ACS ACR120 Manual

Wall Mounting Procedures
ACR120 Contactless Reader/Writer
Advanced Card Systems Ltd. Website: www.acs.com.hk
Email: [email protected]

ACR120 Contactless Reader/Writer
Special note to customers:
If you are looking for ACR120 readers for wall
mounting applications, please kindly notify the sales
representative in advance so that you will receive the
ACR120 readers with separate PVC stickers.
(You will receive the individual PVC stickers at the
same time so that after wall mounting, you can put it
back to protect the casing.)
Dimensions of suggested screws
(for wall-mounting)
1. Please make sure that no front sticker is attached
to the ACR120 reader front casing.
ACR120 Wall Mounting Procedures
Version 1.7 December 2007
Page 2of 4

ACR120 Contactless Reader/Writer
2. Remove the rubber feet at the back so that you
can drive in the screws.
3. Tighten the screws.
ACR120 Wall Mounting Procedures
Version 1.7 December 2007
Page 3of 4

ACR120 Contactless Reader/Writer
3. Tighten the screws (cont’d).
4. Wall mounting is completed. Place the PVC sticker
on the front casing to cover the screw holes.
ACR120 Wall Mounting Procedures
Version 1.7 December 2007
Page 4of 4