ACT ACTPRO 1000 User manual

ACTpro 1000 Card access door controller
Product Overview
The ACTpro 1000 is a single door controller
with the capacity for 10,000 users. The LCD
display and backlit keypad facilitate ease of
use for the installer and system administrator.
The ACTpro 1000 operates in Standalone
mode or may networked to a PC using the
ACTWin pro application.
Main Features
Single door controller
The ACTpro 1000 may be in turn networked
with other ACTpro 1000s to create a network of
up to 256 doors
RS485 interface to network controllers
10,000 users
16 user groups
16 time zones
Entry and exit reader support
500 event log
1000 user codes (Pin Only)
Installation / Specification Guidelines
The ACTpro 1000 requires a 12 volt dc supply
The controller may not be installed outdoors
unless it is in a sealed and heated cabinet
The ACTpro 1000 controller may be networked
via RS485 to expand the system up to 256
doors maximum
The maximum amount of ACTpro 1000s per
RS485 output is 32 (ACT supply a 4x485
or 1x485 interface for PC networks)
The ACTpro 1000 is compatible with ACTWin pro
and ACTWin pro Lite software packages
The ACTpro 1000 will operate standalone
or can be connected to a PC
For comparisons to our other controllers please
check the comparison chart on the back page
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
ACTpro 1000/2000/3000 Controllers and ACTpro 100
expander require a 12 volts DC supply
ACTpro 1000 System Schematic
ACTpro 1000
8 Core Screened
5 Amp
Lock Output
PSU
220/240 Volts AC
Tamper
3 Inputs (100mA)
3 Outputs (100mA)
EXIT
12/24 Volts DC

ACTpro 1000 Card access door controller
Product Specification
Operating Voltage: 12 Volts DC
Current Consumption: 40 - 150 mA
Weight: 750 grams
Operating Temperature: 0 to +50 C
Dimensions (HxWxD): 138 x 87 x 37 mm
Mounting: Surface or Flush
Card Readers Specifications
The ACTpro 1000 will work with the full range
of ACT card readers as well as most industry
standard readers with clock & data or wiegand
outputs.
Cabling Chart
From To Cable Restriction
Ordering Information
Reader
ACTpro
1000
ACTpro
1000
Network
RS485
interface
Controller
PC Direct
RS232
Network
RS485
interface
PC
8 core
screen
Twisted
screen
pair
or Cat 5
Twisted
screen
pair
or Cat 5
Cable
supplied
30m at 5volts
100m at
12volts
Maximum
30m
Maximum
1.4km
Maximum
30m
Access Control Technology Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland.
t: 353 (0) 1 466 2570. f: 353 (0) 1 452 0427. e: [email protected]. w: www.accesscontrol.ie
Controller
Single channel
RS485 interface
Four channel
interface
56k modem
ACTpro 1000
ACT Net IF-1
(requires 12v DC supply)
ACT Net IF-4
(Built in PSU)
ACT 56K modem
ACTpro products comparison chart
Feature
Doors
Users
User Groups
Time Zones
Event Log
Anti passback
Timed anti passback
Entry and exit reader support
Timed actions
Interlock
Intruder Alarm System Integration
User tracking
Clock & Data or Wiegand auto detect
Card only operation
Card or pin
Card and pin
Auxiliary door operation
Door monitoring
Door control
DDA extended timer facility
Backlight
Automatic daylight saving adjustment
Fire alarm override
Toggle mode
Door relay output
Auxiliary relay output
Programmable inputs
Programmable Outputs
Tamper & low voltage output
Network doors
Modem connection
Built in TCP/IP
TCP/IP compatible
Ethernet Network Interface
ACTpro 1000
1
10,000
16
16
500
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5 amp
2 (100 mA)
2 (100 mA)
Yes
256 max
Yes
Yes
ACTpro 2000
2
20,000
1000
128
5000
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5 amp
1 amp
2 (100 mA)
2 (100 mA)
Yes
2,000 max
Yes
Yes
ACTpro 3000
2
30,000
1000
256
5000
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5 amp
1 amp
2 (100 mA)
2 (100 mA)
Yes
2,000 max
Yes
Yes
Yes
10 Base-T
(RJ45)
ACTpro 1000
Controller
56k Modem 4 channel
RS485 Interface
Single channel
RS485 Interface