ABB ABB-free@home TH-1.1 User manual

Welcome
to your new Thermostat
Finally... a wireless thermostat that is easy to
operate at home, at the ofce, from anywhere.
Activate
the fan
whenever
you like.
Utilize the
energy-saving
mode while
you are away.
Tap to
activate your
air-conditioning.
Tap to activate
your heater.
www.abb.com/freeathome

TEMP VALUES - The large number shows the current temp
and the small number the setpoint temp. Another option is
to display the outside temp.
ARROWS - Tap up or down to change the setpoint temp.
SETTINGS - Tap for settings mode, tap again to exit.
FAN - The fan can be set to ON or AUTO mode. By default,
it is in AUTO mode. Tap to turn on the fan.
HEATING - Tap to enable and disable the heating mode.
HEATING INDICATOR - When red the device is heating.
COOLING - Tap to enable and disable the cooling mode.
COOLING INDICATOR - When blue the device is cooling.
ECO - When operator is away, the device can be set to
save energy. The setpoint is decreased for heating or
increased for cooling. Tap to activate and deactivate
.
ON/OFF - Tap to turn the Thermostat OFF/ON, and to turn
OFF/ON all appliances that are connected to it. Only the
protection function remains active.
ACCESSORY- Activate/deactivate another function
(humidier or dehumidier).
AUXILIARY HEATING - This is used only if a heat pump is
controlled. If symbol is on, auxiliary heating is enabled
.
PROTECTION - Indicates heating/cooling was turned on
automatically to protect the HVAC from overload and the
home from extreme hot or cold temperatures.
SYMBOL DESCRIPTION
Function
Overview
Tap on a
symbol to
activate a
function.
It is 72°
and the
thermostat
is heating.
It is 72° and
cooling.
The fan is
manually on.
It is in energy-
saving ECO
mode.
It is 72°. Press
and hold the
big number
for 3 seconds.
You can now
clean the
screen.
For a complete system manual,
please go to
www.abb.com/freeathome
ABBPRN1050040 Rev. B1/ 05.09.2018