3M ESPE F2000 Instruction Manual

CLICKER DISPENSER OPERATION
3M™ESPE™F2000 Compomer Primer/Adhesive
in the 3M™ESPE™Clicker Dispenser
3
4
5
1 of 2
1
2
Precautions:
• Do not depress the dispenser lever
during cap removal and/or replacement.
• Do not advance the dispenser plunger
during cap removal and/or replacement.
Operation:
• Remove cap.
• Press and hold cap lever to unlock cap.
• Slide cap off dispenser.
Dispense:
• Touch cartridge tips to bottom of well.
Contact of the tips with the well
bottom is critical to assure proper
dispensing.

CLICKER DISPENSER OPERATION
2 of 2
3M ESPE Customer Hotline [phone]
Please refer to instructions for more detailed information 44-0019-9167-6
as well as precautionary and warranty information. © 2003 3M
6
7
8
• Fully depress lever to dispense material
from each side of cartridge into well.
• Release lever.
• Remove dispenser from well.
Clean:
• Wipe the cartridge tips with an alcohol-
dampened gauze.
Replace Cap:
• Hold the sides of the cartridge and slide
cap into place until securely latched as
indicated by an audible click.
F2000 Compomer Primer/Adhesive in the
3M™ESPE™Clicker™Dispenser