Acer Liquid Z530 User manual

Z530
Service Guide Level1~2
1Version 1.0
SERVICE GUIDE
Z530

Z530
Service Guide Level1~2
2Version 1.0
System Spec
Features……………………………………………………………………………………………………..3
System Block Diagram……………………………………………………………………………………..4
Product 6six view …………………………………………………………………………………………...5
Software upgrading…………………………………………………………………………………………6
SD card upload SOP………………………………………………………………………………………..9
Acer 22 code define and SOP……………………………………………………………………………14
Device Disassembling and Assembling Procedure…………………………………………………….25
Disassembly procedure……………………………………………………………………………………25
Assembly procedure……………………………………………………………………………………….34
Requirement tools and screws……………………………………………………………………………42
Diagnostic SOP…………………………………………………………………………………………….43
Explode Diagram…………………………………………………………………………………………..58
Spare Part list………………………………………………………………………………………………59

Z530
Service Guide Level1~2
3Version 1.0
Features

Z530
Service Guide Level1~2
4Version 1.0
System Block Diagram

Z530
Service Guide Level1~2
5Version 1.0
Product six View

Z530
Service Guide Level1~2
6Version 1.0

Z530
Service Guide Level1~2
7Version 1.0
Software Upgrade SOP
1. Install USB Driver
1.1 Run “Install.bat” Which in Driver_Auto_Installer_V1.352.00
2. When you upgrade the FW, you can see the follow item if the driver is install ok

Z530
Service Guide Level1~2
8Version 1.0
3. Upgrade Phone SW
3.1 Open “Flash tool”
3.2 Load “Scatter File”, Tap scatter loading choose “MT6582…TXT” and loading

Z530
Service Guide Level1~2
9Version 1.0
3. Choose ”Firmware Upgrade” and then click the “Download”.
Note：step1~3，the device is Power off and not connect the computer
3.3 Download Finished when show this page

Z530
Service Guide Level1~2
10 Version 1.0
**If MB changed or repaired, please do CID Modification** after flash
image
If you don’t execute “CID modification”after flash, there might be
some APP or function not workable.
**CID Modification SOP**
1. Dial #2237243# (Its meaning is #CID#) to enter main menu.
2. Put the value of CID for the country region as the indicated location No.1.
3. Press the “Set”button as the indicated location No.2.
4. Select “Backup to NVRAM”as the indicated location No.3.