Advantech DS-980 User manual

User Manual
DS-980/DS-980GL
Video Wall Signage Player by
Expandable PCI Express x16

DS-980/DS-980GL User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel® and Celeron® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
AMI is a registered trademark of American Megatrends Inc.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site
at: http://www.advantech.com/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Part No. 2006098010 Edition 1
Printed in Taiwan September 2016

iii DS-980/DS-980GL User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages

DS-980/DS-980GL User Manual iv
Warnings, Cautions and Notes
Battery Information
Batteries, battery packs, and accumulators should not be disposed of as unsorted
household waste. Please use the public collection system to return, recycle, or treat
them in compliance with the local regulations.
Packing List
Before installation, please ensure the following items have been shipped:
1 x DS-980/DS-980GL system
1 x 12V DC-in 150W power adaptor
1 x accessory box containing the items listed below
–1 x Signage Software (WISE-PaaS/RMM & WebAccess/IMM) CD package
–1 x China RoHS declaration
–1 x Traditional & Simplified Chinese User Manual
–2 x mounting brackets with 4 screws
–4 x stand rubber with 4 screws
–1 x 2nd Storage module including 1 x bracket, 4 x damper, 4 x screws for
installing on a bottom layer, 4 x step screws for installing storage on a
bracket, 1 x SATA cable (option)
–1 x warranty card
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note! Notes provide optional additional information.
Caution! Batteries are at risk of exploding if incorrectly installed. Replace only
with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.

v DS-980/DS-980GL User Manual
Optional Recommended Parts
Power Cord
Part Number Description
1702002600 3-pin power cord with UL (US)
1700024848-01 3-pin power cord with BSMI (TW)
1700018705 3-pin power cord (EU)
1702031801 3-pin power cord (UK)
1700000237 3-pin power cord with PSE (JPN)
1700000596-11 3-pin power cord with CCC (CN)
Kits for Video Wall up to 6 outputs
Part Number Description
96PSA-A84W12W6-1 ADP A/D 100-240V 84W 12V C14 LOCKABLE D
AEGX-N0A4-V5LMS1 GT730 1G PCI-E VHDCI + HDMI*4 Cable LP(G)
WIFI & 3G module by mini-PCIe interface
Part Number Description
AMO-WIFI06E Realtek/wifi 802.11bgn/ mini PCIe, cable, antenna
AMO-WIFI07E DHXA/wifi802.11abgn+BT4.0/miniPCIe,cable,antenna
AMO-HSDPA02E U-blox/HSDPA 6band/miniPCIe,cable,antenna
WIFI module by M.2 E key interface
Part Number Description
EWM-W160M201E 802.11 b/g/n,RTL8188EE,1T1R,2-antenna,M.2 2230
1750007965-01 M.2 cable, 30cm
1750000318 M.2 antenna

DS-980/DS-980GL User Manual vi
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

vii DS-980 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ...............................................................................................2
1.2 Product Features.......................................................................................2
1.2.1 General.........................................................................................2
1.2.2 Display..........................................................................................2
1.2.3 Power Consumption......................................................................2
1.3 Hardware Specifications ...........................................................................3
1.4 Mechanical Specifications.........................................................................4
1.4.1 Dimensions...................................................................................4
Figure 1.1 DS-980 (Expansion) mechanical dimensions.............4
Figure 1.2 DS-980GL (Light) mechanical dimensions.................5
1.4.2 Weight...........................................................................................5
1.5 Power Requirements.................................................................................5
1.5.1 System Power...............................................................................5
1.5.2 RTC Battery..................................................................................5
1.6 Environment Specification.........................................................................6
Chapter 2 External I/O introduction.....................7
2.1 DS-980/DS-980GL Front and Rear views.................................................8
Figure 2.1 DS-980 (Expansion) front view...................................8
Figure 2.2 DS-980 (Expansion) rear view....................................8
Figure 2.3 DS-980GL (Light) front view.......................................9
Figure 2.4 DS-980GL (Light) rear view........................................9
2.2 DS-980/DS-980GL Front External I/O Connectors.................................10
2.2.1 Power ON/OFF Button................................................................10
Figure 2.5 Power button ............................................................10
2.2.2 Ethernet Connector (GLAN)........................................................10
Figure 2.6 GLAN connector.......................................................10
Table 2.1: GLAN Connector Pin Assignments ..........................10
2.2.3 USB2.0 Connector......................................................................11
Figure 2.7 USB2.0 connector ....................................................11
Table 2.2: USB Port Pin Assignments.......................................11
2.2.4 Mic-in Connector.........................................................................11
Figure 2.8 Audio connector........................................................11
2.2.5 SPDIF/ Line-Out Connector........................................................11
Figure 2.9 SPDIF/ Line-out connector .......................................11
2.3 DS-980/DS-980GL Rear External I/O Connectors..................................12
2.3.1 COM Connector..........................................................................12
Figure 2.10COM connector ........................................................12
Table 2.3: COM Port Pin Assignments......................................12
2.3.2 USB3.0 Connector......................................................................12
Figure 2.11USB3.0 connector ....................................................12
Table 2.4: USB 3.0 Connector Pin Assignments.......................12
2.3.3 HDMI Connector.........................................................................13
Figure 2.12HDMI connector........................................................13
Table 2.5: HDMI Connector Pin Assignments...........................13
2.3.4 Power Input Connector...............................................................14
Figure 2.13DC input connector at main layer.............................14
Figure 2.14DC input connector at bottom layer..........................14
Chapter 3 Hardware Installation ........................15

DS-980 User Manual viii
3.1 Before you begin..................................................................................... 16
3.2 Socket Type CPU & Thermal Module Installation................................... 17
Figure 3.1 Socket type CPU & Thermal module installation...... 17
3.3 DDR4 SO-DIMM Memory Installation..................................................... 18
Figure 3.2 DDR4 SO-DIMM memory installation....................... 18
3.4 2.5-inch SATA Storage Installation (Main Layer).................................... 19
Figure 3.3 2.5-inch SATA storage installation (main layer)....... 19
3.5 2.5-inch SATA SSD Installation (Bottom Layer) ..................................... 20
Figure 3.4 2.5-inch SATA SSD installation (bottom layer)......... 20
3.6 Graphic Card & Fan Duct Installation (option)........................................ 21
Figure 3.5 Graphic card installation........................................... 21
Figure 3.6 Fan duct location (1)................................................. 22
Figure 3.7 Fan duct location (2)................................................. 22
3.7 Mini-PCIe Card/ SIM Card/ M.2 WIFI Module Installation (Options)....... 23
Figure 3.8 Mini-PCIe card/ SIM card/ M.2 WIFI module installation
23
3.8 Antenna Installation (Options)................................................................. 24
Figure 3.9 Antenna installation.................................................. 24
3.9 Mounting Brackets Installation................................................................ 25
Figure 3.10Mounting brackets installation.................................. 25
3.10 Stand Rubbers Installation...................................................................... 26
Figure 3.11Stand rubbers installation......................................... 26
3.11 VESA Brackets Installation..................................................................... 27
Figure 3.12VESA brackets installation ....................................... 27
3.12 How to Select Suitable Graphic Cards.................................................... 28
Figure 3.13Maximum board dimension (Unit: mm) .................... 28
Figure 3.14Maximum a graphic card dimension (Unit: mm)....... 29
Figure 3.15Air inlet location........................................................ 29
Chapter 4 BIOS Settings....................................31
4.1 BIOS Introduction.................................................................................... 32
4.2 Entering Setup........................................................................................ 33
4.2.1 Main Setup.................................................................................. 33
Figure 4.1 Main setup................................................................ 33
4.2.2 Advanced Features Setup.......................................................... 34
Figure 4.2 Advanced features setting........................................ 34
Figure 4.3 ACPI Setup Screen.................................................. 35
Figure 4.4 AMT Configuration ................................................... 37
Figure 4.5 PCH-FW Configuration............................................. 37
Figure 4.6 ME FW image........................................................... 38
Figure 4.7 ITE8528E Super IO Configuration............................ 39
Figure 4.8 ITE8528E HW monitor ............................................. 41
Figure 4.9 WatchDog Timer setting........................................... 41
Figure 4.10S5 RTC wake setting................................................ 42
Figure 4.11S5 RTC wake setting................................................ 42
Figure 4.12Serial port console redirection.................................. 43
Figure 4.13COM1 - Console redirection setting......................... 44
Figure 4.14Legacy console redirection setting........................... 45
Figure 4.15Serial Port-console redirection setting...................... 45
Figure 4.16CPU Configuration (1).............................................. 46
Figure 4.17CPU Configuration (2).............................................. 47
Figure 4.18Intel TXT information................................................ 48
Figure 4.19SATA configuration .................................................. 49
Figure 4.20Network Stack Configuration – Disabled.................. 50
Figure 4.21Network Stack – enable ........................................... 50
Figure 4.22CSM Configuration................................................... 51
Figure 4.23USB configuration .................................................... 52
4.2.3 Chipset........................................................................................ 53

ix DS-980 User Manual
Figure 4.24Chipset .....................................................................53
4.2.4 System Agent..............................................................................54
Figure 4.25System Agent...........................................................54
Figure 4.26Graphic Configuration...............................................55
Figure 4.27PEG Port Configuration............................................55
Figure 4.28PCH-IO configuration ...............................................56
Figure 4.29PCI express Configuration........................................57
Figure 4.30PCI express Gen3 EQ Lanes...................................58
Figure 4.31Mini PCI Express/ M.2 (1).........................................59
Figure 4.32Mini PCI Express/ M.2 (2).........................................60
Figure 4.33USB configuration.....................................................60
Figure 4.34HD Audio Configuration............................................61
4.2.5 Security.......................................................................................62
Figure 4.35Security.....................................................................62
4.2.6 Boot.............................................................................................63
Figure 4.36Boot ..........................................................................63
4.2.7 Save & Exit .................................................................................64
Figure 4.37Save & Exit...............................................................64

DS-980 User Manual x

Chapter 1
1General Introduction
This chapter gives background
information of DS-980/DS-980GL
series.

DS-980/DS-980GL User Manual 2
1.1 Introduction
DS-980/DS-980GL is a video wall solution of digital signage players, which is pow-
ered by the 6th generation Intel® Core i7/ i5/ i3/ Celeron rPGA processor (LGA
1151), and stackable design for PCI Express 3.0 x16 expansion.
DS-980/DS-980GL delivers the exceptional graphic performance by Intel HD Graph-
ics 530 which supports HEVC/265, AVC/264, MPEG2, VC1/WMV9, VP8, JPEG/
MJPEG, VP9 video format. Additionally, DS-980/DS-980GL adopts the latest inter-
faces to fulfill the customer’s advanced requirements, such as HDMI2.0 supports
4096 x 2160 @60Hz maximum resolution, DDR4 2133MHz SO-DIMM with dual
channel (maximum capacity for 32GB, 16GB per SO-DIMM), and M.2 (2230 E key)
for wireless function.
Total display outputs on the DS-980/DS-980GL motherboard are 3 x HDMI which are
designed for 1 x HDMI2.0 (printed HDMI1); 2 x 1.4 (printed HDMI2 & HDMI 3; HDMI2
supports CEC function). The maximum resolution is true 4K (4096 x 2160 @ 60Hz).
Not only 3 x HDMI outputs but also the extra outputs from PCI Express 3.0 x16 slot
for optional graphic card further support up to 6 outputs and realize the video wall
application in retails, public services, institute and etc..
1.2 Product Features
1.2.1 General
Intel® Core i7-6700TE, Quad-core 2.4 GHz/ i5-6500TE, Quad-core 2.3 GHz/ i3-
6100TE, Dual-core 2.7 GHz/ Celeron G3900TE, Dual-core 2.3 GHz rPGA pro-
cessor (LGA 1151), CPU TDP up to 35W.
Exceptional graphic performance by Intel HD Graphics 530 and supports 3 x
HDMI outputs (1 x HDMI2.0 & 2 x HDMI 1.4) and its maximum resolution up to
true 4K (4096 x 2160 @ 60Hz).
Stackable and expandable design for PCI Express x16 slot, and the latest dual
channel of DDR4 2133Hz SO-DIMM and 1 x M.2 2230 E key for wireless func-
tions.
Supports 2 x internal 2.5” SATA III storage drive bay by RAID 0/1.
1.2.2 Display
There are 3 x HDMI on DS-980/DS-980GL motherboard for multiple displays which
are designed for 1 x HDMI2.0 (printed HDMI1); 2 x HDMI1.4 (printed HDMI2 & HDMI
3; HDMI2 also supports CEC function). The maximum resolution is true 4K (4096 x
2160 @ 60Hz) by HDMI2.0 interface.
Not only 3 x HDMI outputs but also the extra outputs from PCI Express 3.0 x16 slot
for optional graphic card further supports up to 6 outputs. The best playing status is to
play one true 4K video playback as 6 outputs video wall application like any 1x6, 6x1,
2x3, or 3x2 matrix (but subject to the video media format and playback software).
1.2.3 Power Consumption
Intel Core i7-6700TE:
–Idle mode: 9.56 W (w/o expansion)
–Max. load: 53.61 W (w/o expansion)
Intel Core i5-6500TE:
–Idle mode: 9.20 W (w/o expansion)
–Max. load: 51.68 W (w/o expansion)

3 DS-980/DS-980GL User Manual
Chapter 1 General Introduction
RISER Card:
–Idle/ Max. load: 0.12 W
1.3 Hardware Specifications
CPU (LGA 1151, TDP up to 35W):
–Intel® Core i7-6700TE, Quad-core 2.4 GHz
–Intel® Core i5-6500TE, Quad-core 2.3 GHz
–Intel® Core i3-6100TE, Dual-core 2.7 GHz
–Intel® Core Celeron G3900TE, Dual-core 2.3 GHz
System Chipset: Intel® Q170
BIOS: AMI uEFI 128 Mbit
System Memory:
–2 x 260-pin DDR4 2133MHz SO-DIMM sockets
–Maximum capacity: 32GB (16GB per SO-DIMM)
Graphic chipset: Intel® HD Graphics 530
Storage: (supports RAID 0/1 function)
–Main layer: 1 x 2.5" SATAIII
–2nd layer: 1 x 2.5" SATAIII SSD (option)
–Option: mSATA by full-size mini-PCIe interface
Watchdog Timer: 1-255 seconds, supported by Advantech SUSI4.0 API
I/O Interface:
–3 x HDMI
1 x HDMI2.0 (printed by HDMI1), 2 x HDMI1.4 (printed by HDMI2 & HDMI 3;
HDMI2 also supports CEC function)
The maximum resolution up to true 4K (4096 x 2160 @ 60Hz).
–4 x USB 3.0, 2 x USB 2.0
–1x RS-232/ 2x RS-485 & RS-422 with extension cable
–1 x SPDIF/ Line-Out (jack sense supported by OS setting), 1 x Mic-in (HD
Audio Jack 3.5mm)
–2 x RJ-45 (LAN1: Intel I219 with Phy only, LAN2: Intel I211 with Phy & Mac),
wake on LAN supported
Status: Green: Link (On)/ Active (Flash)
Speed: Green: 100Mbps (On)/ 10Mbps (Off), Orange: 1000Mbps (On)
–2 x DC-in Jack, 1 x Power LED, 1 x Storage LED, 2 x Antenna hole
Internal Expansion:
–1 x PCI Express x16 slot
–1 x full-size mini-PCIe, colay mSATA
–1 x M.2 2230 E key for wireless
–1 x standard SIM slot
Operating System:
–Microsoft Windows 7 (64bit/32bit), Windows 8.1 (64bit), Windows 10 (64bit)

DS-980/DS-980GL User Manual 4
1.4 Mechanical Specifications
1.4.1 Dimensions
Expansion configuration (with PCI express x16 slot):
250 (W) x 190 (D) x 88 (H) mm
Figure 1.1 DS-980 (Expansion) mechanical dimensions
88 [3.46] 190 [7.48]
247.40 [9.74]
220.90 [8.70]
ø4
R1.75
R5
125.10 [4.93]
43 [1.69]
50 [1.97]
86 [3.39]
100 [3.94]
250 [9.84]
88 [3.46]
91 [3.58]
53 [2.09]
35 [1.38]

5 DS-980/DS-980GL User Manual
Chapter 1 General Introduction
Light configuration (without PCI express x16 slot):
250 (W) x 190 (D) x 53 (H) mm
Figure 1.2 DS-980GL (Light) mechanical dimensions
1.4.2 Weight
Expansion configuration (with PCI express x16 slot): 3.8kg
Light configuration (without PCI express x16 slot): 3.1kg
1.5 Power Requirements
1.5.1 System Power
Expansion configuration (with PCI express x16 slot)
–Minimum power input: 12V DC-in 12.5A (for main layer)
–Minimum power input: 12V DC-in 7A (optional for bottom layer)
Light configuration (without PCI express x16 slot)
–Minimum power input: 12V DC-in 12.5A
1.5.2 RTC Battery
3V/ 220mA T BBBCR2032B
53 [2.09] 56 [2.20]
190 [7.48]
247.40 [9.74]
220.90 [8.70]
ø4
R1.75
R5
125.10 [4.93]
43 [1.69]
50 [1.97]
86 [3.39]
100 [3.94]
250 [9.84]
56 [2.20]
53 [2.09]

DS-980/DS-980GL User Manual 6
1.6 Environment Specification
Operating Temperature: 0° C - 45° C (32 ~ 113° F)
Relative Humidity: 95% @ 40° C (non-condensing)
Storage Temperature: -40° C ~ 85° C (-104 ~ 185° F)
Vibration Test:
–-Operating mode: 0.8 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hr/axis.
–-Non-operating mode: 2G, IEC60068-2-6, sine, 5 ~ 500Hz, 1 Octave/ min, 1
hr/ axis.
Shock During Operation: 10 G, IEC 60068-2-27, half sine wave, 11 ms dura-
tion
Certification:
–Safety: UL, CB, BSMI, CCC
–EMC: CE, FCC Class B, BSMI, CCC

Chapter 2
2External I/O
introduction
This chapter introduces DS-980/
DS-980GL series external I/O.

DS-980/DS-980GL User Manual 8
2.1 DS-980/DS-980GL Front and Rear views
Figure 2.1 DS-980 (Expansion) front view
Figure 2.2 DS-980 (Expansion) rear view
WiFi LED
S/PDIF
POWER sw.
HDD LED
GLAN2
GLAN1
USB1
USB2
Mic. in
COMUSB3.0_2USB3.0_1
USB3.0_4USB3.0_3
HDMI 3HDMI 2
DC IN HDMI 1
DC IN

9 DS-980/DS-980GL User Manual
Chapter 2 External I
/
O introduction
Figure 2.3 DS-980GL (Light) front view
Figure 2.4 DS-980GL (Light) rear view
WiFi LED
S/PDIF
POWER sw.
HDD LED
GLAN2
GLAN1
USB1
USB2
Mic. in
COMUSB3.0_2USB3.0_1
USB3.0_4USB3.0_3
HDMI 3HDMI 2
DC IN HDMI 1

DS-980/DS-980GL User Manual 10
2.2 DS-980/DS-980GL Front External I/O Connectors
2.2.1 Power ON/OFF Button
DS-980/DS-980GL has a power ON/OFF button on front side. Push this button to
turn the system ON and OFF. It can also support 4 second delay soft power off.
Figure 2.5 Power button
2.2.2 Ethernet Connector (GLAN)
DS-980/DS-980GL provides 2 x RJ-45 (LAN1: Intel I219 with Phy only, LAN2: Intel
I211 with Phy & Mac), and wake on LAN supported. They are fully compliant with
IEEE 802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides
a standard RJ-45 jack connector with LED indicators on the front side to show its Link
(On)/ Active (Flash) and speed status which is with its green color by 100Mbps (On)/
10Mbps (Off) and its orange color by 1000Mbps (On).
Figure 2.6 GLAN connector
Table 2.1: GLAN Connector Pin Assignments
Pin Signal Name
1MDI0+
2MDI0-
3MDI1+
4MDI1-
5GND
6GND
7MDI2+
8MDI2-
9MDI3+
10 MDI3-
11 VCC
12 ACT
13 Link100#
14 Link1000#