Aaeon PCM-9150 User manual

Compact Board PCM-9150
PCM-9150
Intel® Pentium®M / Celeron®M Processors
18/36-bit LVDS TFT Panel
Two DDRII 400/533 SoDIMM Memory
6.1 CH AC-97 2.0 Codec with S/P DIF
4 USB 2.0 / 4 COMs / Digital IO
PCM-9150 Manual Rev.A 1st Ed.
JUL. 2006

Compact Board PCM-9150
i
Copyright Notice
This document is copyrighted, 2006. All rights are reserved. The
original manufacturer reserves the right to make improvements
to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated,
or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information
provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility
for its use, or for any infringements upon the rights of third
parties that may result from its use.
The material in this document is for product information only
and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to
assure its accuracy, AAEON assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein.
AAEON reserves the right to make changes in the product
design without notice to its users.

Compact Board PCM-9150
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 Intel®, Pentium®M, and Celeron®M are trademarks of Intel®
Corporation.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.

Compact Board PCM-9150
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCM-9150 CPU Card
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
• 1 Jumper cap
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Compact Board PCM-9150
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-4
1.3 Specifications............................................................1-5
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-8
2.6 Setting Jumpers ........................................................2-10
2.7 Clear CMOS Selection (JP2) ....................................2-11
2.8 LVDS Panel Voltage Select (JP3).............................2-11
2.9 COM4 RI pin voltage select (JP4).............................2-11
2.10 COM3 RI pin voltage select (JP5)...........................2-11
2.11 ATX Power Connector (CN1)..................................2-12
2.12 Keyboard/Mouse Connector (CN2).........................2-12
2.13 LAN Pin Header (CN3), (CN4) (Optional)...............2-13
2.14 LAN LED Connector (CN5), (CN7) ......................... 2-13
2.15 CPU Fan Connector (CN6).....................................2-13
2.16 System Fan Connector (CN8).................................2-14
2.17 USB1/2 Connector (CN9)........................................ 2-14

Compact Board PCM-9150
v
2.18 USB3/4 Connector (CN10)...................................... 2-14
2.19 Parallel Port Connector (CN11) ..............................2-15
2.20 TV-Out Connector (CN12) ......................................2-15
2.21 COM 1~COM 4 Connector (CN13).........................2-16
2.22 IR Connector (CN14)...............................................2-17
2.23 DVI Connector (CN15)............................................2-17
2.24 CRT Connector (CN16)........................................... 2-18
2.25 Digital IO Connector (CN17)...................................2-18
2.26 5.1Channel Audio Connector (CN18) .....................2-19
2.27 2.1Channel Audio Connector (CN19) .....................2-19
2.28 LVDS Connector (CN20).........................................2-20
2.29 Front Panel (CN21)................................................. 2-21
2.30 DDR2 SO-DIMM Channel 1 Connector (DIMM1)...2-21
2.31 DDR2 SO-DIMM Channel 2 Connector (DIMM2)...2-21
2.32 LAN1 Connector (LAN1).........................................2-21
2.33 LAN2 Connector (LAN2) .......................................2-21
2.34 IDE Connector (IDE1) ...........................................2-22
2.35 S-ATA1 Connector (SATA1) .................................2-23
2.36 S-ATA2 Connector (SATA2) .................................2-23
2.37 Compact Flash Connector (CFD1) ........................2-23
2.38 PCI Slot Connector (PCI1) ....................................2-23
2.39 Mini PCI Connector (MPCI1) .................................2-23
2.40 PCI-Express Connector (PCI1) .............................2-23

Compact Board PCM-9150
vi
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A I/O Information
A.1 I/O Address Map....................................................A-2
A.2 Memory Address Map............................................A-3
A.3 IRQ Mapping Chart................................................A-4
A.4 DMA Channel Assignments...................................A-4
Appendix B Programming The Watchdog Timer
B.1 Programming .........................................................B-2
B.2 IT8712 Watchdog Timer Initial Program................B-6

Compact Board PCM-9150
Chapter 1 General Information 1- 1
General
Information
Chapter
1

Compact Board PCM-9150
Chapter 1 General Information 1- 2
1.1 Introduction
The PCM-9150 is AAEON’s latest low power consumption
solution featuring Intel® innovation. It adopts Intel’s®latest
Pentium®M chipset-Mobile Intel ®915GM Express Chipset,
which has been validated with Intel®Pentium®M CPUs and the
newest PCI-Express interface. Therefore the PCM-9150’s
peripheral transmission speed can upgrade effectively, especially
on multi-port Gigabit LAN applications. For these kinds of
applications, PCM-9150 has 2 Gigabit LAN ports onboard to
satisfy firewall and small data server demands.
The Greatest Performance on Multimedia applications
For multimedia applications, the Mobile Intel ®915GM Express
Chipset has Intel®Graphics media Accelerator (GMA900)
function built in the chipset. This feature will be of good use in
future KIOSK, advertisement, and information display
applications.
Versatile dual view combinations
Besides LCD support, PCM-9150 also allows customer to show
different content on CRT, LCD, DVI or TV (two of them) at the
same time. It meets dual view demands as the most
cost-effective display solution.

Compact Board PCM-9150
Chapter 1 General Information 1- 3
Widely Expanded Interfaces
PCM-9150 promises you off-the-shelf expansion possibilities with
versatile expansion interfaces-Mini PCI, PCI, and PCI-Express x1.
By adopting AAEON’s versatile Mini PCI modules, you can
extend your onboard features such as adding a third LAN port,
sixth or even eighth COM port, and one IEEE 1394a port.
Environment-Friendly applications
The RoHS compliant PCM-9150 is the ideal choice for high
performance and energy-saving demands that must be
implemented with low power consumption and pleasing
multimedia presentation. For environment-friendly applications,
the PCM-9150 no doubt is a perfect fit.

Compact Board PCM-9150
Chapter 1 General Information 1- 4
1.2 Features
 Supports Intel® Pentium M / Celeron®M Series Processors
 Supports 18/36-bit LVDS TFT Panel
 Supports Two DDRII 400/533 SoDIMM Memory Up to 2GB
 Dual PCI-Express Gigabit LAN
 6.1 CH AC-97 2.0 Codec With S/P DIF Function
 Supports Mini-PCI
 4 USB 2.0 / 4 COMs / Digital IO

Compact Board PCM-9150
Chapter 1 General Information 1- 5
1.3 Specifications
System
 CPU Up to Socket 478 Intel® Pentium®
M 2.13G (400/533MHz FSB) /
Celeron®M 1.5G (400MHz FSB)
 System Memory 2 x DDRII SoDIMM support DDRII
400/533 up to 2GB
 Chipset Intel® 915GM + ICH6M + ITE 8712
+ Fintek F81216D
 I/O Chipset Intel® ICH6M + ITE 8712 + Fintek
F81216D
 Ethernet Marvell 88E8053, 10/100/1000Mb
Chip, RJ-45 x 2
 BIOS Award Plug & Play BIOS – 512KB
ROM
 Watchdog Timer ITE 8712, generates a time-out
system reset
 H/W status monitoring ITE 8712, supports power supply
voltages and temperatures
monitoring functions
 SSD One Type II Compact Flash Card,
Genesys GL813 USB 2.0 interface
 Expansion Interface Mini-PCI socket x 1, PCI x 1,
PCI-Express by 1 x 1

Compact Board PCM-9150
Chapter 1 General Information 1- 6
 Battery Lithium battery
 Power Requirement +5V, +5VSB, +12V ATX, supports
ATX and AT type of power
 Board Size 8”(L) x5.75” (W)
(203mm x 146mm)
 Gross Weight 1.2lb (0.5kg)
Display
 Chipset Intel®915GM + Chrontel 7307C
 Memory Shared system memory up to
128MB with DVMT (128MB
support when the system
memory over 256MB)
 Resolutions Up to 1280x768@24bit for CRT
Up to 1280x768@36bit for LCD
Support: CRT/LCD, CRT/TV,
CRT/DVI, LCD/DVI, LCD/TV,
DVI/TV Dual View/Simultaneous
display under Windows
Operation System
 LCD Interface Up to 36bit dual channel LVDS
 TV-Out Supports NTSC/PAL; Supports
RCA and S-terminal connectors

Compact Board PCM-9150
Chapter 1 General Information 1- 7
I/O
 MIO EIDEx1(UDMA100 x 1), S-ATAx 2,
RS-232x3 (COM1/3/4),
RS-232/422/485x1 (COM2),
Keyboard + Mouse x1, Parallel x 1
 IrDA One IrDA Tx/Rx header
 Audio MIC-in/ Line-in/ Line-out/
CD-in, S/P DIF in/out, Stereo
Amplifier included
 USB Two 5x2 pin headers support 4
USB 2.0 Ports (One for Compact
Flash)
 Digital I/O 8 ports Digital I/O (Each port can
be programmed to be in or out)

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2 - 1
Chapter
2
Quick
Installation
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007915010 Printed in Taiwan, JUL. 2006

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2 - 2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2- 3
2.2 Location of Connectors and Jumpers
Component Side
CN1
IDE1
CN2
LAN2
LAN1
SATA2
SATA1
CN5
CN7
CN6
JP2
PCI1
PCIE1
CN19
CN18
CN13
CN10
CN9
JP5
JP4
CN12
CN17
CN16
CN20
JP3
CN15
CN21
CN14
DIMM1
JP6
CN8
MPCI1
CN11

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2 - 4
Solder Side
CFD1
DIMM2

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2- 5
2.3 Mechanical Drawing
Component Side
0.00
0.00
5.08
5.08
24.48
0.37
44.80
0.37
71.66
79.28
89.98
84.00
11.16
107.94
128.27
6.35
154.20
0.37
175.90
0.64
2.54
0.00
193.04
21.96
24.83
51.88
63.31
95.25
60.33
116.21
121.29
88.90
85.09
29.21
11.81
0.00
135.89
45.63
46.36
113.40
124.83136.53
62.23
136.56
60.73
53.75
118.11
135.89
193.04
140.97
198.12
146.92
122.16
72.16
96.92
152.40
53.18
101.60
33.18
44.37
91.25
81.37
67.50
40.64
119.38
40.64
5.08
36.20
40.51
22.86
130.95
1.26
125.25
133.16
161.75
9.63
49.53
86.56
28.58
11.46
1.27
17.50
17.00
14.50

Compact Board PCM-9150
Chapter 2 Quick Installation Guide 2 - 6
Solder Side
9.62
166.57
198.12
140.97 135.89
193.04
0.00
193.04
40.64
119.38
135.89
0.00
35.73
5.08
5.08
0.00
0.00
40.64
34.61
17.50
17.00
14.50