ZTechnik Z2450 Installation instructions

TOOLS REQUIRED:
3mm Allen Wrench
PARTS LIST
Index Description Qty.
1 VStream Wind hield, Quantum Coated Lexan® polycarbonate 1
2 Compre ion Limiter 4
ZTechnik PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] / www.Z Technik.com / e mail: [e-mail]
©2006 National Cycle, Inc. Page 1 of 2 10-118525-000 09/08 ev. B 10/10
INSTALLATION
etain all fasteners, as they will be reused.
To facilitate reassembly, note the orientation
of Covers and Bracket as you remove them in steps 1
and 2.
1. Carefully remove the two covers on outside of stock
windshield.
2. emove the four screws that hold the bracket and stock
windscreen in place. Store stock windscreen it will not be
reused.
3. Place your VStream Windscreen into position and install
to motorcycle using the original screws, Compression
Limiters (one Compression Limiter into each hole on wind-
screen), brackets and covers.
5. Tighten the bolts firmly. Do not over tighten. (3mm Allen
Wrench)
Right and left ide of motorcycle i determined while
itting on the bike.
INSTALLATION AND OWNE ’S MANUAL
Z2450, Z2461 and Z2462 VStream Windscreen
for K 1200 LT
Clear Quantum Coated Lexan® Polycarbonate
Thank you for purchasing a ZTechnik product. ead these instructions carefully and thoroughly before beginning
work. Dealers if installing this windshield for a customer please give them this manual. It contains information
needed to properly maintain and use this product.
AAtttteennttiioonn:: Special notes and cautionary measures which
can prevent damage to the accessory or motorcycle.
NNoottee:: Tips for facilitation of operation, control
and adjustment, as well as maintenance work.
VStream® windshield patent no. 7,387,328

ZTechnik PO Box Maywood, IL 60153-0158 USA
708-343-0400 / Fax: [phone] / www.Z Technik.com / e mail: info@Z Technik.com
©2006 National Cycle, Inc. Page 2 of 2 10-118525-000 09/08 ev. B 10/10
N1401-01 N1410-01
Never ride your motorcycle with loose accessory mounting hardware. Check the hardware for tightness regularly.
Today's motorcycles are built with enough frame rigidity to withstand the moderate loads imposed on them by the foreseeable addi-
tion of an accessory(ies). If an accessory(ies) adversely affects your motorcycle's stability, immediately remove the accessory(ies).
Do not ride a motorcycle that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions con-
cerning handling problems associated with an accessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufac-
turer.
ZTechnik 3-Year Limited Warranty
egister your windshield on Line at: www.ZTechnik.com
ZTechnik hereby warrants to the original registered owner of a ZTechnik polycarbonate windshield for a period of
three years from the date of purchase against breakage. This limited warranty is expressly limited to the replacement
of the polycarbonate windscreen. This limited warranty does not include scratches, coating failure, cosmetic wear and tear,
replacement of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replace-
ment, inconvenience, inbound freight expenses or damage to any other component of the motorcycle or any other accessories.
Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage and will not be covered
under this limited warranty. Please refer to the cleaning instructions supplied with all ZTechnik windshields.
Visit www.ZTechnik.com for further details are call or write ZTechnik / PO Box 158 / Maywood, IL 60153 / 708-3430400
MAINTENANCE
To clean the screen, wash with a clean soft cloth, plenty of
warm water and if necessary, a non-abrasive soap such as
dishwashing liquid. Flannel or soft chamois make good cleaning
cloths. Paint, glue residue or grease removal: Moisten cotton
with Naphtha or Turpentine followed by a wash as above.
National Cycle Shield Wash™ makes a good daily cleaner and
comes with a handy travel size bottle. N1401 Shield Wash is
safe for helmet visors.
Do not clean polycarbonate in hot sun or high temperatures. Do
not clean the screen with glass cleaners. Do not use rain pro-
tective products on the screen other than National Cycle brand
ain Zip® (Part No. N1410). Do not allow brake fluid, alcohol,
or strong solvents to contact the screen.