Adb L-810 sbol User manual

L-810 SBOL - Steady Burning Obstruction Light Single and Dual

User Manual

96A0006, Rev. N, 2018/11/01

A.0 Disclaimer / Standard Warranty

CE certification

The equipment listed as CE certified means that the product complies with the essential requirements concerning safety and

hygiene. The directives that have been taken into consideration in the design are available on written request to ADB

SAFEGATE.

ETL certification

The equipment listed as ETL certified means that the product complies with the essential requirements concerning safety and

FAA Airfield regulations. The directives that have been taken into consideration in the design are available on written request

to ADB SAFEGATE.

LED Product Guarantee

Where applicable, per FAA EB67(applicable edition), ADB SAFEGATE L858(L) Airfield Guidance Signs are warranted against

electrical defects in design or manufacture of the LED or LED specific circuitry for a period of 4 years. ADB SAFEGATE LED light

fixtures (with the exception of obstruction lighting) are warranted against mechanical and physical defects in design or

manufacture for a period of 12 months from date of installation; and are warranted against electrical defects in design or

manufacture of the LED or LED specific circuitry for a period of 4 years per FAA EB67 (applicable edition).

Note

See your sales order contract for a complete warranty description. In some specific cases, deviations are (to be)

accepted in the contract, which will supersede the standard warranty.

Standard Product Guarantee

Products of ADB SAFEGATE manufacture are guaranteed against mechanical, electrical, and physical defects (excluding lamps)

which may occur during proper and normal use for a period of one year from the date of installation or 2 years from date of

shipment and are guaranteed to be merchantable and fit for the ordinary purposes for which such products are made. ADB

SAFEGATE L858 Airfield Guidance Signs are warranted against mechanical and physical defects in design or manufacture for a

period of 2 years from date of installation per FAA AC 150/5345-44 (applicable edition).

Note

See your sales order contract for a complete warranty description.

All Products Guarantee

LED Products of ADB SAFEGATE, manufactured and sold by ADB SAFEGATE or its licensed representatives, meets the

corresponding requirements of FAA, ICAO and IEC.

ADB SAFEGATE will correct by repair or replacement per the applicable guarantee above, at its option, equipment or parts

which fail because of mechanical, electrical or physical defects, provided that the goods have been properly handled and

stored prior to installation, properly installed and properly operated after installation, and provided further that Buyer gives

ADB SAFEGATE written notice of such defects after delivery of the goods to Buyer. Refer to the Safety section for more

information on Material Handling Precautions and Storage precautions that must be followed.

ADB SAFEGATE reserves the right to examine goods upon which a claim is made. Said goods must be presented in the same

condition as when the defect therein was discovered. ADB SAFEGATE furthers reserves the right to require the return of such

goods to establish any claim.

ADB SAFEGATE’s obligation under this guarantee is limited to making repair or replacement within a reasonable time after

receipt of such written notice and does not include any other costs such as the cost of removal of defective part, installation

of repaired product, labor or consequential damages of any kind, the exclusive remedy being to require such new parts to be

furnished.

96A0006, Rev. N, 2018/11/01 iii

ADB SAFEGATE’s liability under no circumstances will exceed the contract price of goods claimed to be defective. Any returns

under this guarantee are to be on a transportation charges prepaid basis. For products not manufactured by, but sold by ADB

SAFEGATE, warranty is limited to that extended by the original manufacturer.

This is ADB SAFEGATE’s sole guarantee and warranty with respect to the goods; there are no express warranties or warranties

of fitness for any particular purpose or any implied warranties of fitness for any particular purpose or any implied warranties

other than those made expressly herein. All such warranties being expressly disclaimed.

Liability

WARNING

Use of the equipment in ways other than described in the catalogue leaflet and the manual may result in personal

injury, death, or property and equipment damage. Use this equipment only as described in the manual.

ADB SAFEGATE cannot be held responsible for injuries or damages resulting from non-standard, unintended uses of its

equipment. The equipment is designed and intended only for the purpose described in the manual. Uses not described in the

manual are considered unintended uses and may result in serious personal injury, death or property damage.

Unintended uses includes the following actions:

•Making changes to equipment that have not been recommended or described in this manual or using parts that are not

genuine ADB SAFEGATE replacement parts or accessories.

•Failing to make sure that auxiliary equipment complies with approval agency requirements, local codes, and all applicable

safety standards if not in contradiction with the general rules.

•Using materials or auxiliary equipment that are inappropriate or incompatible with your ADB SAFEGATE equipment.

•Allowing unskilled personnel to perform any task on or with the equipment.

This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, nor otherwise, without ADB SAFEGATE BVBA’s prior written consent.

This manual could contain technical inaccuracies or typographical errors. ADB SAFEGATE BVBA reserves the right to revise this

manual from time to time in the contents thereof without obligation of ADB SAFEGATE BVBA to notify any person of such

revision or change. Details and values given in this manual are average values and have been compiled with care. They are not

binding, however, and ADB SAFEGATE BVBA disclaims any liability for damages or detriments suffered as a result of reliance

on the information given herein or the use of products, processes or equipment to which this manual refers. No warranty is

made that the use of the information or of the products, processes or equipment to which this manual refers will not infringe

any third party’s patents or rights. The information given does not release the buyer from making their own experiments and

tests

L-810 SBOL - Steady Burning Obstruction Light Single and Dual

TABLE OF CONTENTS

1.0 Safety.........................................................................................................................................................................................1

1.1 Safety Messages.......................................................................................................................................................................................................... 1

1.1.1 Introduction to Safety...................................................................................................................................................................................2

1.1.2 Intended Use.................................................................................................................................................................................................... 2

1.1.3 Material Handling Precautions: Storage................................................................................................................................................ 3

1.1.4 Maintenance Safety....................................................................................................................................................................................... 3

1.1.5 Material Handling Precautions, ESD........................................................................................................................................................3

2.0 L-810 SBOL................................................................................................................................................................................5

2.1 Introduction...................................................................................................................................................................................................................5

2.1.1 How to work with the manual................................................................................................................................................................... 5

3.0 Introduction..............................................................................................................................................................................7

3.1 Incandescent Steady Burning Obstruction Light.............................................................................................................................................7

3.2 Options............................................................................................................................................................................................................................9

3.2.1 Lamp-Out Relay...............................................................................................................................................................................................9

3.2.2 Alarm Terminal.................................................................................................................................................................................................9

3.3 L-810 Obstruction Light: Required Equipment..............................................................................................................................................10

4.0 Specifications......................................................................................................................................................................... 11

4.1 Lamp-Out Relay Operation...................................................................................................................................................................................11

5.0 Installation..............................................................................................................................................................................13

5.1 Unpacking....................................................................................................................................................................................................................13

5.2 Installation................................................................................................................................................................................................................... 13

5.2.1 Placement........................................................................................................................................................................................................13

5.2.2 Single L-810 (6.6A or 120 Vac) Wiring Procedure............................................................................................................................14

5.3 Dual L-810 (6.6 A) Wiring Procedure (Without Lamp-Out Relay).......................................................................................................... 14

5.4 Dual L-810 (120 Vac) Wiring Procedure (Without Lamp-Out Relay).....................................................................................................15

5.5 Dual L-810 (120 Vac) Wiring Procedure (With Lamp-Out Relay)............................................................................................................15

6.0 Maintenance........................................................................................................................................................................... 17

7.0 Parts.........................................................................................................................................................................................19

7.1 Spare Components...................................................................................................................................................................................................19

7.2 L-810 Obstruction Light Parts List......................................................................................................................................................................20

7.2.1 Single L-810 Obstruction Light...............................................................................................................................................................20

7.2.2 Dual L-810 Obstruction Light (Without Lamp-Out Relay)............................................................................................................21

7.2.3 Dual L-810 Obstruction Light (With Lamp-out Relay)................................................................................................................... 22

7.2.4 Dual-with-Relay L-810 Wiring Schematic...........................................................................................................................................23

A.0 SUPPORT.... 25

A.1 ADB Safegate website.............................................................................................................................................................................................25

A.2 Recycling......................................................................................................................................................................................................................26

A.2.1 Local authority recycling...........................................................................................................................................................................26

A.2.2 ADB Safegate recycling............................................................................................................................................................................. 26

96A0006, Rev. N, 2018/11/01 v