AEI Security & Communications CTVM300AWK User manual

Wired Monitoring System
CTVM300AWK
AEI Security & Communications Ltd
Pack Contents
1 x Wired Camera
1 x Cable
1 x Monitor
1 x PSU
User Guide
In the interests of product development,
cosmetic appearance & colour may differ.
1) 12VDC Power
2) Camera 1 Input
3) Camera 2 Input
4) Audio/Video Output
5) V-Hold Picture Control
6) Contrast Picture Control
7) Brightness Picture Control
1) 2-Way Conversation Switch
2) Camera Input Select
3) Mode Select (AUTO/MANUAL)
4) Camera Dwell Time
5) Volume
6) Power Switch (ON/OFF)
7) Audio Level Meter
1 2 3 12,3 45,6,7
IMPORTANT NOTICES
The monitor is NOT SUITABLE
FOR EXTERNAL USE.
Exposure to moisture may damage
this device, render it unsafe for use
and invalidate the 1 year warranty.
ALWAYS SWITCH OFF this
device prior to connecting to mains
power and when not in use.
SEE OVERLEAF FOR QUICK SET UP GUIDE
4 5 6
180607-6
7

Quick Set Up Guide
STEP 1
Position the camera in a suitable
location and fix using supplied
wall plugs and screws.
STEP 2
Connect the camera trailing lead
to the supplied extension cable.
STEP 3
Connect the extension cable and
PSU lead to the rear of the
monitor as shown above.
STEP 4
Plug the PSU into an available
mains socket and switch on.
ALWAYS ALIGN THE ARROWS WHEN
CONNECTING THE CABLE TO THE
MONITOR.
DO NOT TWIST.

STEP 5
Switch the monitor ON ensuring
that the green power indicator
lights up.
STEP 6
Select channel C1 (Switch
pressed in) and set the mode to
MANUAL (Switch out)
STEP 7
To hold a two-way conversation
with somebody, hold the TALK
button down to speak. Then,
release the button to listen.
WARNING
The supplied power supplies may get hot during extended periods of use. This is normal
and is NOT a hazard.
DO NOT COVER the power supply units
DO NOT COVER the ventilation on the top of the monitor.
CONNECTION
TO A VCR
In most cases it is possible to connect
your CTVM300AWK Monitor to a
domestic VCR to record your CCTV
footage.
NOTE: This requires the use of a
Phono to SCART lead - not supplied.
SCART IN/OUT AERIAL
IN
AERIAL
OUT
VCR
Monitor

PICTURE QUALITY NOTICE:
If you experience picture quality issues with this system please try the
following. In the event the problem cannot be solved, please contact the
customer care line on 0845 1667940 or visit http://www.aei.eu
SYMPTOM SOLUTION
Rolling/Unsteady Picture Adjust the V-HOLD control on the rear of the monitor
Too Bright/Dark Adjust the BRIGHTNESS control on the rear of the monitor
Unclear/’Grey’ Picture Adjust the CONTRAST control on the rear of the monitor
Expand your AEI
monitoring system!
You can add an additional camera to
this system for use anywhere around
your home. Please quote part
number CTVM300AWK
Please visit www.aei.eu or call 0845
1667940 for more information.
IMPORTANT INSTRUCTIONS
WHEN USING 2 CAMERAS.
To select a camera manually, use
the CAMERA button located on
the front of the monitor.
To set this monitor to scan
automatically between the cameras
select the AUTO mode and set
the camera dwell time on the
TIME adjustment.
Waste electrical products should not be disposed of
with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice
©2007 AEI Security & Communications Ltd. All rights reserved.
Registered in the UK 02831823. Registered office: 30-34 North Street, Hailsham BN27 1DW.
AEI Security & Communications Ltd
Weslake Industrial Park
Rye Harbour Road
Rye, East Sussex
TN31 7TE
United Kingdom