ZUUM IP9CP User manual

IP/ PoE Extender
User Manual
Model : IP9CP
PoE over Coaxial Extender

1
Introduction
IP9CP is a point-to-point PoE (Power over Ethernet) extender that can use single coaxial cable to extend
TCP/IP signal and huge amount of power for a remote PoE device, such as speed dome camera, Dante
PoE speaker, smart LED…etc., with no external power required. It’s a perfect solution for CCTV system,
large-scale audio environment, smart building, and factory.
Features
•Signal extension up to 800M over coaxial cable.
•Provides up to 90W power for remote PoE device.
•Power source from either a PoE switch or an external power adapter.
•Bandwidth up to 100Mbps.
•Supports Full duplex and half duplex mode and Auto MDI/MDI-X switching.
•Built-in 30kV ESD, 40A EFT, and 30A surge at RJ45 side.
Optional Model
TPN6-IP9P 19”1U Rack
•Organize up to 6 pieces of IP9CPT/CPR and cables.
•Compliant with 1U standard (1.75”or 44mm).
•19”length and 1.75”height (482.6mm x 44mm).
Installation view
Power from a PoE Switch
Power from a Power Adapter

2
Panel Review
No.
Interface
Function
1
Power Jack
To connect with a DC48 ~ 56V adapter
2
Power LED Indication
To indicate the power status (Refer to Description 1)
3
Status Indication
□
1Status : Port 1 mode indication (Refer to Description 3)
4
Status Indication
□
2Status : Port 2 mode indication (Refer to Description 3)
5
Jumper
Reserved
6
DIP Switch
To select the desired mode (Refer to Description 5)
7
RJ45 Connector
Port 1；To connect with networking devices or IP09
(Refer to Description 4)
8
PoE LED Indication
To indicate the PoE connection status (Refer to Description 2)
9
BNC Connector
Port 2；To connect with IP09CPT/ IP09CPR
LED Indication
LED
LED Color
Description
Power
Green ON/ OFF
Power On/ Off
Breathing
Power Saving
PoE
BLUE ON/ OFF
PoE On/ Off

3
Status Indication
Port □
1/□ 2Mode Status:
LED Color
Description
Blue On
Long Distance
Blue Off
Unlinked/ Ethernet
Blinking
100Base-T1
RJ45 Pinout
※10BASE-T, 100BASE-TX and long distance 100Mbps mode use two pairs of wires to transfer data.
※100BASE-T1, long distance 10Mbps mode use one pair of wires to transfer data.
※Power is transferred through four pairs of wire.
DIP Switch Setting
•Auto Mode/ Default: Enable Auto-Negotiation which automatically sets up the link speed and
transmssion protocol.
•Auto+EEE Mode: Energy-Efficient Ethernet based on Auto Mode.
PIN
Data
PoE
1. Orange-white
TX+ (DATA1+)
PoE+ (Data Pair)
2. Orange
TX- (DATA1-)
PoE+ (Data Pair)
3. Green-white
RX+ (DATA2+)
PoE- (Data Pair)
4. Blue
PoE+ (Spare Pair)
5. Blue-white
PoE+ (Spare Pair)
6. Green
RX- (DATA2-)
PoE- (Data Pair)
7. Brown-white
PoE- (Spare Pair)
8. Brown
PoE- (Spare Pair)
SWITCH
SETTINGS/ FUNCTION
SW1
Auto Mode
(Default)
OFF↑
Auto Mode
with EEE
ON↓
100Mbps
ON↓
10Mbps
OFF↑
SW2
OFF↑
OFF↑
ON↓
ON↓
SW3
OFF↑
OFF↑
ON↓
ON↓
SW4
OFF↑
OFF↑
ON↓
ON↓

4
Advanced Mode
Please refer to the chart below to manually set up the Link Speed, and Modes
Auto-Negotiation Priority
Priority
Mode
1
(Highest)
Long Distance 100Mbps
2
100BASE-T1
3
Long Distance 10Mbps
4
100BASE-TX Full Duplex
5
100BASE-TX Half Duplex
6
10BASE-T Full Duplex
7
(Lowest)
10BASE-T Half Duplex
Power and Transmission Distance
The reports below show the extension distance and the amount of power transferred by distance.
All statistics are from the result of using 24AWG CAT5e, 75ΩRG59/RG6U coaxial cables to test.
•Transmission distance & data rate by different modes
•Transmission distance by different BNC connectors & data rate
Cable
Data Rate
Distance
RG59 (75-3)
100Mbps
500M
RG6U (75-5)
100Mbps
500M
RG59 (75-3)
10Mbps
800M
RG6U (75-5)
10Mbps
800M
NO
Function
↑OFF
↓ON
1
Link Speed
10Mbps
100Mbps
2
Ethernet
Disable
Enable
3
100BASE-T1
Disable
Enable
4
Long Distance
Disable
Enable
Mode
Data Rate
Distance
100BASE-TX with EEE
100Mbps
100M
100BASE-TX
100Mbps
130M
100BASE-T1
100Mbps
300M
Long Distance
100Mbps
500M
10BASE-T with EEE
10Mbps
100M
10BASE-T
10Mbps
250M
Long Distance
10Mbps
800M

5
Applying RG6U coaxial cable and power from 56V Power Adapter
Input Power
Distance
Output Power
110W (56V/1.96A)
100M
60W
100W (56V/1.79A)
200M
57W
86W (56V/1.54A)
300M
41W
88W (56V/1.59A)
400M
40W
61W (56V/1.09A)
500M
28W
47W (56V/0.84A)
600M
22W
39W (56V/0.69A)
700M
17W
37W (56V/0.67A)
800M
15W
27W (56V/0.48A)
900M
11W
25W (56V/0.45A)
1000M
10W
Applying RG6U coaxial cable and power from 48V Power Adapter
Input Power
Distance
Output Power
96W (48V/2.00A)
100M
50W
95W (48V/1.98A)
200M
47W
77W (48V/1.60A)
300M
30W
72W (48V/1.50A)
400M
28W
43W (48V/0.91A)
500M
19W
37W (48V/0.78A)
600M
15W
31W (48V/0.66A)
700M
11W
25W (48V/0.53A)
800M
9W
22W (48V/0.46A)
800M
7W
24W (48V/0.49A)
1000M
6W
Applying RG59 coaxial cable and power from 56V Power Adapter
Input Power
Distance
Output Power
96W (56V/2.00A)
100M
57W
74W (56V/1.33A)
200M
34W
50W (56V/0.9A)
300M
24W
39W (56V/0.7A)
400M
17W
31.8W (56V/0.57A)
500M
14W
25W (56V/0.45A)
600M
10W
24.6W (56V/0.44A)
700M
9W
18W (56V/0.34A)
800M
7W

6
Applying RG59 coaxial cable and power from 48V Power Adapter
Input Power
Distance
Output Power
96W (48V/2.00A)
100M
49W
65W (48V/x1.37A)
200M
23W
39W (48V/0.81A)
300M
16W
28W (48V/0.58A)
400M
10W
21W (48V/0.44A)
500M
8W
16W (48V/0.33A)
600M
6W
14W (48V/0.29A)
700M
4W
12W (48V/0.26A)
800M
3W
Applying RG6U coaxial cable and power from 802.3at PoE Switch (Zyxel GS1900-8HP)
Input Power
Distance
Output Power
802.3at
PoE Switch
100M
20W
200M
20W
300M
19W
400M
17W
500M
16W
600M
15W
700M
14W
800M
12W
900M
9W
1000M
8W
Applying RG59 coaxial cable and power from 802.3at PoE Switch (Zyxel GS1900-8HP)
Input Power
Distance
Output Power
802.3at
PoE Switch
100M
19W
200M
17W
300M
15W
400M
13W
500M
10W
600M
8W
700M
7W
800M
4W
Caution
•Ensure to connect all cables before power on to prevent voltage spikes.
Package Includes
No.
Item
Quantity
1
IP09CPT
x 1
2
IP09CPR
x 1
3
Screw
x 4
4
Screw Plug
x 4

7
Specification
ITEM
IP9CPR
IP9CPT
Support
Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3bw 100BASE-T1 Ethernet
IEEE 802.3 N-Way Auto-Negotiation
IEEE 802.3x Full Duplex Operation and Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Network Bandwidth
10/ 100 Mbps
Max. Transmission Distance
10Mbps at 800M, 100Mbps at 500M
Ports & Interfaces
Data Input
1 x 75ΩBNC
1 x RJ45
Data Output
1 x RJ45
1 x 75ΩBNC
Power Interface
1 x (5.5 x 2.1mm) DC Jack
1 x (5.5 x 2.1mm) DC Jack
Power
Power Supply
48 ~ 56V Regulated
12 ~ 56V Regulated
Power Consumption
1W
1W
Ambient Temperature
Operation
0 to 85℃
Storage
-20 to 85℃
Humidity
95%
Physical Characteristics
Dimensions
67 x 135 x 27mm
67 x 135 x 27mm
Weight
205g
215g
ZM11112022 Design and specifications are subject to change without notice