ACU-RITE 00535 User manual

Digital Timer
#00535
Instruction Manual
INST - 00535 090909
1 • OVERVIEW OF FEATURES
Thank You for purchasing this ACURITE® product. Please read this manual in it’s
entirety to fully enjoy the benefits and features of this product. Please keep this
manual for future reference.
NOTE: A clear film is applied to the display at the factory that must be removed
prior to using this product. Locate the clear tab and simply peel to remove.
Hours
Indicator
Minutes
Indicator
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST)
www.AcuRite.com
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of
defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF THIS
WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use
and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by
Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned
goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than
a
uthorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS
ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM
ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS
ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE
OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES
ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS
AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN
WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Chaney Customer Care
877-221-1252
Mon-Fri 8:00 a.m. to 4:45 p.m. CST
www.chaneyinstrument.com
- 1 -
Seconds
Indicator
START/STOP
Button
Clear Button
Recall Button
If at any time in the future you need to dispose of this product please note that:
Wasteelectrical products should not be disposed together with household waste.
Pleaserecycle where facilities exist. Check with your local Authority or retailer
for recycling advice
•••
•••
•••

ACU ► RITE.
DESIGNED TO WORK FOR YOU"
General Timer Description:
This timer is a countdown/up timer. The max range is 9 hours, 59 minutes and
59 seconds. When the timer counts down to 0:00:00, the unit will start to alarm and
count up to show how much time elapsed since the timer started sounding. The
alarm will continuously sound at 75 db for 1 minute or until the user presses
the START/STOP button.
2 • INSTRUCTIONS FOR USE
1. The timer is “always on” after the battery has been installed.
2. In sleep mode, the LCD will display 00:00:00.
3. Enter the desired time using the number keys. The time will enter from right to
left on the display.
Example: To set timer to 1 hour, 25 minutes, 30 seconds, enter 12530
4. START/STOP: Pressing the “START/STOP” button without entering a time
causes the timer to start counting up. Pressing the “START/STOP” button
after entering a time will cause the timer to start counting down from
the time entered.
5. When the time reaches zero, the alarm will beep. The alarm will sound for
1 minute at 75dB. Press the “START/STOP” button to turn the alarm off.
6. CLEAR: Press the “CLEAR” button to clear the time displayed.
7. RECALL: Press the “RECALL” button to bring back the last time entered.
8. The timer can be set up to 9 hours, 59 minutes and 59 seconds.
When timer is set but NOT running:
1. Press the “START/STOP” button to begin counting down from the time entered.
2. Press the “CLEAR” button to reset the timer to zero
When the timer is running:
1. Press the “START/STOP” button to pause the countdown. Press again to resume
countdown.
General Timer Description: This is a countdown timer (this means that when
the timer reaches 00:00 it will sound an alarm). The alarm will sound for
1 minute at 75 db.
- 2 -
Battery Requirements:
1 Alkaline AAA battery. Battery not included.
Be sure to use good quality alkaline batteries. Generic brands and heavy duty
batteries contain another chemical called carbon-zinc which causes the battery to
provide its power at different rates than a plain alkaline battery. This may cause
problems in the unit and can potentially damage the unit.
3 • WARNING
WARNING: Do not place unit on hot surface, over or grill. Do not immerse unit
in water.
Product Registration
To receive product information, register
your product online. It’s quick and easy!
Log on to www.AcuRite.com
- 3 -