ADTRAN 24-Port DSLAM Access Module IADSL Module User manual

Product Features
■24 ports of G.DMT or G.Lite
ADSL, configurable individually
on a port-by-port basis, along
with baseband POTS
■Front Panel LEDs for
power/card status and loop
status for each subscriber loop
■Interface rates individually
configurable at particular
upstream/downstream rate
combinations or rate adapting
to best rates available on loop
■Upstream/downstream rates
independently configurable in
32 kbps increments
■Upstream and downstream
max, min and target SNR
margin configurable individu-
ally on port basis
■POTS Loop Start and Ground
Start as software options
■Flow-through provisioning from
the switch through GR-303 to
the IADSL module
■V.90 modem support
■Flash download
■Fully hot-swappable
■Industry-leading 10-year
warranty
As broadband continues to grow in popu-
larity and demand, Asymmetric DSL (ADSL)
remains a major DSL service offering.
Carriers are faced with the operational
challenge of delivering both POTS and ADSL
in the most efficient manner.
The ADTRANTM Integrated ADSL (IADSL)
module is an access module for the Total
Access®3000 DSLAM platform that provides
ADSL, splitter, and POTS functions for 24
subscriber interfaces. It works in conjunction
with the DS3 Cell Switch Module to provide a
complete solution for ADSL and POTS inter-
faces.
The IADSL module for the Total Access
3000 DSLAM provides 24 ports of G.DMT or
G.Lite ADSL, configurable individually on a
port-by-port basis, along with baseband
POTS. In order to provide the most deploy-
ment flexibility to carriers providing these
services, ADTRAN has engineered the IADSL
module for maximum capability and respon-
siveness:
•Interface rates individually configurable
at particular upstream/downstream rate
combinations or rate adapting to best
rates available on loop
•Upstream/downstream rates independ-
ently configurable in 32 kbps increments
•Upstream and downstream maximum,
minimum, and target Signal-to-Noise
Ratio (SNR) margin configurable individ-
ually on port basis
•POTS Loop Start and Ground Start
support
•V.90 modem support
ADTRAN has made loop testing easy by
integrating Metallic Test Access supported
with test relays that put local loops onto the
Total Access 3000 DSLAM test bus (via
4-wires) for testing through an external test
head.
The IADSL card supports both SNMP and
standard TL1 test commands for easy
management and operation. Operations,
Administration, Management & Provisioning
(OAM&P) is performed via the Enhanced
System Controller Unit (ESCU) of the Total
Access 3000 DSLAM. The Total Access
Element Management System (EMS) is a
GUI-based management system that provides
one-click provisioning and sophisticated
centralized management capabilities.
POTS interfaces are delivered through a T1
on the front panel of the card. A pushbutton
toggles the Port LED status between POTS
and ADSL indications. The POTS or ADSL
indication state is determined by the position
of the button. The card defaults to the ADSL
indication. POTS status is only shown when
the user is pushing the button. A software
option available via the craft interface screen
allows the default option to be changed.
IADSL Module
24-Port DSLAM Access Module

IADSL Module
Specifications subject to change without notice. ADTRAN is a trademark and Total Access
is a registered trademark of ADTRAN, Inc. All other registered trademarks and trademarks
mentioned in this publication are the property of their respective owners.
Product Specifications
Front Panel Features
■1 Power LED
■1 T1 Status LED
■1 LED for port indication (either ADSL or POTS)
■24 port LEDs
Mechanical
■Dimensions: 5.35 in. H x 1.98 in. W x 10.2 in. D
■Weight: 2 lbs. to 3 lbs.
■Mounting: Occupies three slots in the Total Access
3000 or 3010 chassis
Interfaces
ATM Network Interfaces
■DS3
■OC-3c
■DS1 IMA
TDM Network Interfaces
■DS1
Subscriber Interfaces
■POTS
■ ADSL (G.DMT)
■ ADSL (G.Lite)
24-Port DSLAM Access Module
Electrical
Power Requirements
■–42 VDC to –56 VDC input voltage range
■Can operate from either Total Access 3000 power
bus, A or B.
Regulatory Standards
■NEBS Level 3
■GR-1089-CORE
■UL 1950
■T1.413
■G.992.1 Annex A
■G.992.2 Annex A
Management
■Local Management: via SCU using VT100
■Remote Management: SNMP with support in the Total
Access EMS, TL1
Environmental
■Operating: –40°C to +75°C
■Storage: –40°C to +85°C
■Relative Humidity: Up to 95 percent, noncondensing
Ordering Information
Equipment Part #
IADSL Access Module 1181424L1
Printed in the USA
61181424L1-8A March 2003
©2003 ADTRAN, Inc. All rights reserved.
ADTRAN is a
TL 9000 registered company.
ADTRAN is an
ISO 9001:2000 registered company.
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P. O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
877 457 5007 fax back
General Information
800 9ADTRAN
[email protected]
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
[email protected]
www.adtran.com/support
Where to Buy
800 827 0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726 8663
[email protected]
www.adtran.com/support
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Irvine, CA
949 260 3500
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
International Inquiries
256 963 8000 voice
256 963 6300 fax
[email protected]
www.adtran.com/international
OC-3c
DS3
DS1 IMA
TDM T1
Voice 24 ADSL + POTS
24-Port IADSL
Access Module