ABB Terra DC wallbox User manual

•Installation Manual
1-phase UL
•Installation Manual
3-phase UL
•CSAT Commissioning
Procedure
•User Manual
•Data Sheet
ABB E-mobility Inc.
United States
[e-mail]
We reserve the right to make technical changes or modify the contents of this document without prior
notice. We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents –in whole or in parts –
is forbidden without prior written consent of ABB. Copyright© 2023 ABB. All rights reserved.
INSTRUCTION
VIDEOS
TECHNICAL
DOCUMENTATION
—
Terra DC Wallbox UL
Quick Start Guide
•Installation video
1-phase UL
•Installation video
3-phase UL
•Commissioning video
NOTE: LOGIN REQUIRED TO
ACCESS TRAINING VIDEOS
RISE SERVICE PORTAL
9AKK108467A7496

—
Terra DC Wallbox
Quick Start Guide
MOUNT WALL
FRAME 02. INSERT UNIT TO WALL FRAME 03. TIGHTEN M5 BOLTS AS SHOWN 04. CONNECT THE FAN WIRES
01.
05. ATTACH
BOTTOM GRILL 06. 07. ATTACH FRONT COVER AND
SECURE WITH BOLTS
ATTACH LOWER
FRONT COVER
08. INSTALL POWER AND
FERRITES 09. CONNECT PE
10.VERIFY ALL POWER CONNECTIONS ARE
TORQUED TO SPECIFICATION 2.9NM
CONTINUE WITH COMMISSIONING
DOCUMENT
11.
We reserve the right to make technical changes or modify the contents of this document without prior
notice. We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents –in whole or in parts –
is forbidden without prior written consent of ABB. Copyright© 2023 ABB. All rights reserved.
TOOLS
•Screwdrivers
•Pliers
•Wire strippers
•Assorted wrenches
BEFORE INSTALLATION
•Mounting location is set
•Template for wall frame is in
installation manual chapter 10.1
•Electrical service is installed
•LOTO on all electrical circuits
NOTES
•Wall anchors are needed
to mount the Wall frame
•Load is 820N,
approximately 184lbs
per anchor
1-PHASE 3-PHASE
9AKK108467A7496