
Step 2: Connect to your Device
Get one MoCA 2.5 Extender.
Locate the device or access point (laptop, etc.) that
needs toconnect tothe Internet. Connect one Ethernet
Cable from the Extender to the Device.
Connect one Splitter to the Coax Cable coming from
the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the Coax
In porton the
Extender.
Connect one Power Adapter to the Extender and to a
Power Outlet.
Wait until the Power light on the front of the adapter
is GREEN.
IMPORTANT! If the Coax LED on the Extender
is already GREEN, you may have MoCA built in to your
modem/router. Check the device you just connected. If
it is connected to the Internet, you’re done*. If the device
does not connect to the Internet, continue to Step 2.
* You may use the 2nd adapter with another device or access point.
a
b
c
d
e
f
g
TV
ECB7250
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
a
ge
f
b
d
c
MoCA 2.5
Extender
Laptop or other
access point
Power
Outlet
Splitter
Coax LEDPower LED Power
Adapter
Ethernet Cable
Coax Outlet
ECB7250
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
TV Ethernet Port of
Modem / Router
Power
Outlet
MoCA Network
Adapter1
Power
Adapter
Coax LEDPower LED
Ethernet Cable
Splitter
Coax Outlet
Coaxial wiring behind the wall
b