ABB 83320/2 U-500 User manual

0073-1-7519 │ │ 22.02.2012
ABB-Welcome
Pos: 2 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/D oorEntry/83320-2-U/ Titelbla tt - 83320-2-U - ABB @ 19\mod_1323166421969_1 5.docx @ 110941 @ @ 1
83320/2 U-500
83320/2 U
-515
Video indoor distributor
=== Ende der Liste für Textmarke Co ver ===

ABB
-Welcome
| 0073-1-7519
— 2 —
Pos: 4 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Inhal tsverzeichnis ( -->Für alle Dokument e <--)/Inhaltsverzeic hnis @ 19\mod_132064904438 6_15.docx @ 109653 @ @1
1Safety....................................................................................................................................................................... 3
2Intended use ............................................................................................................................................................ 3
3Environment............................................................................................................................................................. 3
3.1 ABB devices............................................................................................................................................ 3
4User Manual............................................................................................................................................................. 3
5Operation ................................................................................................................................................................. 4
5.1 Standard operation ................................................................................................................................. 4
5.2 Adjusting the device................................................................................................................................ 5
5.2.1Terminal resistor ..................................................................................................................................... 5
6Technical data.......................................................................................................................................................... 6
7Mounting / Installation .............................................................................................................................................. 7
7.1 Requirements for the electrician ............................................................................................................. 7
7.2 General installation instructions .............................................................................................................. 7
7.3 Mounting ................................................................................................................................................. 8
=== Ende der Liste für Textmarke TOC ===

ABB
-Welcome
Safety
| 0073-1-7519
— 3 —
Pos: 6 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Über schriften (--> Für alle Dokumen te< --)/1. Ebene/S - T/Sicher heit @ 18\mod_13026127917 90_15.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Si cherheit (--> Für alle Dokumen te< --)/Warnhinweise/Si cherheit - 230 V @ 18\mod_130260681 6750_15.docx @ 103308 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Work on the 230V supply system may only be performed by authorised electricians!
– Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Über schriften (--> Für alle Dokumen te< --)/1. Ebene/A - F/Bestimmun gsgemäßer Gebrauch @ 18\mod_130 2763321316_15.doc x @ 103483@ 1 @ 1
2 Intended use
Pos: 9 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/D oorEntry/83320-2-U/Bestimmungs gemaesser Gebrauch - 83320-2-U-500 @ 19\mod_13231663 40536_15.docx @ 110932 @ @1
The 83320/2 U-500 video distributor is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. Device 83320/2 U-500 must only be installed in suitable
ABB flush-mounted sockets.
Pos: 10 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Überschriften (--> Für alle Dokume nte <--)/1. Ebene/U - Z/ Umwel t @ 18\mod_130261 4158967_15.docx @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Umwelt (--> Für alle Dokumente <--) /Hi nwe is e/ Hin wei s - Umwelt - Hinweis Elektr ogeräte @ 18\mod_1302763 973434_15.doc x@ 103500 @ @1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic waste.
– The device contains valuable raw materials which can be recycled. Therefore, dispose of the
device at the appropriate collecting depot.
Pos: 12 /DinA4 - Anleitungen Online/ Ueberschriften/2. /ABB Geraete @ 19\mod_13231628 43832_15.docx @ 110875 @ 2 @ 1
3.1 AB B devices
Pos: 13 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Umwelt (--> Für alle Dokumente <--) /Hi nwe is e/ Hin wei s - Umwelt - ABB Elektroger äte @ 19\mod_1323162745839_ 15.docx @ 110867 @ @1
All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always
dispose of the packaging material and electric devices and their components via the authorized collecting depots
and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos: 14 /DinA4 - Anleitungen Online/ Ueberschriften/1. /Anwenderhandbuch @ 19\mod_ 1309347227593_15.doc x@ 107 473 @ 1@ 1
4 User Manual
Pos: 15 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEntr y/Systemhandbuch/ Anwenderhandbuch - ABB @ 19\mod_13231631 57997_15.docx @ 110883 @ @1
Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at
www.Busch-Jaeger.com.
Pos: 16 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @ 1

ABB
-Welcome
Operation
| 0073-1-7519
— 4 —
Pos: 17 /DinA4 - Anleitungen Online/ Ueberschriften/1. /Bedienung @ 18\mod_130261 3924165_15.docx @ 103365 @ 1 @ 1
5 Operation
Pos: 18 /DinA4 - Anleitungen Onli ne/Ueberschriften/2. /Normaler Betrieb @ 18\mod_1 302768820965_15.doc x@ 1035 40 @ 2 @ 1
5.1 S tandard operation
Pos: 19 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/DoorEn try/83320-2-U/Bedienung - 83320-2-U @ 18 \mod_1303278242828_15. docx @ 104016 @ @1
Fig. 1:
No.
Function
1
•Connection for the system controller
•When using several indoor stations: connection for the internal bus
2
Switch for the terminal resistor (see also chapter "Terminal resistor" on page 5)
The terminal resistor is switched on
The terminal resistor is switched off
3 / 4
Connections for the indoor stations
Pos: 20 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> F üralle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Operation
| 0073-1-7519
— 5 —
Pos: 21 /DinA4 - Anleitungen Onli ne/Ueberschriften/2. /Geraeteeinstellungen @ 18\mod_ 1302768847744_15.doc x @ 103548 @ 2@ 1
5.2 Adjus ting the devic e
Pos: 22 /DinA4 - Anleitungen Online/ Ueberschriften/3. /Abschlusswiders tand @ 19\mod_1321958079906_ 15.docx @ 110083 @ 3 @ 1
5.2.1 Terminal res is tor
Pos: 23 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEn try/Bedienung/Absc hlusswiderstand setz en 83320-2 U @ 19\mod_1311073 974809_15.doc x@ 10789 1@ @ 1
Fig. 2: Setting the terminal resistor on the device
•In pure audio installations always set the terminal resistor (1) on "OFF".
•In video installations or mixed audio and video installations set the terminal resistor for the the last devices of
a branch on "ON".
Pos: 24 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> F üralle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Technical data
| 0073-1-7519
— 6 —
Pos: 25 /DinA4 - Anleitungen Onli ne/Ueberschriften/1. /Technische Daten @ 18\mod_1302615 863001_15.docx @ 103416 @ 1 @ 1
6 Technical data
Pos: 26 /DinA4 - Anleitungen Onli ne/Inhalt/KNX/DoorEn try/83320-2-U/Technische Da ten - 83320-2-U @ 18\mod_13 03278243687_15.doc x@ 104 048 @ @ 1
Des igna
tion Value
Operating temperature (EN
50486)
-5° C to +45° C
Storage temperature
-20°C – +70°C
Protection
IP 20
Single-wire clamps
2 x 0.6 mm² – 2 x 1 mm²
Fine
-wire clamps 2 x 0.6 mm² – 2 x 0.75 mm²
Bus voltage
28 V- ±2 V
Pos: 27 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> F üralle Dok umente <--)/++++++++++++Seitenumbruch++++++++++++ @ 9\mod_1268898668093_ 0.docx @ 52149 @ @1

ABB
-Welcome
Mounting / Installation
| 0073-1-7519
— 7 —
Pos: 28 /Busch-Jaeger ( Neustruktur)/Modul-Struk tur/Online-Doku mentation/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/M - O/Montage / I nstallation @ 18\mod_13026139661 11_15.docx @ 103373 @ 1 @ 1
7 Mounting / Installation
Pos: 29 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Niederspannungs -und 230 V-Lei tungen @ 18\mod_130261782149 1_15.docx @ 103465 @ @1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.
Pos: 30 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Sic herheit (--> Für alle Dokument e <--)/Warnhinweise/Sic herheit - Fachkenntnisse @ 18\m od_1302774384017_15.d ocx @ 103564 @ 2 @ 1
7.1 R equirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
•Incorrect installation endangers your life and that of the user of the electrical system.
•Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
•Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
•Use suitable personal protective clothing.
•Use only suitable tools and measuring devices.
•Check the type supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos: 31 /DinA4 - Anleitungen Online/ Inhalt/KNX/DoorEntr y/Montage/Montagehi nweise - Allgemein @ 19\mod_131056 3670478_15.doc x@ 107743 @ 2 @ 1
7.2 General ins tallation instructions
•Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
•Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
•Do not install the wires of the system bus together with 230 V wires.
•Do not use common cables for the connecting wires of the door openers and wires of the system bus.
•Avoid bridges between different cable types.
•Use only two wires for the system bus in a four-core or multi-core cable.
•When looping, never install the incoming and outgoing bus inside the same cable.
•Never install the internal and external bus inside the same cable.
Pos: 32 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @ 1

ABB
-Welcome
Mounting / Installation
| 0073-1-7519
— 8 —
Pos: 33 /Busch-Jaeger ( Neustruktur)/Modul-Struktur/On line-Dokumentation/Übersc hriften (--> Für alle Dokumente < --)/2. Ebene/M - O/Montage @ 18\mod_13 02615960458_15.doc x@ 10342 4 @ 2 @ 1
7.3 Mounting
Pos: 34 /DinA4 - Anleitungen Online/ Inhalt - Montage/Montage - UP-Dosen - DI N 49073-1 oder geeignete s Aufputzgehaeuse @ 19\mod_1 313415304041_15.doc x@ 10871 3 @ @ 1
The device 83320/2 U-500 must only be installed in suitable FM boxes (DIN 49073-1), or a suitable surface-
mounted housing.
Pos: 35 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/Steuer module - Onli ne-Dokumentation (--> Für alle Dokument e <--)/++++++++++++Seitenumbruch++++++++++++@ 9\mod_1268898668093_ 0.docx @ 52149 @ @ 1
=== Ende der Liste für Textmarke Con tent ===

ABB
-Welcome
0073-1-7519 | | 22.02.2012
Pos: 37 /Busch-Jaeger ( Neustruktur)/Modul-Struktur /Online-Dokumentation/ Rückseiten (--> Für alle Dokumente <--) /Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327 320074886_15.doc x@ 137103 @ @ 1
A
member of the ABB Group
Busch
-Jaeger Elektro GmbH
PO box
58505 Lüdenscheid
Fr
eisenbergstraße 2
58513 Lüdenscheid
Germany
www.BUSCH
-JAEGER.com
[e-mail]
Central sales service:
Phone:
[phone]
Fax:
[phone]
Notice
We reserve the right to at all times make
technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time
of ordering apply to all orders. ABB accepts no
responsibility for possible errors or
incompleteness in this document.
We reserve all rights to this document
and the
topics and illustrations contained therein. The
document and its contents, or extracts thereof,
must not be reproduced, transmitted or reused by
third parties without prior written consent by ABB.
Copyright© 2012
Busch-Jaeger Elektro GmbH
All rig
hts reserved
=== Ende der Liste für Textmarke Bac kcover ===