ZyXEL Communications EX3510-B1 User manual

Package Contents
Hardware Installation
1. Use the included blue cable to connect the blue Ethernet port in the front bedroom to the EX3510-B1’s
blue WAN port as illustrated.
2. Connect the power adapter to the EX3510-B1 and wait for two minutes. Check the EX3510 front panel.
ZYXEL EX3510-B1 Ethernet Gateway Installation Guide

3. The Power LEDs will light up green as below when the setup is complete. Note: If the lights do not turn on
green, please retry or contact your service provider for assistance.
WiFi Connection
Using the SSID method to connect WiFi
On your wireless device, find this SSID and enter the Wi Fi Password on your wireless clients and you can surf
the internet.
If you experience any issues getting connected, please reach out to
Bloom Support at [phone].

App Management
1. After successfully surfing the internet, please download the MPro Mesh app to your wireless device to manage
your MPro Mesh.
2. Open this app and enter the EX3510-B1’s seriel number. The seriel number is on the bottom label as below.
3. Use this app to enjoy the following features:
Remote Management
Internet Instant Block
View Home Devices
Guest Wi-Fi
Push Notification Manage
Home Wi-Fi Name
For questions or support, please reach out to Bloom Support at
[phone].