Aerpro FP9750 Guide

FP9750
BA- BF
SX-SY
INSTALL KIT
TO SUIT FALCON
& TERRITORY

Product and Install Information
2
If you would like to find more information on this product or download an up to date
digital copy of this manual, please visit the https://aerpro.com website and search
for your model or scan the QR code below.
https://aerpro.com/FP9750GK
https://aerpro.com/FP9750SK
https://aerpro.com/FP9750PB
An installation and setup video is also available on our site

3
1 x Double DIN facia kit
1 x Built-in HVAC and steering wheel control unit
1 x Main wiring harness
1 x Universal SWC patch lead
1 x Video in/out lead
1 x Mounting kit
4 x M6 Bolts
1 x User/Install manual
Inclusions

4

5
Interface Functions
NOTE: The Climate control buttons will not work without ignition power,
including Door Lock & In-Cabin Light
Front Demister
Fresh air is blown through the heater core and then ducted to and distributed over
the interior surface of the vehicles windshield
Rear Demister
The demister clears condensation from the rear back glass

6
Interface Functions
Air Circulation Mode
Changes between fresh air drawn in directly from the outside of the vehicle, or
recirculation where the air is drawn from inside the cabin

7
Interface Functions
Mode
Changes the vent positions for heating and cooling

8
Heating & Cooling Temperature
Press up to increase temperature, press down to decrease temperature. Left hand
side buttons adjust passenger side (Front & Rear). Right hand side buttons adjust
drivers side (Front & Rear) temperature settings
Interface Functions

Air conditioning On or Off
Press to turn the air conditioning On/Off or vice versa. This can be changed and
reversed in the setup menu. NOTE: Holding down the A/C button completely
turns the A/C heating and cooling system off on Dual Zone models
Fan Speed Adjustment
Pressing these will turn the fan speed up and down. NOTE: With the A/C on and
fan speed set to zero, there still will be a small amount of cold air pushed out
through the vents
9
Interface Functions

10
Interface Functions
Trip Computer
This displays information relating to Average speed, Average fuel use, Trip time
and remaining fuel in kilometres. Press and hold the trip computer button to reset
the average speed on dual zone models. Beep sound will confirm reset.
NOTE: Trip button only works when not in the climate control display or
settings menu
Auto Function
Press to automatically control the climate control to a specified temperature.
NOTE: This will only work on Dual Zone models

11
Interface Functions
Auto Function (Semi Auto)
Press to manually control the climate control to a desired temperature.
NOTE: This will only work on Dual Zone models
Press again to turn the climate control off

Auto Door Lock
Press to lock and unlock all doors in the vehicle
NOTE: The Climate control buttons will not work without ignition power,
including Door Lock & In-Cabin Light
Traction Control
Press to turn vehicles traction control on or off
NOTE: Only works on supported models prior to upgrade
Interior Light
Press to turn the vehicles factory interior light on or off
12
Interface Functions

13
Menu Functions
Configuration Menu
Press and hold the menu button for a few seconds to display the Configuration
Menu. Press menu button to enter into sub menus and again to change settings.
Press the Fan UP/DOWN buttons to navigate up and down between sub menus

Select Infoadapter settings/preferences to access (4 menus)
Retained Accessory Power
Controls what the headunit does after the vehicle is turned off. When Off is selected
the headunit will turn off when the key is taken out of the ignition. When ON is
selected the headunit will turn off when the key is taken out of the ignition and the
drivers door is opened
Climate Screen Timeout
Adjust the time it takes the Infoadapter screen to return to the Headunit Screen
A/C Panel Brightness
Used to adjust the brightness of the LED back light of the climate control buttons
Restore Factory Settings
Restore all factory settings to default
14
Menu Functions

Installer Menu
When in the configuration menu, press and hold the fan UP/DOWN buttons at the
same time to access the installer menu
Air Conditioner Type
Choose between a single or dual climate system. NOTE: Dual climate systems
can run as a single zone system. Changing between single and dual zone
type will change and auto correct the Invert AC Button setting. This can also
be manually changed
15
Menu Functions

Screen Size/ Position
Allows the user to change the Infoadapter screen to fit to your headunits display
Invert AC Button
This inverts the AC toggle. If you can still feel cold air coming out of your vents
when AC is off, change this option
Diagnostics
Information on system
Camera Connected
Turns the reverse camera function On or Off if a reverse camera is fitted
Menu Functions
16

BEFORE
AFTER
INSTALLATION

1. Panel Remover 2. Phillips Head Screwdriver
3. 8 mm Ratchet
7. Electrical Tape
6. Cable Ties
4. Side Cutters
Use the following tools to make dismantling the car and the installation of the new
facia easier. NOTE: Do not use power tools, only use the tools recommended
below and do not over tighten screws as they may damage the facia kit.
AFTER
Tools Needed
2-2
5. Small Pick

Lift the front of the panel then pull the panel up to completely remove
Centre Console Disassembly
2-3
Removing gear shift trim (Auto)
Shift the gear stick down to the “D” drive position

Repeat to remove the right side panel
Removing side trim
Undo the screw then lift up from the bottom and pull down from the top to remove
the left side panel
2-4
Side Panel Disassembly