ADF Web HD67B81-IP-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 1 of 32
User Manual
Revision 1.
English
BACnet Slave / PROFINET Master -
Converter
(Order Code: HD67B81-IP-A1, HD67B81-MSTP-A1,
HD67B81-MSTP-B2)
for Website information:
www.adfweb.com/?Product=HD67B81
for Price information:
www.adfweb.com/?Price=HD67B81-IP-A1
www.adfweb.com/?Price=HD67B81-MSTP-A1
www.adfweb.com/?Price=HD67B81-MSTP-B2
Benefits and Main Features:
Triple electrical isolation
Power Supply 18…35V DC and 8…24 V AC
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For others PROFINET Master devices, see also the following links:
PROFINET Master from/to
www.adfweb.com?Product=HD67B45 (OPC UA Server)
www.adfweb.com?Product=HD67B7 (Serial)
www.adfweb.com?Product=HD67B71 (Modbus Slave)
www.adfweb.com?Product=HD67B72 (PROFIBUS Slave)
www.adfweb.com?Product=HD67B73 (CAN)
www.adfweb.com?Product=HD67B74 (CANopen)
www.adfweb.com?Product=HD67B75 (DeviceNet Slave)
www.adfweb.com?Product=HD67B76 (Modbus TCP Slave)
www.adfweb.com?Product=HD67B77 (SNMP Agent)
www.adfweb.com?Product=HD67B78 (EtherNet/IP Slave)
www.adfweb.com?Product=HD67B79 (KNX)
www.adfweb.com?Product=HD67B8 (MQTT)
www.adfweb.com?Product=HD67B82 (IEC 61850 Server)
www.adfweb.com?Product=HD67B84 (Ethernet)
Do you have an your customer protocol?
See the following links:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 2 of 32
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 8
CONFIGURATION 8
POWER SUPPLY 9
FUNCTION MODES 1
LEDS 11
ETHERNET 13
RS485 14
USE OF COMPOSITOR SW67B81 15
NEW PROJECT / OPEN PROJECT 16
SOFTWARE OPTIONS 17
SET COMMUNICATION 19
PROFINET ACCESS 21
SET BACNET ACCESS 24
BACNET EDE FILE 25
UPDATE DEVICE 26
MECHANICAL DIMENSIONS 28
ORDERING INFORMATIONS 3
ACCESSORIES 3
DISCLAIMER 31
OTHER REGULATIONS AND STANDARDS 31
WARRANTIES AND TECHNICAL SUPPORT 32
RETURN POLICY 32
Pagina 2 di 32
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
Revision Date Author Chapter Description
1. 13/ 3/2 19 Ff All First release version
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 3 of 32
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 4 of 32
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 5 of 32
Figure
1
a
: Connection scheme for HD67
B
8
1
-
I
-
A
1
CONNECTION SCHEME:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 6 of 32
Figure
1
b
: Connection scheme for HD67
B
8
1
-
MST
-
A
1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 7 of 32
Figure
1
c
: Connection scheme for HD67
B
8
1
-
MST
-
B
2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 8 of 32
CHARACTERISTICS:
The HD67B81-xxx-A1/B2 is a BACnet Slave / PROFINET Master converter.
It allows the following characteristics:
Triple isolation between RS485 - Power Supply, RS485 - Ethernet, Ethernet - Power Supply;
Up to 15 bytes in reading and 15 bytes in writing;
Two-directional information between PROFINET and BACnet;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CONFIGURATION:
You need Compositor SW67B81 software on your PC in order to perform the following:
Define the parameter of the BACnet;
Define the parameter of the PROFINET;
Define the list of PROFINET slaves connected to the converter;
Define the list of BACnet objects available for reading and writing;
Export the EDE file for BACnet;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 9 of 32
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
HD67B81-xxx-A1/B2 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67B81-xxx-A1/B2 4
Caution: Not reverse the polarity power
HD67
B
81
-
IP
-
A
1
HD67B81-MSTP-A1
HD67B81-MSTP-B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 1 of 32
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 11 of 32
LEDS (for HD67B81-IP-A1):
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance are present
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the IP
address exists several times in the network; the own
NameOfStation exists several times in the network; no
IP address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 12 of 32
LEDS (for HD67B81-MSTP-A1/B2):
The device has got four LEDs (five the –B2 version) that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: Device State Blinks slowly (~1Hz) ON: Device powered
OFF: Device not powered
2: Ethernet Link ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BACnet comm. Blinks quickly when receive BACnet requests Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: PROFINET comm. Blinks quickly when PROFINET communication is
running
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Not Used OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 13 of 32
ETHERNET:
The Ethernet connection must be made using Connector3 of HD67B81-xxx-A1/B2 with at least a Category 5E cable. The maximum length of
the cable should not exceed 1 m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 1 Mbps. To connect
the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of
a cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 14 of 32
RS485 (HD67B81-MSTP-A1/B2):
To terminate the RS485 line with a 12 Ω resistor it is necessary to put ON dip 1, like in figure.
The maximum length of the cable should be 12 m (4 feet).
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 15 of 32
USE OF COMPOSITOR SW67B81:
To configure the Converter, use the available software that runs with Windows called SW67B81. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 1 ; 32/64bit).
When launching the SW67B81, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main w
indow for SW67B
8
1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 16 of 32
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “BACnet Slave / PROFINET Master -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 17 of 32
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the
language of the software and check the updatings for the compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67B81 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 18 of 32
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 19 of 32
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
BACnet and PROFINET.
By Pressing the “Set Communication” button from the main window for SW67B81
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET Master” are:
In the fields “IP Address” the IP address for PROFINET side of the converter
is defined;
In the fields “SubNet Mask” the SubNet Mask for PROFINET side of the
converter is defined;
In the fields “Gateway” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field "Name of Station" the name of the PROFINET node is defined.
If selected “BACnet/IP” the means of the fields for “BACnet Slave” are:
In the fields “IP Address” the IP address for BACnet side of the converter is
defined;
In the fields “SubNet Mask” the SubNet Mask for BACnet side of the
converter is defined;
In the fields “Gateway” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “Port” the port used for BACnet communication is defined.
In the field "BACnet Device Name" the name of BACnet side of the
converter is defined;
In the field “Device Identifier” the device instance of BACnet side of the
converters is defined;
If the field “BACnet description up to 32 chars” is checked, the description
for the BACnet Objects can be up to 32 chars long.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
BAC
net
S
lave /
P
ROFINET
Master
Document code: MN67B81_ENG Revision 1. Page 2 of 32
If selected “BACnet MS/TP”, the means of the fields for “BACnet” are:
In the field “Baudrate” the baudrate of the BACnet line is defined;
In the field “Parity” the parity of the BACnet line is defined;
In the field "BACnet Device Name" the name of BACnet side of the
converter is defined;
In the field “MAC Address” the MAC of BACnet side of the converter is
defined (from to 254);
In the field “Max Master” the highest allowable address for master nodes is
defined. The value shall be less than or equal to 127;
In the field “Max Info Frames” the maximum number of information frames
the node may send before it must pass the token is defined;
In the field “Device Identifier” the device instance of BACnet side of the
converters is defined;
In the field “Network” the BACnet MS/TP network number is defined;
If the field “BACnet description up to 32 chars” is checked, the
description for the BACnet Objects can be up to 32 chars long.