Adexa JC-95E/HC User manual

U S E R ‘ S M A N A U L - E N
Contents
Compressor Wine Cooler
JC-95E/HC

Important Safety Instruction ————————————————————— 1
Remove transport packaging —————————————————————3
Installation —————————————————————————————3
Description of the appliance —————————————————————-4
Defrosting —————————————————————————————--7
Cleaning and Care ——————————————————————————7
Energy Saving Tips —————————————————————————-9
Trouble shooting —————————————————————————-- 9
Changing the LED light ———————————————————————11
Power Supply————————————————————————————-11
Technical specifications———————————————————————-12
Wine cooler Circuit Diagram—————————————————————-13

1
Important Safety Instructions
These warnings are provided in the interests of your safety. Ensure you fully understand them
before installing or using the appliance.
Your safety is paramount importance. If you are unsure about the meaning of these warnings,
please contact the Customer Care Department for assistance.
Intended use
·The wine cooler is intended for use at home. It is suitable for the storing of wine at low
temperature. If the appliance is used for purposes other than those intended or used
incorrectly, no liability can be accepted by the manufacturer for any damage that may be
caused.
·Alterations or changes to the wine cooler are not permitted for reasons of safety.
If you use the wine cooler in a commercial application or for purposes other than the cooling
of foods, the manufacturer accepts no liability for any damages which may occurs.
Prior to initial start-up
·Check the appliance for transport damage. Under no circumstance should a damaged
appliance be plugged in. In the event of damage, please contact your supplier.
Wine cooler
The wine cooler is butane (R600a) is contained within the wine cooler circuit of the appliance, a
natural gas with a high level of environmental compatibility, which is nevertheless flammable
·During transportation and installation of the appliance, be certain that none of the
components of the wine cooler circuit become damaged.
·If the wine cooler circuit should become damaged: avoid opening flames and sources of
ignition;

2
thoroughly ventilate the room in which the appliance is situated.
·It is intended to be used exclusively for the storage of wine.
·This refrigerating appliances is not intended to be used as a built -in appliance.
. This refrigerating appliance is not suitable for freezing foodstuffs.
·The Wine Cooler is recommended to be designed at 12°C.
·The shelves are placed in factory mode that results in the most efficient use of energy for the
refrigerating appliances.
·Note: Setting the temperature too high can cause the wine to spoil, and setting the
temperature too low can waste electricity.
Safety of children
·Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is a risk of
suffocation! Keep packaging material away from children!
·Make old appliances unusable prior to disposal. Pull out the main plug, cut off the mains cable,
break or remove spring or bolt catches, if fitted. By doing this you ensure that children
cannot lock themselves in the appliance when playing (there is risk of suffocation!) or get
themselves into other dangerous situations.
·Often children cannot recognize the hazards present in household appliances. It is therefore
important that you ensure adequate supervision and never let children play with the
appliance!
Daily Operation
·Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an
explosion! Do not store any containers with flammable materials such as spray cans, fire

3
extinguisher refill cartridges etc in the wine cooler.
·Do not operate any electrical appliances in the wine cooler (e.g. electric ice cream makers,
mixers etc.).
·Before cleaning the appliance, always switch off the appliance and unplug it, or pull the house
fuse or switch off the circuit breaker.
·When unplugging always pull the plug from the mains socket, do not pull on the cable.
In case of malfunction
If a malfunction occurs on the appliance, please look first in the “Trouble shooting” section of
these instructions. If the information given there does not help, please do not perform any
further repairs yourself.
·Under no circumstance should you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or serious malfunctioning. Contact your local
Service Force Centre.
Remove transport packaging
The appliance and the interior fittings are protected for transport. Pull off the adhesive
tape on the left and right side of the door. You can remove any remnants of adhesive using
white spirit. Remove all adhesive tape and packing pieces from the interior of the Appliance.
Installation
Installation Location
The appliance should be set up in a well-ventilated, dry room. Energy use and efficient