abi VESI 13543 User manual

VES I WALL MO UNTE D BAS IN 40 0 MM
Dis cla imer: P ro d u cts in th is ma n u a l mu s t by la w b e in s talled b y licen s ed a n d reg is tered tra d es p eo p le in a cco rda n ce w ith th e relev a n t s ta n d a rd s . A BI a n d th e man u f a ctu rer/dis trib u tor
res erve t h e rig h t to v a ry s p ecificatio n s o r d elete mo d els f ro m th eir ra n g e w ith o u t prio r n o tifica tio n . Dimen s io n s are n o min a l mea s u remen t s on ly. Th e in f o rma tio n lis ted is co rrect a t th e time
o f p u b lica tio n , h o w ever A BI a n d t h e man u f a ctu rer/d is trib u to r ta kes n o res p o n s ib ility f o r p rin tin g erro rs. C o p yrig h t © A BI I n terio rs 2 02 2 P ty Ltd
SPECIFICATIONS
RECOMMENDED USE Domestic
MATERIAL Solid Surface
INSTALLATION Wall Mount, recommended with Wall Mount Spout/Mixer
OVERFLOW No
CAPACITY 3L
RIM THICKNESS 15mm

DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material.
INSTALLATION GUIDE
This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
This product must be installed by a licensed tradesperson
This is a general installation guide - there are many factors that are
involved that can alter the installation method.
INSTALLATION GUIDE
2Fit waste and trap to basin.
1Check the desired height of basin from floor.
34
Hold basin against wall aligning outlet of
trap with waste pipe. Extend telescopic trap
up or down to find desired height & cut waste
to suit trap.
If correct height and position is suitable, level
the top of the basin & mark out desired position.
Drill holes through the back of basin into structure within
Fix basin into structural support in wall.
5Secure plumbing to basin and wall outlet.
Test by running water through the waste.
Place the cover plate over drain.
wall with a wood drill .
IN THE BOX
Silicon top and sides of
basin if necessary.
3 x Wall plug
3 x Hanger bolt
3 x Plastic washer
3 x Metal washer
3 x Nut
1 x Basin
level
structure in wall
structure in wall