2K Furniture Designs B7003-Q User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on protected
surfaces during assembly to prevent any damage.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
ASSEMBLY INSTRUCTIONS
PAGE 1 OF 3
MODEL #B7003-Q QUEEN SIZE BED

PAGE 2 OF 3
ASSEMBLY INSTRUCTIONS ITEM # B7003 BED
A- Headboard 1 pc
B- Headboard Leg 1 left & 1 right
C- Footboard 1 pc
HARDWARE IDENTIFICATION
1- JCBC Bolt m6 x 50mm 8 pcs
3- Flat Washer 8 pcs
4- Allen Key M4 1 pc
5- JCBC Bolt m6 x 25mm
NOTE: Quantities shown are for one unit of bed. . Bolts are metric screw threads
8 pcs
D- Bed Rails 2 pcs
E- Wooden Slats 4 pcs
F- Slat Support Leg 4 pcs
Ø 6mm
2”
Ø 15mm
Ø 18mm
2- Lock Washer 8 pcs
Ø 6mm
1”
8- Wooden Dowel
8 pcs
9- CSK Screw 8 pcs
1 1/8”
1 1/8”
Ø 8mm
BOX of B7003-QH
BOX of
B7003-QF
BOX of B7003-QR
PARTS OF THIS BED ARE PACKED IN 3 BOXES
BOX of B7003-QH
10- Allen Key M4 1 pc
BOX of B7003-QR
Ø 15mm
6- Lock Washer 8 pcs
7- Flat Washer 8 pcs
Ø 18mm

PAGE 3 OF 3
ASSEMBLY INSTRUCTIONS ITEM # B7003 BED
STEP 1 A
BLeft
BRight
123
4
D
C
A
E
9
EF
F
Height adjustable
glide
STEP 3
E
STEP 2
10
5
8
67