Aerial FREERIDE BIMINI User manual

FREERIDE BIMINI
INSTALLATION GUIDE
GUIDE#: BT-FRBIM-0011
INSTALLATION SUPPORT
CANVAS NOT SHOWN FOR CLARITY

GUIDE#: BT-FRBIM-0012
CANVAS
1x 1x 1x
2x
4x
1x
4x
1x 1x
2x
2x
Parts list

GUIDE#: BT-FRBIM-0013
eXPloded oVerVieW
canvas noT shown FoR claRITy

GUIDE#: BT-FRBIM-0014
steP 1
CLICK!

GUIDE#: BT-FRBIM-0015
steP 2
CANVAS
ZIPP!
FRaME Is UpsIDE Down
Install the canvas before mounting the frame to the tower.
Lay the canvas on a tarp then place the frame on top
but upsidedown. When done properly, the canvas
will be drum tight. It is recommended that you
have two people to complete this process.
Rolling the edges over with your fingers will help
get the zippers aligned. It's a little tricky at first, but
it will fit correctly and be very snug!

GUIDE#: BT-FRBIM-0016
CLICK!
ADJUST
steP 4
steP 3

GUIDE#: BT-FRBIM-0017
MEASURE WIDTH AT MOUNTING POINT
steP 6
steP 5
CLICK!
ADJUST
MATCH WIDTH AT
MOUNTING POINT

GUIDE#: BT-FRBIM-0018
RAISE / INSTALL
steP 7
steP 8
INSERT / RAISE / INSTALL

GUIDE#: BT-FRBIM-0019
STEP 9
ADJUST CLAMP POSITIONS TO TILT
Questions?
www.aerialwakeboarding.com