Aaeon COM-690T User manual

COM Express Module COM-690T/COM-690E
COM-690T/ COM-690E
AMD Turion/ Sempron
(S1 Socket) Processors
Up to 24-bit Dual-channel LVDS
Two DDRII 667/ 800 SODIMM
High Definition Audio
COM-690T/ COM-690E Manual Rev.A 2nd Ed.
November 2008

COM Express Module COM-690T/COM-690E
i
Copyright Notice
This document is copyrighted, 2008. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

COM Express Module COM-690T/COM-690E
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 AMD, the AMD Arrow logo and combinations thereof are
trademarks of Advanced Micro Devices, Inc.
 Microsoft Windows®is a registered trademark of Microsoft
Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.

COM Express Module COM-690T/COM-690E
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 COM-690T or COM-690E CPU module
• 1 CD-ROM for manual (in PDF format) and drivers
• 5 M2.5 x 4mm screws
If any of these items should be missing or damaged, please contact
your distributor or sales representative immediately.

COM Express Module COM-690T/COM-690E
iv
Application Notes
1. AT power input:
COM-690T/ COM-690E support AT and ATX power input.
However, COM-690T/ COM-690E only supports ACPI mode, but
not APM mode due to the chipset limitation. So, if you use the AT
power input, COM-690T/ COM-690E will run ACPI mode only.
(AAEON uses a H/W method to emulate AT power input as ATX
power input in Windows OS.)
2. DDRII SODIMM module:
AMD Turion and Sempron CPUs equip with the memory controller.
However, they may have the compatible issue with some DDRII
SODIMM modules.
AMD has provided the Available Vender List (AVL) of DDRII
SODIMM module and AAEON strongly suggests the customer to
choose the module from the AVL. For theAVL, please contact
AAEON's Application Engineering department for more details.

COM Express Module COM-690T/COM-690E
v
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors/Jumpers & Mechanical
Drawings .........................................................................2-3
2.3 List of Connectors .....................................................2-5
2.4 AT/ATX Selection (S1)..............................................2-5
2.5 COM Express A/B Port Connector (J1).....................2-6
2.6 COM Express C/D Port Connector (J4).................. 2-10
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 General Information...............................................A-2
A.2 Access Interface ....................................................A-2
A.3 Registers Description.............................................A-3

COM Express Module COM-690T/COM-690E
vi
A.4 F7511 Watchdog Timer Initial Program.................A-5
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-4
B.4 DMA Channel Assignments...................................B-4

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 1
General
Chapter
1
Information

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 2
1.1 Introduction
To accommodate fast growing marketing segments, AAEON
has developed a brand new COM (Computer-on-module)
Express CPU Module. The COM-690T/ COM-690E, and its
accompanying carrier board-ECB-916M, adopts AMD Turion/
Sempron (S1 socket) processor and AMD M690T/E + SB600
chipset, offering high speed PCI-Express bus interface and
serial ATA for your high performance applications requiring
high-speed and greater stability. The COM Express CPU
Module offers flexibility and time-to-market advantages over a
fully customized platform.
AAEON’s COM-690T/ COM-690E supports up to 24-bit
dual-channel LVDS interface and supports two DDRII 533/667
SODIMM memory modules up to 4GB. A high definition audio
interface is available to connect to an audio codec on the carrier
board. Moreover, one IDE and four SATA interfaces are
featured giving the user flexibility in storage choices.
To satisfy the requirements of leading-edge applications in
gaming, entertainment, industrial automation, medical, and POS,
etc, COM Express carrier boards can be designed with features
and technologies specifically targeting the needs of the different
market segments. AAEON can design your COM Express
carrier board to meet your specific project requirements.

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 3
1.2 Features
 COM Express Basic Module Pin-out Type II
 AMD Turion/ Sempron (S1 Socket) Processors
 AMD M690T/E + SB600 Chipset
 Non-ECC Dual-channel DDRII 667/800 Memory, Up To 4GB
 CRT/ Up to 24-bit Dual-channel LVDS LCD/ TV (COM-690T)
 Gigabit Ethernet
 High Definition Audio Interface
 Wide DC Input Range, +8.5V DC to +19V DC

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 4
1.3 Specifications
System
 CPU AMD Turion/ Sempron (S1 Socket)
Processors
 System Memory DDRII SODIMM x 2, supports
non-ECC DDRII 667/800 up to
4GB
 Chipset AMD M690T/E + SB600
 Ethernet Intel 82573L for Gigabit Ethernet
 BIOS Award PLCC Type BIOS—1MB
ROM
 H/W status monitoring CPU Temperature Monitoring
 Watchdog Timer Fintek F75111
 Wake on LAN Yes
 BBS (BIOS Boot Spec.) Yes
 Expansion Interface PCI-Express［x8］x 1 (Shared with
TMDS interface); PCI-Express
［x1］x 3 (One has been used by
the GbE on the module); 32-bit
PCI x 4; LPC bus x 1, SMBus x 1,
I2C x 1
 Power Requirement Wide DC input range, +8.5V DC to
+19V DC
 Board Size 4.92” (L) x 3.74” (W)

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 5
(125mm x 95mm)
 Gross Weight 0.66 lb (0.3kg)
 Operating Temperature 32oF~140oF(0oC~60oC)
 Storage Temperature -40oF~176oF(-40oC~80oC)
 Operating Humidity 0%~90% relative humidity,
non-condensing
 OS Windows 64-bit Vista/ Windows
32-bit XP Pro/ Windows 64-bit XP
Pro/ Windows XP Embedded/
WinCE 6.0/ Linux: 2.4 and 2.6
kernel
Display: Supports LCD/CRT, LCD/DVI, CRT/DVI (LCD/TV,
TV/DVI: COM-690T only) Simultaneous/ Dual View Displays
 Chipset AMD M690T/E integrated
 System Memory Shared system memory (no
limitation, depends on the
capacity of memory module)
 Side Port 16-bit interface x 1, support up
to 128MB DDRII 800 memory
 Resolution Up to 2560 x 1440 @ 75Hz for
CRT; Up to 2048 x 1536 (QXGA)
for LCD
 LCD Interface Up to 24-bit dual-channel LVDS
 TV-out AMD M690T integrated only,
supports NTSC/ PAL/ HDTV;

COM Express Module COM-690T/COM-690E
Chapter 1 General Information 1- 6
HDTV supports: 480i/ 480p/
576i/ 576p/ 720p/ 1080i;
Supports Composite Video,
S-Video and Component Video
(YPbPr) on carrier board
I/O
 I/O Chip SB600
 Storage IDE x 1, SATA x 4
 USB Port USB2.0 x 8
 Serial Port From LPC interface on carrier
Board
 Parallel Port From LPC interface on carrier
Board
 Keyboard and Mouse From LPC interface on carrier
board
 Audio High Definition Audio
 IrDA From LPC interface on carrier
board
 GPIO Up to 4 in or 4 out

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Chapter
2
Guide

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide 2 - 2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide
2 - 3
2.2 Location of Connectors/ Jumpers & Mechanical Drawings
Component Side
AMD
ATI

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide 2 - 4
Solder Side

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide
2 - 5
2.3 List of Connectors
There are a number of connectors in the board that allow you to
configure your system to suit your application. The table below
shows the function of each connector in the board:
Label Function
J1 DDR2 DIMM B Slot
J2 DDR2 DIMM A Slot
J3 COM Express A/B Port Connector
J4 COM Express C/D Port Connector
S1 AT/ATX option
2.4 AT/ATX Selection (S1)
Lable Function
1 (On), 2 (Off) ATX (Default)
1 (Off), 2 (On) AT

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide 2 - 6
2.5 COM Express A/B Port Connector (J3)
Row A Row B
A1 GND (FIXED) B1 GND (FIXED)
A2 GBE0_MDI3- B2 GBE0_ACT#
A3 GBE0_MDI3+ B3 LPC_FRAME#
A4 GBE0_LINK100# B4 LPC_AD0
A5 GBE0_LINK1000# B5 LPC_AD1
A6 GBE0_MDI2- B6 LPC_AD2
A7 GBE0_MDI2+ B7 LPC_AD3
A8 GBE0_LINK# B8 LPC_DRQ0#
A9 GBE0_MDI1- B9 LPC_DRQ1#
A10 GBE0_MDI1+ B10 LPC_CLK
A11 GND (FIXED) B11 GND (FIXED)
A12 GBE0_MDI0- B12 PWRBTN#
A13 GBE0_MDI0+ B13 SMB_CK
A14 GBE0_CTREF B14 SMB_DAT
A15 SUS_S3# B15 SMB_ALERT#
A16 SATA0_TX+ B16 SATA1_TX+
A17 SATA0_TX- B17 SATA1_TX-
A18 SUS_S4# B18 SUS_STAT#
A19 SATA0_RX+ B19 SATA1_RX+
A20 SATA0_RX- B20 SATA1_RX-
A21 GND (FIXED) B21 GND (FIXED)

COM Express Module COM-690T/COM-690E
Chapter 2 Quick Installation Guide
2 - 7
A22 SATA2_TX+ B22 SATA3_TX+
A23 SATA2_TX- B23 SATA3_TX-
A24 SUS_S5# B24 PWR_OK
A25 SATA2_RX+ B25 SATA3_RX+
A26 SATA2_RX- B26 SATA3_RX-
A27 BATLOW# B27 WDT
A28 ATA_ACT# B28 AC_SDIN2
A29 AC_SYNC B29 AC_SDIN1
A30 AC_RST# B30 AC_SDIN0
A31 GND (FIXED) B31 GND (FIXED)
A32 AC_BITCLK B32 SPKR
A33 AC_SDOUT B33 I2C_CK
A34 BIOS_DISABLE# B34 I2C_DAT
A35 THRMTRIP# B35 THRM#
A36 USB6- B36 USB7-
A37 USB6+ B37 USB7+
A38 USB_6_7_OC# B38 USB_4_5_OC#
A39 USB4- B39 USB5-
A40 USB4+ B40 USB5+
A41 GND (FIXED) B41 GND (FIXED)
A42 USB2- B42 USB3-
A43 USB2+ B43 USB3+
A44 USB_2_3_OC# B44 USB_0_1_OC#
A45 USB0- B45 USB1-