Advantech PCA-6028 Installation and operation manual

PCA-6028 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCA-6028 PICMG 1.0 Single Board Computer
2. 1 x PCA-6028 Startup Manual
3. 1 x CD with utility
4. 2 x Serial ATA HDD data cables
5. 1 x Serial ATA HDD power cable
6. 1 x COM port cable kit
7. 1 x 4-port USB cable kit
8. 1 x keyboard and mouse Y cable
9. 1 x jumper package
10. 1 x warranty card
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of PCA-6028, please refer
to the user manual in the enclosed CD-ROM (in
PDF format).
Note 2: Acrobat Reader is required to view any PDF
le. Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
PCA-6028
LGA1150 Intel®CoreTM i7/i5/i3/Pentium®/PICMG 1.0
Single Board Computer with DDR3/Dual GbE LAN
Startup Manual
General
• CPU: LGA1150 Intel®Core™ i7/i5/i3/Pentium®
• BIOS: AMI 128 Mb SPI BIOS
• Chipset: Intel® H81
• System memory: Dual channel 2x 240-pin DDR3
1333/1600 8 GB per DIMM without ECC; max. capacity
up to 16 GB
• SATA ports: 1 x SATAII, 2 x SATAIII, 1 x mSATA
Note 1: SATA3.0: 600MB/sec; SATA2.0:300MB/sec
• Serial ports: Two RS-232 with pin headers
• Keyboard/mouse connector: Supports one standard
PS/2 keyboard and mouse connector and one external
6-pin header
• Watchdog timer: 255 level timer intervals
• USB 2.0: Up to 8 (6 x pin header, 1 x vertical type A, 1 x
rear in G2 SKU only)
• USB 3.0: 2x pin header
• GPIO: One programmable 8-bit GPIO pin-header
VGA Interface
• Chipset: Intel
®
HD graphics
• Shared system memory is subject to OS
Ethernet Interface
• Chipset Supports:
- LAN1: Intel®I217V
- LAN2: Intel
®
I210
• Connection: 2 on-board RJ-45 connectors with LED
indicators”
Mechanical and Environmental
• Dimensions: (L x W): 338 x 122 mm
• Power supply voltage: +12 V, +5 V, +5 VSB
• Power requirements:
Core™ [email protected]; 8GB DDR3 1600 2Rx8*2;
SATA HDD*1
Voltage: +12 V, +5 V, +3.3 V, +5 Vsb, -12 V, -5 V
Current: 4.94 A, 1.83 A, 0 A, 0.01 A, 0 A, 0 A
• Operating temperature: 0 ~ 60 °C (depending on CPU)
• Weight: 0.5 kg (weight of board)
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com.tw/support/default.
aspx
This manual is for the PCA-6028 Series Rev. A3.
Part No. 2006602803
Printed in China
4th Edition
October 2022

2 PCA-6028 Startup Manual
The board has a number of jumpers that allow you to con-
gure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Connectors
Label Function
LPT1 Parallel port, parallel port x 1, supports
SPP/EPP/ECP mode
LAN1 Intel® I217V
LAN2 Intel® I210 (G2 sku only)
VGA1 VGA connector
KBMS1 PS/2 keyboard and mouse connector
KBMS2 External keyboard/mouse connector
COM1 Serial port: COM1; RS-232 (9-pin Box
Header)
COM2 Serial port: COM2; RS-232 (9-pin Box
Header)
JIR Infrared connector
JFP3
(Keyboard
Lock and
Power LED)
Power LED
Suspend: Fast ash (ATX/AT)
System On: ON (ATX/AT)
System O󰀨: OFF (ATX/AT)
JFP2 External speaker/SATA HDD LED con-
nector
JFP1 Power switch/Reset connector
JCASE1 Case open
CPUFAN1 CPU FAN connector (4-pin)
LANLED1 LAN1/2 LED extension connector
HDAUD1 HD audio extension module connector
USB01 USB port 0, 1 (3.0)
USB23 USB port 2, 3
USB45 USB port 4,5
USB8 USB port 8 (G2 SKU only)
USB9 USB port 9
USB1011 USBport 10, 11
SATA1 Serial ATA1 (3.0)
SATA2 Serial ATA2 (3.0)
SATA3 Serial ATA3
CPU1 CPU socket
DIMMA1 Memory connector channel A
DIMMB1 Memory connector channel B
GPIO1 GPIO pin header (SMD pitch-2.0 mm)
LPC1 COM port module expansion pin-header
DVI1 DVI connector
MINIPCIE1 mSATA connector
SMBUS1 SMBus connector
ATX12V1 12V connector
ATXF1 ATX power connector
Jumpers
Label Function
JCMOS1 CMOS clear
JME1 Clear ME data
JWDT Watchdog timer output selection
JOBS1 HW monitor alarm
1 2 3
JCMOS1/JME1: Clear CMOS/ME Data
Closed Pins Result
1-2 Keep CMOS/ME data (Default)
2-3 Clear CMOS/ME data
H/W Monitor Alarm (JOBS1)
Function Jumper Setting
Closed Enable OBS alarm (Default)
Open Disable OBS alarm
12 3
JWDT1: Watchdog Timer Output Option
Closed Pins Result
1-2 Reserved
2-3 System reset (Default)
1 2 3
JERP1: Deep Sleep S5
Closed Pins Result
1-2 Enabled
2-3 Disabled (Default)
Jumpers and Connectors
Closed Open
Jumpers and Connectors (Cont.)

3 PCA-6028 Startup Manual
The drivers for the PCA-6028 are located on the software
installation CD. Please click through the folder and follow
the screen instructions to install them.
Caution! The computer is supplied with a battery-powered
real-time clock circuit. There is a danger of
explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Discard
used batteries according to the manufacturer’s
instructions.
Declaration of Conformity
Board Layout
Software Installation
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
Figure 1: Board Layout: Jumper and Connector Locations
JFP1+JFP2
JFP3
SMBUS1
DIMMB1 SATA
1,2,3
USB8
LAN2
LAN1
VGA1
KMBS1
COM1
COM2
ATXF1
HDAUD1
DIMMA1
JERP1
JIR+JWDT+JOBS1
LANLED1
KMBS2
LPC1
DVI1
JSMB1
USB9
USB01 USB23
USB45
USB1011
JCASE1
JCASEOP_SW1
SPI_CN1 EXPCIE1
EXPCIE2
CPUFAN1
GPIO1
JCMOS1
ATX12V1 CPU1
mSATA