ZyXEL Communications EX5510-B0 User manual

Tapping Screw
M4x30 mm
Screw Anchors
x2 x2
Mounting Kit
Quick Start Guide
Step 1 Hardware Installation
1/2 65-020-551001B
Step 2 WiFi / WiFi6 Connection - A or B
EX5510-B0
Dual-Band Wireless AX Gigabit Ethernet Gateway
Use the Ethernet cable to connect the WAN port to an xDSL/Cable/Fiber modem with
Internet access.
Connect a computer to the LAN port using an Ethernet cable (optional).
Connect the power adapter.
1
2
1
2
3
EN
EN
1
2
SSID
Password
XXXXXXXXXX
ZyxelXXXXX
WiFi Network Name (SSID):
WiFi Password :
ZyxelXXXXX
XXXXXXXXXX
OR WiFi Password
XXXXXXXXXX
ZyxelXXXXX
WiFi
LAN1RESET LAN2 LAN3 LAN 4 2.5GWAN USB POWER
LAN 1RESET LAN 2 LAN 3 LAN 4 2.5G WAN USB POWER
WiFi6
xDSL/Cable/
Fiber modem
Internet
WAN
2
(Optional)
ETHERNET
OR
3POWER
1
POWER
Green On - Power is on.
INTERNET
Blinking - Starting up.
Red On - System failure.
Blinking - Upgrading firmware.
Green On - Internet is ready.
Blinking - Transmitting/receiving Internet data.
Red On - Attempted to get an IP address, but failed.
Go to the Quick Start Wizard.
A: Using SSID
Package Contents
Power
Adapter
Ethernet
Cable
EX5510-B0 Quick Start
Guide
Mounting
Base

2/2
EN
1
2
within
minutes
2
More than 1 second
WiFi
Zyxel Device
Connect
WPS
ON
WiFi
WPS
setup
Android Only
OR
12
B: Using WPS
11
2
3
Back Next Close
Welcome to the Quick Start wizard
Time Zone
Quick Start Wizard (Optional)
Wall Mounting (Optional)
EN
EN
Default IP Address :
Administrator Username :
Administrator Password :
192.168.1.1
admin
XXXXXXXXXX
Device
Username
Password XXXXXXXXXX
admin
Login
Username : admin
Password : Refer to the device label
(default)
http://192.168.1.1
3
2
x2
x2
29.0~31.0
4.0~4.15
1.85~2.15
7.4~8.0
Unit: mm
Unit: mm
28.0~34.0
5.0~7.0
Tapping Screw M4x30 mm
Blinking - Transmitting/receiving data.
Green On - 2.4G WiFi is ready.
Blinking - Transmitting/receiving data.
Green On - 5G WiFi is ready.
2.4G
5G
Green Blinking - WiFi connection using WPS in progress.
WPS
73.3mm
* Do not wall mount this device
over the height of 2 m.