Aaeon PCM-6892 Rev.B User manual

Compact Board PCM-6892 Rev.B
PCM-6892 Rev.B
Intel®ULV Celeron®
400 / 650 MHz Processor
Compact Board
With LCD, Ethernet, TV-Out,
Mini PCI, Speaker out
PCM-6892 Rev. B Manual 3rd Ed.
Jan. 2005

Compact Board PCM-6892 Rev.B
i
Copyright Notice
This document is copyrighted, 2005. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its use.
The material inthis document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in this
document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

Compact Board PCM-6892 Rev.B
ii
Acknowledgments
All other product s’name or trademarks are properties of their respective
owners.
lAward is a trademark of Award Software International, Inc.
lCompactFlash™is a trademark of the Compact Flash Association.
lIntel®,Pentium®and Celeron®are trademarks of Intel®Corporation.
lMicrosoft Windows®is a registered trademark of Microsoft Corp.
lITE is a trademark of Integrated Technology Express, Inc.
lIBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
lSoundBlaster is a trademark of Creative Labs, Inc.

Compact Board PCM-6892 Rev.B
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
•1 PCM-6892 Rev.B CPU Card
•1 Jumper cap
•1 Quick Installation Guide
•1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please contact your
distributor or sales representative immediately.

Compact Board PCM-6892 Rev.B
iv
Contents
Chapter 1 General Information
1.1Introduction ..................................................................................1-2
1.2Features .........................................................................................1-4
1.3Specifications ................................................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precautions ........................................................................2-2
2.2 Location of Connectors and Jumpers ........................................2-3
2.3 Mechanical Drawing.....................................................................2-5
2.4 List of Jumpers .............................................................................2-7
2.5 List of Connectors ........................................................................2-8
2.6 Setting Jumpers.............................................................................2-10
2.7 Audio Out Selection (JP1) ...........................................................2-11
2.8 LCD Voltage Selection (JP2) ......................................................2-11
2.9 TTL_LCD Clock Selection (JP3)...............................................2-11
2.10 Clear CMOS (JP4) ......................................................................2-12
2.11 COM2 Ring / +5V / +12V Selection (JP5) ...........................2-12
2.12 TV-Out Connector (CN1) ........................................................2-12
2.13 TTL_LCD Connector (CN2) ...................................................2-13
2.14 VGA Display Connector (CN4) ...............................................2-14
2.15 ATX Power Connector (CN5) .................................................2-14
2.16 TTL_LCD Connector(CN6) ...................................................2-15
2.17 LVDS Connector (CN7) ...........................................................2-16

Compact Board PCM-6892 Rev.B
v
2.18 LAN1 LED Connector(CN8) .................................................2-16
2.19 LAN2 LED Connector (CN9) .................................................2-17
2.20 Audio Connector (CN10)..........................................................2-17
2.21 COM1~4 Connector (CN11) ...................................................2-18
2.22 USB Connector (CN12) ............................................................2-19
2.23 IrDA Connector (CN14) ...........................................................2-19
2.24 Fan Connector (CN15)..............................................................2-20
2.25 PS/2 Keyboard & Mouse Connector (CN16) ........................2-20
2.26 Front Panel Connector(CN17) ................................................2-20
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ....................................................3-2
3.2 Award BIOS Setup.......................................................................3-3
3.3 Standard CMOS Features ............................................................3-6
3.4 Advanced BIOS Features ............................................................3-7
3.5 Advanced Chipset Features .........................................................3-8
3.6 Integrated Peripherals ..................................................................3-9
3.7 Power management Setup...........................................................3-11
3.8 PnP/PCI configuration ...............................................................3-12
3.9 PC Health Status...........................................................................3-13
3.10 Frequency / Voltage control.....................................................3-14
3.11 Load Fail-Safe Defaults .............................................................3-15
3.12 Load Optimized Defaults..........................................................3-16
3.13 Set Supervisor / User Password ...............................................3-17
3.14 Save & Exit Setup.......................................................................3-18
3.15 Exit without saving ....................................................................3-19

Compact Board PCM-6892 Rev.B
vi
Chapter 4 Driver Installation
4.1 Step 1 –Install VIA 4 in 1 Driver ..............................................4-3
4.2 Step 2 –Install Graphic Driver...................................................4-3
4.3 Step 3 –Install Audio Driver ......................................................4-3
4.4 Step 4 –Install Ethernet Driver .................................................4-4
4.5 Step 5 –Install PCMCIA Driver (Win 98 only) ........................4-4
Appendix A I/O Information
A.1 I/O Address Map ................................................................... A-2
A.2 1st MB Memory Address Map ............................................... A-2
A.3 IRQ Mapping Chart ............................................................... A-3
A.4 DMA Channel Assignments ................................................. A-3
Appendix B Programming The Watchdog Timer
B.1 Programming the Watchdog Timer .......................................B-2

Compact Board PCM-6892 Rev.B
Chapter 1 General Information 1-1
General
Information
Chapter
1

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
2
1.1 Introduction
PCM-6892 Rev. B is the extension of PCM-6892 Rev. A. This model
possess all features in Rev. A but the only difference Intel®Ultra Low
Voltage Celeron®400/650MHz processor was introduced into Rev. B. With
the processor, PCM-6892 Rev. B will own more excellent performance and
lower power consumption than PCM-6892 Rev. A.
More options for your extension
Compared with PCM-6892 Rev. A, the new PCM-6892 Rev. B owns Mini
PCI slot. Mini PCI has the excellent ability for extension in your application.
Therefore, Mini PCI can go with the extension devices such as Gigabit LAN,
USB 2.0 or IEEE 1394 to pander the diverse applications.
Marvelous Graphic Accelerator
VIA VT8606 built in 2D / 3D Graphic Accelerator can offer the
high-resolution display quality and support 18/36 bit TTL or LVDS LCD
Display, TV out. VIA VT8606 is a superior chipset with all kinds of
integrations. Besides, the model is also integrated few functions such as Dual
Ethernet, Audio, USB, Serial port, Parallel port and etc. Mentioned above is
sufficient for your application. With 2 slots PCMCIA and Mini PCI plug,
you can make a choice depend on your application and need.
High performance and Low power consumption
Overall, PCM-6892 Rev. B provides an operating environment with low
power consumption and multi-functions. The compact size and flexible

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
3
expand interface will be the best choice for the embedded application which
has the severe condition for the space and environment.

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
4
1.2Features
•Intel®Ultra Low Voltage Celeron 400 / 650 CPU onboard
•Support 18 / 36 bit TTL/LVDS TFT Panel
•Mini PCI Slot
•Support Type II PCMCIA Slot (Optional)
•4 COMs / 4USB / CFD

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
5
1.3 Specifications
System
lCPU: Onboard Intel®Ultra Low Voltage
Celeron®400 /650MHz Processor
lMemory:Onboard one 168-pin DIMM socket
support up to 512MB SDRAM
lChipset: VIA VT8606 / VT82C686B
lBIOS: Award 256KB Flash BIOS
lEnhanced IDE: Supports up to two IDE devices.
Support Ultra DMA100 mode with
transfer rate up to 100MB / sec.
lFDD Interface: Support up to two floppy disk
drives, 5.25 inch (360KB and 1.2
MB) and/or 3.5 inch (720KB,
1.44MB and 2.88MB)
lParallel Port: One bi-directional parallel port.
Support SPP, ECP and EPP modes.
lSerial Port: Three RS-232 serial ports and one
RS-232 /422 / 485 serial ports.
Ports can be configured as COM1,
COM2, COM3, COM4 or disable
individually. (16C550 equivalent)
lIrDA port: Support one IrDA Tx /Rx header
lKB / Mouse connector:

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
6
A 7(4 x 2-1) pin header support
PC/AT keyboard and PS/2 mouse.
lUSB connector: Support four USB 1.1 ports
lBattery: Lithium battery for data retention
lWatchdog timer: Can generate a system reset.
lPower Management: Support ATX or AT power supply.
Support power saving standby
modes.
Display
Support CRT and LCD simultaneous/Independent display
lChipset VIA VT8606
lMemory size: Shared system memory up to 32 MB
lResolutions:Up to 1600 X 1200 @ 16bpp for
CRT
lDisplay Type: Support 18 / 36 bit TTL / dual
channel LVDS TFT LCD. Can
display CRT and flat panel
simultaneously.
lTV-Out Interface: VIA 1621 support NTSC / PAL
composite outputs
I/O
lMIO: IDE (UDMA33) x 1, FDD x 1, KB
+ Mouse x 1, RS-232 x 3,

Compact Board PCM-6892 Rev.B
Chapter 1 General Information
1
-
7
RS-232/422/485 x 1, Parallel x 1
lIrDA:One IrDA Tx/Rx header
lAudio:VIA VT82C686B with AC-97 2.0
compliant audio codec VT1612
lUSB: Two 5x2 pin headers support 4 USB
1.1 ports

Compact Board PCM-6892 Rev.B
Chapter 2 Quick InstallationGuide 2 -1
Quick
Installation
Guide
Chapter
2
Part No. 2007689221 Printed in Taiwan Sep.2004
Notice:
The Quick Installation Guide is derived
from
Chapter 2 of user manual. For other
chapters and
further installation
instructions
, please refer to the user
manual CD-ROM that ca
me with the
product.

Compact Board PCM-6892 Rev.B
Chapter 2 Quick Installation Guide
2
-
2
2.1 Safety Precautions
Always completely disconnect the power cord from
your board whenever you are working on it. Do not
make connections while the power is on, because a
sudden rush of power can damage sensitive
electronic components.
Always ground yourself to remove any static charge
before touching the board. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative
surface or in astatic-shielded bag when they are not
in the chassis

Compact Board PCM-6892 Rev.B
Chapter 2 Quick Installation Guide
2
-
3
2.2Location of Connectors and Jumpers
Component Side
Mini PCI

Compact Board PCM-6892 Rev.B
Chapter 2 Quick Installation Guide
2
-
4
Solder Side

Compact Board PCM-6892 Rev.B
Chapter 2 Quick Installation Guide
2
-
5
2.3 Mechanical Drawing
Component Side

Compact Board PCM-6892 Rev.B
Chapter 2 Quick Installation Guide
2
-
6
Solder Side