that you use IE (7.0 or later), Firefox (15.0 or later), Opera (10.0 or later), Safari (4.0
or later), Google Chrome (10.0 or later).
3. The login page appears as follows. The following figure is only for your reference.
Login
On the Web User Interface Configuration page, input the password (please select Device Info on the LCD
screen to get the default password). Click Login to log in the device.
The Web User Interface is divided into three parts.
Index: Shows the configuration list for your device
Content: Shows the detailed configuration.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 11
System Information: Shows the system status and different kinds of tips.
Battery indicator
: Shows the battery level, 4 stages from none to high .
Signal strength
: Shows the network signal intensity, 5 stages from none to strong .
Internet status
: Connected to the Internet.
: Disconnected from the Internet.
Wi-Fi strength
: Wi-Fi status and number of the connected users. The maximum number is 10.
Settings
•Do not modify any settings unless instructed by your service provider.
•Please disconnect the device from the network before changing the settings.
Quick Settings
1. In the main interface click Settings > Quick Settings.
2. Read the guide carefully, and then click Next.
3. Set PPP Profile Configuration in the following figure and then click Next.

ZTE UniteTM II User Manual
12 Confidential and Proprietary Information of ZTE CORPORATION
4. Set PPP Authentication in the following figure and then click Next.
5. Set SSID Configuration in the following figure and then click Next.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 13
Service Set Identifier (SSID) is used to uniquely identify your WLAN. If you enable Broadcast
Network Name (SSID), the gateway will broadcast the SSID, and other devices can detect and connect
to it.
6. Set Security Configuration in the following figure and then click Next.
Encryption will keep your traffic from being unauthorized monitored and accessed, select one
encryption mode from the list, and then set key and/or algorithm for it.
7. Show the configuration in the following figure:

ZTE UniteTM II User Manual
14 Confidential and Proprietary Information of ZTE CORPORATION
Make sure that all the parameters shown in the figure are correct, and then click Apply.
Network Settings
Dial-up Settings
Select Settings > Network Settings > Dial-up Settings. The Dial-up Settings page is shown in the
following figure. You can set the WAN connection mode here. The default mode is Automatic.
Network Selection
Select Settings > Network Settings > Network Selection. The Network Selection page is shown in the
following figure.

ZTE UniteTM II User Manual
Confidential and Proprietary Information of ZTE CORPORATION 15
•LTE/CDMA: Device connects to LTE/CDMA network.
•3G Auto: Device connects to 3G network.
Click Apply to confirm your configuration.
NOTE:
To change the current settings, please disconnect from the network first.
APN Setting
Select Settings > Network Settings > APN Setting. The APN parameters are shown in the following
figure.
•Click Set as default to set current profile as the default profile.

ZTE UniteTM II User Manual
16 Confidential and Proprietary Information of ZTE CORPORATION
•Click Add New to access the following figure:
Enter the related parameters (please see following table), and then click Apply to add a new profile.
Parameter
Function
Mode
If a fixed APN is provided by your service provider, select Manual APN.
Otherwise, please select Auto APN, and the device will automatically obtain
parameters.
Profile Selection
Choose one profile from the list.
PDP Type
Choose a PDP type from the drop-down list, IPv4 / IPv6 / IPv4&IPv6.
Profile Name
Type the profile name.
APN
Type the APN string.
DNS Mode
Set DNS mode.
Authentication
Password Authentication Protocol (PAP) provides a simple method without
encryption for the peer to establish its identity using a 2-way handshake.
Challenge-Handshake Authentication Protocol (CHAP) is used to periodically
verify the identity of the peer using a 3-way handshake.