Advantech HIT-W183 Instruction manual

HIT-W183/W153
Quick Start Manual
Before installing the system, the user must confirm that the
package contains equipment and the following items:：
•1 x HIT-W183/153
•1 x Accessory box
-1 x This quick start manual
-1 x Adaptor
-Bracket: Fix Adaptor
•China RoHs
If any of these items are missing or damaged, contact your
dealer or sales representative immediately.
Alarm
Front Panel
I/O Port &
Button
VESA Mount
I/O Port
I/O Port
& Button
Front Rear
* Use only VESA-compliant mounting brackets.
A.Alarm Light K.Speaker
B.Smart Card Reader L.Barcode Reader (Optional）
C.Power-in DC Jack M.USB 2.0 Port x2
D.Nursing Call Jack N.Reading Light
E.USB 3.0 Port x2 O.Function Button
F.RJ-45 Portx2 O1.Reading Light On/Off
G.Mic O2.Volume Control Up/Down
H.Earphone O3. Brightness Control Up/Down
I.Reset Button O4.LCD Panel Control On/Off
J. Nursing Call Button (Emergency)
HIT-W183/153 Quick Start Manual 1
Packing List
HIT-W183/153 Overview
For more information about this product and Advantech's
other products, visit our website
：
http://www.advantech.com.tw/support
http://www.advantech.com
For technical service and support, please visit our
technical support website
：
http://www.advantech.com/support
本手册适用于HIT-W183系列。
HIT-W183/153 Front/Rear View

Turn on computer power
1. Make sure the "equipotential terminal" is connected to
the equipotential ground of the hospital
2. Connect the adapter to the power input jack. Please
note that using non-genuine adapters may pose
potential risks to the system
3. When you plug inthe DC power, the HIT will
power on directly.
4. DC Input Voltage: Theadapter only supply 18-19Vdc
Install the Driver
This product has an operating system and drivers installed
If you have trouble installing the operating system,
follow the instructions in the HIT-W183 Instruction
Manual.
Note：Please use the "original genuine operating system"
state to install this automatic installer; otherwise,
an unexpected error may occur.
If you only want to install a specific driver, follow
the instructions in the HIT-W183 Instruction
Manual.
PleasealwayscheckAdvantech websiteforfreedownloading:
http://support.advantech.com/support/new_default.aspx
During normal use, the HIT (Healthcare Information Terminal) may
become dirty and should be cleaned regularly
1. Prepare a cleaning agent per manufacturer’sinstructionor
hospital protocol.
2. Prepare a clean cloth that has been moistened in a cleaning
solution.
3. Wipe the HIT thoroughly with a clean wipe.
Applicable Cleaning Agents List
Number
Detergent
Number
Detergent
1
Glutaraldehyde
11
Virkon and
Water
(1:100)
2
Isopropyl alcohol
12
Dispatch Hospital
Detergent
3
Soft SOAP Tincture
13
Trigene
Disinfectant
4
Windex
14
SDW 70C
5
Alcohol
15
Antigone Wipes
6
70% alcohol
16
Sporeclear
7
Incidin Plus
Disinfectant
17
Antigone
8
Incidin Disinfectant
18
Mikrobac
9
Mikrozid
Disinfectant
10
1000PPM Bleach
* Do not immerse or rinse the HITor its peripherals.
* Do not spray cleaning agents on thechassis
* Do not use disinfectants containingphenol
HIT-W183 /153 Quick Start Manual 2
Easy Setup
Cleaning and Disinfecting
Software Specifications