Advantech ASMB-586 User manual

User Manual
ASMB-586
LGA 1151 Intel® Xeon® E and 8th
Gen Core i3/i5/i7 series Micro ATX
Server Board with 4 PCIe, 6 USB
3.1, 8 SATA3, Quad/Dual LANs, IPMI

ASMB-586 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2018
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Xeon, Core i and Pentium® are trademarks of Intel® Corporation.
All other product names or trademarks are properties of their respective owners.
Part No. 2001058600 Edition 1
October 2018

iii ASMB-586 User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known. Your satisfaction is our primary concern. Here is a guide to Advantech’s cus-
tomer services. To ensure you get the full benefit of our services, please follow the
instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

ASMB-586 User Manual iv
Declaration of Conformity
FCC
This device complies with the requirements in part 15 of the FCC rules:
Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this device in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her own expense. The
user is advised that any equipment changes or modifications not expressly approved
by the party responsible for compliance would void the compliance to FCC regula-
tions and therefore, the user's authority to operate the equipment.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.

v ASMB-586 User Manual
Order Information
Part Number Chipset Memory LAN Display IPMI
ASMB-586G4-00A1 C246 DDR4 288-pin ECC/Non-
ECC unbuffered DIMM 4 DVI, HDMI, VGA Optional
ASMB-586G2-00A1 C246 DDR4 288-pin ECC/Non-
ECC unbuffered DIMM 2 DVI, HDMI, VGA Optional

ASMB-586 User Manual vi
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Initial Inspection
Before you begin installing your motherboard, please make sure that the following
materials have been shipped:
1 Startup manual
2 Serial ATA HDD data cables
2 Serial ATA HDD power cables
1 COM cable for I/O port bracket
1 I/O port bracket
1 Warranty card
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately. We have carefully inspected the ASMB-586 mechanically and
electrically before shipment. It should be free of marks and scratches and in perfect
working order upon receipt. As you unpack the ASMB-586, check it for signs of ship-
ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or your local sales
representative immediately. Also notify the carrier. Retain the shipping carton and
packing material for inspection by the carrier. After inspection, we will make arrange-
ments to repair or replace the unit.

vii ASMB-586 User Manual
Contents
Chapter 1 Hardware Configuration......................1
1.1 Introduction ............................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Specifications ............................................................................................ 3
1.3.1 CPU .............................................................................................. 3
1.3.2 PCH .............................................................................................. 3
1.3.3 Memory ......................................................................................... 3
1.3.4 Input/Output .................................................................................. 3
1.3.5 Graphics........................................................................................ 4
1.3.6 Ethernet LAN ................................................................................ 4
1.3.7 Industrial Features ........................................................................ 4
1.3.8 Mechanical and Environmental Specifications.............................. 4
1.4 Jumpers and Connectors .......................................................................... 5
Table 1.1: Jumper list .................................................................. 5
Table 1.2: Connector list.............................................................. 6
1.5 Board Layout: Jumper and Connector Locations...................................... 7
Figure 1.1 Jumper and Connector Locations............................... 7
Figure 1.2 I/O connectors ............................................................ 7
1.5.1 Onboard LAN LED Definition ........................................................ 8
Table 1.3: Onboard LAN LED Definition...................................... 8
1.5.2 Onboard LED (LED2, LED3, LED4).............................................. 8
Table 1.4: Onboard LED (LED2, LED3, LED4) ........................... 8
1.6 ASMB-586 Block Diagram ........................................................................ 9
Figure 1.3 ASMB-586 Block Diagram.......................................... 9
1.7 Safety Precautions .................................................................................... 9
1.8 Jumper Settings ...................................................................................... 10
1.8.1 How to set jumpers ..................................................................... 10
Table 1.5: CMOS clear (JCMOS1) ............................................ 10
Table 1.6: ME update (JME1).................................................... 11
Table 1.7: Watchdog timer output (JWDT1) .............................. 11
Table 1.8: USB power switch (JUSB1/JUSB2).......................... 12
Table 1.9: Fan mode selection (CPUFAN_SEL1, SYSFAN_SEL1)
12
Table 1.10:ATX/AT mode selector (PSON1).............................. 13
Table 1.11: PCIEX16_Slot6 link switch (JPEG2, JPEG1) ........... 13
1.9 System Memory ...................................................................................... 14
Chapter 2 Connecting Peripherals ....................15
2.1 Introduction ............................................................................................. 16
2.2 USB Ports (LAN1_USB1_2, LAN2_USB3_4, USB5~13)........................ 16
2.3 USB Power Switch (JUSB1/JUSB2) ....................................................... 17
2.4 Display Connector (HDMI1_VGA1, DVI1)............................................... 18
2.5 Serial Ports (COM1~2)............................................................................ 19
2.6 External Keyboard & Mouse (KBMS1).................................................... 20
2.7 CPU Fan Connector (CPUFAN0)............................................................ 21
2.8 System FAN Connector (SYSFAN0 ~ SYSFAN3) .................................. 22
2.9 Front Panel Connectors (JFP1/2/3) ........................................................ 23
2.9.1 Power LED (JFP3 pins 1, 3) ....................................................... 24
2.9.2 External Speaker (JFP2 pins 1, 4, 7, 10).................................... 24
2.9.3 HDD LED Connector (JFP1 pins 2 & 5)...................................... 24
2.9.4 SNMP SMBus Connector (JFP2 pins 8 & 11)............................. 24
2.9.5 ATX Soft Power Switch (JFP1 pins 3 & 6) .................................. 24
2.9.6 Reset Connector (JFP1 pins 9 & 12) .......................................... 24

ASMB-586 User Manual viii
2.10 Alarm Board Connector (VOLT1)............................................................ 25
2.11 Case Open Connector (JCASE1) ........................................................... 26
2.12 Front Panel LAN Indicator Connector (LANLED1).................................. 27
2.13 Serial ATA Interface (SATA0~7) ............................................................. 28
2.14 PCIe x16 Expansion Slot (PCIEX16_SLOT6)......................................... 29
2.15 PCIe x4/x1 Expansion Slot (PCIEX4_SLOT4/7, PCIEX1_SLOT5)......... 31
2.16 Auxiliary Power Connector (ATX12V1)................................................... 32
2.17 SPI Flash Connector (SPI_CN1) ............................................................ 33
2.18 Low Pin Count Connector (LPC1)........................................................... 34
2.19 PMBUS Connector (PMBUS1) ............................................................... 35
Chapter 3 BIOS Operation ................................. 37
3.1 Introduction ............................................................................................. 38
Figure 3.1 Main setup screen ................................................... 38
3.2 Entering BIOS Setup............................................................................... 39
3.2.1 Main Menu .................................................................................. 39
Figure 3.2 Main setup screen .................................................... 39
3.2.2 System Time / System Date ....................................................... 39
3.3 Advanced BIOS Features Setup............................................................. 40
Figure 3.3 Advanced BIOS features setup screen .................... 40
3.3.1 Platform Misc Configuration........................................................ 41
Figure 3.4 Platform misc configuration screen .......................... 41
3.3.2 CPU Configuration...................................................................... 42
Figure 3.5 CPU configuration screen ........................................ 42
3.3.3 Power & Performance................................................................. 46
Figure 3.6 CPU - power management control screen ............... 46
3.3.4 PCH-FW Configuration ............................................................... 48
Figure 3.7 PCH-FW configuration screen.................................. 48
3.3.5 Trusted Computing ..................................................................... 55
Figure 3.8 TPM settings screen................................................. 55
3.3.6 ACPI Settings ............................................................................. 56
Figure 3.9 ACPI settings screen............................................... 56
3.3.7 SMART Settings ......................................................................... 57
Figure 3.10SMART settings screen............................................ 57
3.3.8 Super IO Configuration ............................................................... 58
Figure 3.11Super IO configuration screen.................................. 58
3.3.9 NCT6776 HW Monitor ................................................................ 60
Figure 3.12PC health status screen ........................................... 60
3.3.10 PCA-COM232/COM485 Super IO Configuration........................ 63
Figure 3.13Optional PCA-COM configuration screen................. 63
3.3.11 S5 RTC Wake Settings............................................................... 65
Figure 3.14S5 RTC wake settings screen .................................. 65
3.3.12 Serial Port Console Redirection.................................................. 66
Figure 3.15Serial port console redirection screen ...................... 66
3.3.13 Intel TXT Information .................................................................. 69
Figure 3.16Intel TXT information screen .................................... 69
3.3.14 PCI Subsystem Settings ............................................................. 70
Figure 3.17PCI subsystem settings screen ................................ 70
3.3.15 USB Configuration ...................................................................... 71
Figure 3.18USB configuration screen......................................... 71
3.3.16 UEFI Network Stack Configuration ............................................. 75
Figure 3.19UEFI network stack configuration screen................. 75
3.3.17 CSM Configuration ..................................................................... 76
Figure 3.20CSM configuration screen ........................................ 76
3.4 Chipset.................................................................................................... 82
Figure 3.21Chipset screen ......................................................... 82
3.4.1 System Agent (SA) Configuration............................................... 82
Figure 3.22System agent (SA) configuration screen.................. 82

ix ASMB-586 User Manual
3.4.2 PCH-IO Configuration ................................................................. 88
Figure 3.23PCH-IO configuration screen.................................... 88
Figure 3.24PCI Express configuration screen ............................ 90
Figure 3.25SATA and RST configuration screen........................ 92
Figure 3.26USB configuration screen......................................... 93
Figure 3.27Security configuration screen ................................... 94
Figure 3.28HD Audio configuration screen................................. 95
3.5 Security ................................................................................................... 96
Figure 3.29Security screen......................................................... 96
3.6 Boot......................................................................................................... 97
Figure 3.30Boot screen .............................................................. 97
3.7 Save & Exit.............................................................................................. 98
Figure 3.31Save & Exit screen ................................................... 98
3.8 Server Mgmt............................................................................................ 99
Figure 3.32Server Mgmt screen ................................................ 99
3.8.1 System Event Log..................................................................... 101
3.8.2 BMC Self Test Log.................................................................... 103
3.8.3 BMC Network Configuration ..................................................... 104
Chapter 4 Driver Installation ............................105
4.1 Before You Begin .................................................................................. 106
4.2 Introduction ........................................................................................... 106
4.2.1 Chipset...................................................................................... 106
4.2.2 Graphics.................................................................................... 107
4.2.3 LAN ........................................................................................... 107
4.2.4 HD Audio................................................................................... 107
4.2.5 Intel ME..................................................................................... 107
4.2.6 SATA RAID ............................................................................... 108
Appendix A Programming the Watchdog Timer109
A.1 Watchdog Timer Overview.................................................................... 110
A.2 Programming the Watchdog Timer ....................................................... 110
Table A.1: Watchdog timer registers........................................ 112
A.2.1 Example Programs ................................................................... 112
Appendix B I/O Pin Assignments........................117
B.1 USB2.0 Header (USB7~12) .................................................................. 118
Table B.1: USB2.0 Header (USB7~12) ................................... 118
B.2 USB3.1 Header (USB5_6) .................................................................... 118
Table B.2: USB 3.1 Header (USB5_6)..................................... 118
B.3 VGA Connector (VGA1) ........................................................................ 119
Table B.3: VGA Connector (VGA1) ......................................... 119
B.4 RS-232 Interface (COM1~2) ................................................................. 119
Table B.4: RS-232 Interface (COM1~2)................................... 119
B.5 External Keyboard and Mouse Connector (KBMS1)............................. 120
Table B.5: External Keyboard and Mouse Connector (KBMS1)....
120
B.6 System Fan Power Connector (SYSFAN0~3) ...................................... 120
Table B.6: Fan Power Connector (SYSFAN0~3)..................... 120
B.7 Power LED and Keyboard Lock (JFP3) ................................................ 120
Table B.7: Power LED and Keyboard Lock (JFP3).................. 120
B.8 External Speaker Connector (JFP2) ..................................................... 121
Table B.8: External Speaker Connector (JFP2)....................... 121
B.9 HDD LED Connector (JFP2) ................................................................. 121
Table B.9: HDD LED Connector (JFP2) .................................. 121

ASMB-586 User Manual x
B.10 SNMP SMBus Connector (JFP2).......................................................... 121
Table B.10:SNMP SMBus Connector (JFP2) ........................... 121
B.11 ATX Soft Power Switch (JFP1) ............................................................. 122
Table B.11:ATX Soft Power Switch (JFP1) .............................. 122
B.12 Reset Connector (JFP1) ...................................................................... 122
Table B.12:Reset Connector (JFP1)......................................... 122
B.13 Front Panel Audio Connector (FPAUD1) .............................................. 122
Table B.13:Front Panel Audio Connector (FPAUD1) ............... 122
B.14 8-pin Alarm Board Connector (VOLT1)................................................. 123
Table B.14:8-pin Alarm Board Connector (VOLT1) .................. 123
B.15 Case Open Connector (JCASE1) ......................................................... 123
Table B.15:Case Open Connector (JCASE1)........................... 123
B.16 Front Panel LAN LED Connector (LAN_LED1) .................................... 123
Table B.16:LAN LED Connector (LANLED1) ........................... 123
B.17 SPI Flash Card Pin Connector (SPI_CN1) ........................................... 124
Table B.17:SPI Flash Connector (SPI_CN1)............................ 124
B.18 GPIO Connector (GPIO1) ..................................................................... 124
Table B.18:GPIO Connector (GPIO1) ...................................... 124
B.19 SMBUS Connector (SMBUS1) ............................................................. 124
Table B.19:SMBUS Connector (SMBUS1)............................... 124
B.20 PMBUS Connector (PMBUS1) ............................................................. 124
Table B.20:PMBUS Connector (PMBUS1)............................... 125
B.21 System I/O Ports................................................................................... 125
Table B.21:System I/O Ports .................................................... 125
B.22 Interrupt Assignments ........................................................................... 126
Table B.22:Interrupt Assignments ............................................ 126
B.23 1st MB Memory Map............................................................................. 126
Table B.23:1st MB Memory Map .............................................. 126

Chapter 1
1Hardware
Configuration

ASMB-586 User Manual 2
1.1 Introduction
ASMB-586 motherboard is designed with the most advanced Intel® C246 PCH for
industrial server grade applications that require high-performance. The motherboard
supports Intel® Xeon® E & 8th Gen Core i3/i5/i7 processor with DDR4 288-pin 2666/
2400/2133 MHz ECC/Non-ECC memory for up to 64 GB. ASMB-586 also provides
cost-effective Intel HD graphics integrated on processor, and the graphics VRAM is 1
GB maximum shared memory with 2 GB and above system memory installed. There
is one PCIe x16 slot (Gen3 x16 link), and two PCIe x4 slots (Gen3 x4 link), and one
PCIe x1 slot (Gen3 x1 link) to fulfill multi-PCIe demands from video surveillance and
factory automation markets. In addition, ASMB-586 also comes with four Gigabit
Ethernet LAN (G4 version) via dedicated PCIe bus, which offers bandwidth up to 500
MB/s eliminating network bottlenecks.
By using the Intel® C246 chipset, the ASMB-586 offers a variety of features such as
eight onboard SATA III interfaces (bandwidth = 600 MB/s) with software RAID, six
USB 3.1 and seven USB 2.0 ports. These powerful I/O capabilities ensure even more
reliable data storage capabilities and high-speed I/O peripheral connectivity.
The ASMB-586 also adopts Advantech’s unique, patented Sleep Mode Control
Circuit for AT Power Mode. With all these excellent features and outstanding perfor-
mance, ASMB-586 is the ideal platform for today’s industrial applications.
1.2 Features
Triple Display: One VGA, DVI-D, and HDMI port can be used to implement tri-
ple display outputs.
PCIe architecture: One PCIe x16 slot (x16 link), two x4 and one x1 slots from
Intel C246 PCH.
High Performance I/O capability: Quad or dual Gigabit LAN via PCIe bus, six
USB 3.1 (four Gen2 + two Gen1) and seven USB 2.0 including one Type A 2.0
ports, eight SATA III connectors.
Standard Micro-ATX form factor with industrial features: ASMB-586 pro-
vides industrial features like longevity, wide temperature range operation,
watchdog timer functions, and more.
Automatic power on after power failure: It is often necessary to have an unat-
tended system come back into operation when power resumes after a power
failure. Advantech’s industrial server board allows users to set the system to
power on automatically without hitting power button. Please refer to the detailed
"AT" mode settings by jumper in Section 1.8.1.6.
Active Management Technology: is hardware and firmware technology for
remote monitoring and management of networked computers. Intel AMT (iAMT)
stores hardware and software information in non-volatile memory. Built-in man-
agement provides out-of-band management capabilities, allowing remote dis-
covery and KVM to repair systems after OS failures or when a system has
crashed. Alert and event logging features detect problems and quickly reduce
downtimes, pro-actively blocking incoming threats, containing infected clients
before they impact the network, and pro-actively notifying the user when critical
software agents are removed. To enable iAMT, please refer to AMT configura-
tion in BIOS.

3 ASMB-586 User Manual
Chapter 1 Hardware Configuration
1.3 Specifications
1.3.1 CPU
Supports Xeon E and 8th Gen. Core i3, i5 & i7 CPU in an LGA1151 socket.
Max. TDP support up to 95 W.
1.3.2 PCH
System Chipset: Intel® C246
SATA hard disk drive interface: Eight on-board SATA III connectors support
Advanced Host Controller Interface (AHCI) technology, and Intel Rapid Storage
Technology Enterprise (RSTe) supports software RAID 1, 0, 10 and 5 with data
transmission rates up to 600 MB/s.
1.3.3 Memory
RAM: Up to 64 GB in four 288-pin DIMM sockets. Supports dual-channel DDR4
ECC/Non-ECC 2666/2400/2133 unbuffered DIMM.
1.3.4 Input/Output
PCIe slot: One PCIe x16 expansion slots (Gen3 x16 link) and two PCIe x4
expansion slots (Gen3 x4 link) and one PCIe x1 expansion slot (Gen3 x1 link).
Serial port: Two serial ports onboard headers (one can be used for rear I/O port
bracket via COM cable connection), only supports RS-232.
PS/2 Keyboard and mouse connector: To save rear I/O space, ASMB-586
reserve a 6-pins header on board (KBMS1) and via a cable kit to build two 6-pin
mini-DIN connectors for easy connection to PS/2 keyboard and mouse.
USB port: Supports up to six USB 3.1 ports, four Gen2 ports in rear IO with
transmission up to 10Gbps and seven USB 2.0 ports onboard with transmission
rates up to 480 Mbps.
LPC: One LPC connector supports Advantech TPM LPC modules and COM
232/422/485 modules.
GPIO: ASMB-586 supports 8-bit GPIO from super I/O for general purpose con-
trol applications.
Note! Only Windows 10 (64-bit) and Windows Server 2016 (64-bit) can be
supported on this platform.
Note! 1. Due to the inherent limitations of the PC architecture, the system may
not fully detect 64 GB RAM when 64 GB RAM is installed.
2. A 32-bit OS may not fully detect 4 GB of RAM when 4 GB is installed.
Note! ASMB-586 has an onboard KBMS1 connector for external keyboard/
mouse usage. Please purchase an optional PS/2 keyboard/mouse cable
(P/N:1700019268-11) and its bracket (P/N:1960063434N000) to be
installed on the chassis rear slot.

ASMB-586 User Manual 4
1.3.5 Graphics
Graphics processor: Integrated Intel HD Graphics.
Display memory: 1 GB maximum shared memory with 2 GB and above system
memory installed. (BIOS default is 256MB)
DVI-D: Up to 1920 x 1200 resolution @ 60 Hz refresh rate.
D-Sub: Up to 1920 x 1200 resolution @ 60 Hz refresh rate.
HDMI: Supports HDMI 2.0 up to 4096 x 2160 resolution @ 60 Hz refresh rate.
1.3.6 Ethernet LAN
Interface: Supports four 10/100/1000 Mbps Ethernet port (s) via PCIe bus
which provides up to 125 MB/s data transmission rates.
Controller: LAN1: Intel I219-LM; LAN2 ~ 4: Intel I210-AT (LAN2 is BMC shared
NIC when the optional IPMI-1000 module is installed; LAN3/4 is for G4 SKU
only)
1.3.7 Industrial Features
Watchdog timer: can generate a system reset or NC. The watchdog timer is
programmable, with each unit equal to one second or minute (255 levels).
IPMI: Supports IPMI 2.0 via optional IPMI-1000 module (P/N: IPMI-1000-
00A2E).
1.3.8 Mechanical and Environmental Specifications
Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)
Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
Humidity: 5 ~ 95% non-condensing
Power supply voltage: +3.3 V, +5 V, ±12 V, 5 VSB
Power consumption:
Max. load: +3.3 V @ 3.87 A, +5 V @ 4.11 A, +12 V @ 0.63 A, +12 V (8P) @
6.28 A, +5 Vsb @ 0.09 A, -12 V @ 0.238 A
Board size: 244 x 244 mm (9.6" x 9.6")
Board weight: 0.5 kg (1.123 lb)

5 ASMB-586 User Manual
Chapter 1 Hardware Configuration
1.4 Jumpers and Connectors
Connectors on the ASMB-586 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below lists the functions of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label Function
CPUFAN_SEL1,
SYSFAN_SEL1 FAN PWM (1-2) / DC mode (2-3)
HDMI_I2C1 For RD debug purpose
JCASE1 Case open
JCMOS1 CMOS clear
JME1 Intel ME disable jumper for ME/BIOS update
JPEG1, JPEG2 PCIEX16_SLOT6 PCIe link switch between x16 or x8x8
or x8x4x4 (for riser card)
JPEG3 Default (1-2) / reserve for debug (2-3)
JTHR_SEL1 To select on board or external thermistor
JTHR_SEL1 To select on board or external thermistor
JUSB1 Rear window USB 3.1 Gen2 port power source switch
between +5 VSB and +5 V
JUSB2 On board USB2.0/3.1 Gen1 port power source switch
between +5 VSB and +5 V
JWDT1 Watchdog reset
PSON1 AT(1-2) / ATX(2-3)

ASMB-586 User Manual 6
*COM1 in BIOS is directed to the PCB silk screen as COM1 or COM3.
Table 1.2: Connector list
Label Function
ATXPWR1 ATX 24-pin main power connector (for System)
ATX12V1 8-pin power connector (for CPU)
BAT2 For optional battery kit
BMC1 BMC connector to support IPMI-1000 module (P/N: IPMI-
1000-00A2E)
COM1*, COM2 Serial port: RS-232
CPUFAN0 CPU FAN connector
DIMMA0,DIMMA1,
DIMMB0,DIMMB1 DDR4 288-pin slot
DVI1 DVI-D connector
EX_THR1 For external thermistor cable kit
FPAUD1 Front Panel Audio Header
GPIO1 8-bit GPIO header
HDMI1_VGA1 HDMI + VGA connector
JFP1 Power switch / Reset connector
JFP2 External speaker / HDD LED connector/ SM Bus
connector
JFP3 Keyboard lock and power LED
KBMS1 External keyboard and mouse connector (6-pin)
LAN1_USB1_2, LAN2_USB3_4 LAN1 / USB 3.1 Gen2 port 1, 2 stack connector
LAN2 / USB 3.1 Gen2 port 3, 4 stack connector
LAN3_4 LAN3 & LAN4 connector
LANLED1 LAN LED extension connector
LPC1 Low pin count connector for Advantech TPM and RS-232/
422/485 modules
PCIEX4_SLOT4 PCIe x4 slot (Gen3 x4 link)
PCIEX1_SLOT5 PCIe x1 slot (Gen3 x1 link)
PCIEX16_SLOT6 PCIe x16 slot (Gen3 x16 link)
PCIEX4_SLOT7 PCIe x4 slot (Gen3 x4 link)
PMBUS1 PMBUS connector to communicate with power supply
SATA0~7 SATA III (6Gb/s)
SGPIO1, SGPIO2 Serial general purpose I/O
SMBUS1 SM Bus from PCH
SPDIF_OUT1 SPDIF audio output pin header
SPI_CN1 SPI flash card pin header (for RMA)
SPI4 BIOS SPI ROM
SYS_LED1 System information LED connector (reserved)
SYSFAN0,SYSFAN1,
SYSFAN2,SYSFAN3 System FAN connector
USB7_8, USB9_10, USB11_12 USB 2.0 port (header)
USB13 USB 2.0 port (USB Type A)
USB5_6 USB 3.1 Gen1 port (header)
VOLT1 Voltage display

7 ASMB-586 User Manual
Chapter 1 Hardware Configuration
1.5 Board Layout: Jumper and Connector
Locations
Figure 1.1 Jumper and Connector Locations
Figure 1.2 I/O connectors
HDMI1_VGA1
LAN3_LAN4
DVI1
LAN2_
USB3_4
COM2
Intel LGA1151 Socket
USB9_10
KBMS1
USB13
USB5_6
Intel C246 PCH
JCMOS1
PMBUS1
BMC1
DIMM A0
LAN1_
USB1_2
AUDIO1_2
PCIEX4_SLOT4
PCIEX1_SLOT5
PCIEX16_SLOT6
PCIEX4_SLOT7
COM1
DIMM A1
DIMM B0
DIMM B1
ATX12V1
FDAUD1
USB11_12
USB7_8
ATXPWR1
VOLT1
SYSFAN
_SEL1
JWDT1
CPUFAN_SEL1
EX_THR1
JTHR_SEL1
JPEG1~2
SYS_LED1
SYSFAN2
SYSFAN1
SYSFAN0
LAN_LED1
GPIO1
SGPIO1~2
JFP1 + JFP2
JFP3
SMBUS1
LPC1
PSON1
SPI_CN1
SATA0~7
JUSB2
JCASE1
JME1
SPDIF_OUT1
SYSFAN3
CPUFAN0
BAT2
SPI4
JUSB1
Onboard LED2/3/4
COM1(reserved) VGA1 LAN4 LAN1 LAN2
DVI1 HDMI1 LAN3 USB1 AUDIO1
USB2
USB3
USB4

ASMB-586 User Manual 8
1.5.1 Onboard LAN LED Definition
1.5.2 Onboard LED (LED2, LED3, LED4)
The ASMB-586 has onboard power LED for 5V Power, 5V Standby and 3.3V AUX.
Table 1.3: Onboard LAN LED Definition
10/100/1000 Mbps LAN Link/Activity LED Scheme
LAN1 ~ LAN2 LAN3 ~ LAN4
Left LED Right LED Left LED Right LED
10 Mbps Link
Active
Off
Off
Green
Blinking green
Green
Blinking green
Off
Off
100 Mbps Link
Active
Amber
Amber
Green
Blinking green
Green
Blinking green
Amber
Amber
1000 Mbps Link
Active
Green
Green
Green
Blinking green
Green
Blinking green
Green
Green
No Link Off Off Off Off
Table 1.4: Onboard LED (LED2, LED3, LED4)
LED Description LED Definition
5V_LED2 Power on LED Off:
Power off
On (Green):
System is On
5VSB_LED3 Standby LED Off:
No input AC Power
On (Green):
System is ON, in sleep mode,
or in soft-off mode
3V3DSW_LE
D4 Deep sleep well LED
Off: No input AC
power, deep sleep
mode enabled
On (Green): System is ON, in
s l e e p m o d e , i n s o f t -
off mode, or deep sleep mode
disable

9 ASMB-586 User Manual
Chapter 1 Hardware Configuration
1.6 ASMB-586 Block Diagram
Figure 1.3 ASMB-586 Block Diagram
1.7 Safety Precautions
Intel Xeon E and
8th Generation
Core i3/i5/i7 series
Processors
Intel C246
PCH
Channel A
(ECC/Non-ECC) DDR4 2133/2400/2666
(ECC/Non-ECC) DDR4 2133/2400/2666
(ECC/Non-ECC) DDR4 2133/2400/2666
(ECC/Non-ECC) DDR4 2133/2400/2666
HD Audio
AUDIO ALC892
PCIe Gen1 x1
GbE LAN1: I219
MDI
RJ45
10/100/1G
Audio
AUDIO
Connector &
SPDIF OUT
PCIe Gen2 x1
GbE LAN4: I210
MDI
RJ45
10/100/1G
PCIe Gen2 x1
GbE LAN3: I210
MDI
RJ45
10/100/1G
PCIe Gen2 x1
GbE LAN2: I210
HWM NCT7802YPin Header
LPC Connector
USB 2.0
PCIe Gen2 x1
BMC
Connector
(Optional)
Super I/O
Nuvoton
NCT6776D
MDI
IS-
CN
SM BUS
LPC BUS
RJ45
10/100/1G
Channel B
OIDUA
4x3neG
IMD
PCIe Gen3 x16
PCIe x16 Slot
Slot 6
PCIe Gen3 x4
PCIe x4 Slot
Slot 4
PCIe Gen3 x1
PCIe x1 Slot
Slot 5
PCIe Gen3 x4
SATA3
6 Gb/s
PCIe x4 Slot
CASE OPEN
5 x FAN
H/W Monitor
PS/2 KB, MS
2 x RS-232
8 bit GPIO Pin Header
SPI BUS
SPI BIOS
Slot 7
Display Port 1
TMDS
Level ShifterDVI-D
Display Port 3
TMDS
ConverterHDMI
Display Port
Embedded
RGB
ConverterVGA D-Sub
8 x SATA3
(RAID 0,1,5,10)
USB 2.0
7 x USB2.0
USB 3.1
6 x USB3.1
Warning! Always completely disconnect the power cord from your chassis when-
ever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sud-
den power surges. Only experienced electronics personnel should open
the PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to static
electric discharges. As a safety precaution, use a grounding wrist strap
at all times. Place all electronic components on a static-dissipative sur-
face or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer’s instructions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.

ASMB-586 User Manual 10
1.8 Jumper Settings
This section provides instructions on how to configure your motherboard by setting
the jumpers. It also includes the motherboard default settings and your options for
each jumper.
1.8.1 How to set jumpers
You can configure your motherboard to match the needs of your application by set-
ting the jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists
of two metal pins and a small metal clip (often protected by a plastic cover) that slides
over the pins to connect them. To “close” (or turn on) a jumper, you connect the pins
with the clip. To “open” (or turn off) a jumper, you remove the clip. Sometimes a
jumper consists of a set of three pins, labeled 1, 2, and 3. In this case you connect
either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set-
ting jumpers.
1.8.1.1 CMOS clear (JCMOS1)
The ASMB-586 motherboard contains a jumper that can erase CMOS data and reset
the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set JCMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
Table 1.5: CMOS clear (JCMOS1)
Function Jumper Setting
* Keep CMOS data
Clear CMOS data
* default setting
1-2 closed
123
2-3 closed
123