Suzuki 990E0-54P56-010 User manual

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
1
Description: Front parking system Part number:
990E0-54P56-010
Applications: VITARA (LY) TSMLY…600001 - … LHD/RHD Fitting time: 1h
Beschreibung: ParkAssistent vorn Teile Nr:
990E0-54P56-010
Verwendung: VITARA (LY) TSMLY…600001 - … LHD/RHD Montagezeit: 1h
Désignation: Système d'aide au stationnement avant N° de code: 990E0-54P56-010
Utilisations: VITARA (LY) TSMLY…600001 - … LHD/RHD Temps
de montage:
1h
Descrizione: Sensori di parcheggio anteriori Numero di codice:
990E0-54P56-010
Applicazioni: VITARA (LY) TSMLY…600001 - … LHD/RHD Tempo
d’installazione:
1h
Descripción: Sensores de aparcamiento delanteros Código:
990E0-54P56-010
Aplicación: VITARA (LY) TSMLY…600001 - … LHD/RHD Tiempo de
instalación:
1h
INSTALLER AND USER INSTRUCTIONS
MANUALE DI INSTALLAZIONE ED USO
INSTALLATIONS-UND BEDIENUNGSANLEITUNG
MANUAL PARA INSTALADOR Y USUARIO
MANUEL INSTALLATEUR ET UTILISATEUR
GB
ΕΓΧΕΙΡΙ∆ΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ ΚΑΙ ΧΡΗΣΗΣ
FR
DE
IT
ES
TELEPÍTÉSI ÉS KEZELÉSI UTASÍTÁSOK
INSTRUKCJA MONTAŻU I OBSŁUGI
INSTALLERINGS- OG BRUGERVEJLEDNING
INSTRUCTIES VOOR DE INSTALLATEUR EN DE GEBRUIKER
ИНСТРУКЦИЯ ПО УСТАНОВКЕ ИЭКСПЛУАТАЦИИ
INSTALLASJONS- OG BRUKERVEILEDNING
NÁVOD NA INSTALACI A POUŽITÍ
ASENTAJAN JA KÄYTTÄJÄN OHJEET
ІНСТРУКЦІЯ ЗМОНТАЖУ ТА ЕКСПЛУАТАЦІЇ
NÁVOD NA INŠTALÁCIU A POUŽITIE
INSTALLATIONS- OCH ANVÄNDARINSTRUKTIONER
INSTRUCŢIUNI DE INSTALARE ŞI UTILIZARE
KORISNIČKI PRIRUČNIK S UPUTAMA ZA POSTAVLJANJE
KURUCU VE KULLANICI TALİMATLARI
NAVODILA ZA MONTAŽO IN UPORABO
INSTRUÇÕES PARA O INSTALADOR E UTILIZADOR

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
2
Περιγραφή: Εμπρόσθιοι αισθητήρες στάθμευσης αρ. κωδικού: 990E0-54P56-010
Εφαρμογές: VITARA (LY) TSMLY…600001 - … LHD/RHD Χρόνος
εγκατάστασης:
1h
Leírás:
ELSŐPARKOLÁSI ÉRZÉKELŐKCikkszám:
990E0-54P56-010
Alkalmazások: VITARA (LY) TSMLY…600001 - …LHD/RHD Összeszerelési
idő:
1h
Opis: PRZEDNIE CZUJNIKI PARKOWANIA Numer części: 990E0-54P56-010
Zastosowanie: VITARA (LY) TSMLY…600001 - …LHD/RHD Czas
montażu:
1h
Beskrivelse: FRONTMONTEREDE PARKERINGSFØLERE Reservedelnummer:
990E0-54P56-010
Anvendelsesområder: VITARA (LY) TSMLY…600001 - …LHD/RHD Montagetid:
1h
Beschrijving: PARKEERSENSOREN VOORZIJDE Onderdeelnummer:
990E0-54P56-010
Toepassingen: VITARA (LY) TSMLY…600001 - …LHD/RHD Montagetijd:
1h
Описание:
Система парковки передним ходом Номер детали: 990E0-54P56-010
Применяется: VITARA (LY) TSMLY…600001 - …LHD/RHD Время
настройки:
1h
Beskrivelse: Front parkeringssystem Delenr.: 990E0-54P56-010
Anvendelser: VITARA (LY) TSMLY…600001 - …LHD/RHD
Monteringstid:
1h
Popis:
Přední parkovací systém Číslo dílu: 990E0-54P56-010
Použití: VITARA (LY) TSMLY…600001 - …LHD/RHD Doba
montáže:
1h
Kuvaus: Etupysäköintijärjestelmä Osanumero:
990E0-54P56-010
Sovellukset: VITARA (LY) TSMLY…600001 - …LHD/RHD Asennusaika:
1h
Опис:
Система переднього паркування Номер деталі: 990E0-54P56-010
Застосування: VITARA (LY) TSMLY…600001 - …LHD/RHD Час монтажу:
1h
Popis: Predný parkovací asistent Číslo dielu:
990E0-54P56-010
Použitie: VITARA (LY) TSMLY…600001 - …LHD/RHD Doba montáže:
1h
Beskrivning: Parkeringssystem fram Reservdelsnummer:
990E0-54P56-010
Användningsområden: VITARA (LY) TSMLY…600001 - …LHD/RHD Monteringstid:
1h
Descriere: Sistem de parcare cu faţa Cod articol:
990E0-54P56-010
Aplicaţii: VITARA (LY) TSMLY…600001 - …LHD/RHD Timp
de montare:
1h
GR
HU
PL
DK
NL
RU
NO
CZ
FI
UA
SK
SE
RO

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
3
Opis: Sustav za pomoćpri parkiranju unaprijed Broj dijela: 990E0-54P56-010
Namijenjen za: VITARA (LY) TSMLY…600001 - …LHD/RHD Vrijeme potrebno
za postavljanje:
1h
Tanım: Ön park sistemi Parça numarası: 990E0-54P56-010
Uygulamalar: VITARA (LY) TSMLY…600001 - …LHD/RHD Montaj süresi:
1h
Opis: Prednji sistem za parkiranje Številka dela: 990E0-54P56-010
Aplikacija: VITARA (LY) TSMLY…600001 - …LHD/RHD Čas za
namestitev:
1h
Descrição: Sistema de estacionamento dianteiro Número
da peça: 990E0-54P56-010
Aplicações: VITARA (LY) TSMLY…600001 - …LHD/RHD Tempo de
instalação:
1h
e 8
03 0053
HR
TR
SL
PT

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
4
1. SET CONTENTS
3. BEFORE INSTALLATION
1. Before you start, park the vehicle on a level surface, pull the parking brake and remove ignition key from lock cylinder.
2. Be careful not to damage any vehicle part.
3. Make sure all the parts are included in the kit as shown in “Set Contents”.
CAUTION
Please read the present manual and follow its instructions carefully. The signal words WARNING, CAUTION and NOTE
have been used to emphasize special information: pay special attention to them.
WARNING Indicates a potentially hazardous situation which could result in death or injury.
CAUTION Indicates a potentially hazardous situation which could result in vehicle damage.
NOTE Indicates special information to make maintenance easier or instructions clearer.
CAUTION
Disconnect the negative pole of the battery before connecting any wire.
All connections must be soldered.
Installation and connections should be done by qualified personnel only.
2. TOOLS
Ø 22-26mm
PH2
1
2

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
5
- CAUTION -
PRINT PAGES 5 & 6 FOR YOUR CUSTOMER
WARNING
a. Remember to always look around the vehicle while parking.
b. The parking system is designed only as a parking aid, it should not be considered to replace care and
attentiveness while manoeuvring. Always check the environment and keep a slow speed to avoid unexpected
hazards.
c. In case of heavy rain or snow the parking system might give an audible alert even if no obstacles are present:
this does not necessarily indicate that the parking system is defective.
WARNING
Presence of human beings, animals or small obstacles (smaller than 35cm) or objects/materials with low reflectance,
might not be detected by the parking system.
4. SYSTEM OPERATION
Automatic activation of sensors (odometer signal)
The parking system is automatically activated when ignition is turned ON the LED lights up to confirm activation.
The sensors stay ON until the vehicle speed remains under approximately 15 km/h. When speed exceeds 15 km/h, the parking
aid is automatically disabled and the LED turns OFF.
To deactivate the sensors (ex. when in queue), press the button on the LED receptacle as follows:
Short-press (approx. 1 second) sensors are disabled until the button is pressed again.
Long-press (hold for approx. 5 seconds until you hear a beep) sensors remain disabled until ignition is turned OFF
and ON again.
Detection of obstacles is signalled by the buzzer with an audible proximity warning when driving forward. The beeping frequency
will warn the driver about the presence of any obstacle in front of the vehicle: the faster the beeping the closer the obstacle.
The buzzer emits a continuous tone when the vehicle is approx. 30-50cm from the obstacle (user selectable setting).
5. TROUBLESHOOTING GUIDE
5.1 LOW POWER SUPPLY SIGNAL
If, when the control unit is turned ON, the battery level is too low to guarantee the accuracy of the system, the buzzer will almost
immediately give out a deep warning tone for 5 sec. and the LED will start blinking rapidly. This will indicate that ALL the
sensors are inoperative because of the low power supply and the driver will know that he will have to do without them.
5.2 FAULTY SENSORS
If, when the control unit is turned ON, one of the sensors turns out to be inoperative or not connected, an audio signal will sound
for 3 sec.
If more than one sensor is inoperative, the number of the faulty sensors will be alternatively displayed on the main control unit.
SENSOR 1 => inoperative SENSOR 4 => inoperative
NOTE
One single faulty sensor alters the correct functioning of the whole parking system.
5.3 OTHERS
POSSIBLE CAUSE SOLUTION
Ice on sensors. Clean the sensors.
Back part of sensors in contact with frame. Create a separation between the sensors and the vehicle.
NOTE
In case of heavy rain or snow the parking system might give an audible alert even if no obstacles are present: this does not
necessarily indicate that the parking system is defective.
NOTE
If, once activation is confirmed, the buzzer keeps beeping and no obstacle is in front of the vehicle, the parking system is
defective: contact your SUZUKI dealer.

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
6
6. DETECTION ZONES
Detection zones are indicated as “F1” and “F2” and the detection zone closest to the obstacle “FC”. The stage-by-stage sound
alert will vary according to the detection zone.
The STOP zone is the minimum distance detected between an obstacle and the sensor. In this case the warning tone is solid.
ZONE DISTANCE
FC 35 cm
F1 60 cm
F2 85 cm
7. WARRANTY CONDITIONS
This product is guaranteed to be free from manufacturing defects for a period of 24 months from the purchase date validated by
the receipt or invoice (in compliance with Warranty Directive 1999/44/CE (L.D. N24 dated 02/02/2002); if these documents are
not available, warranty will start from the manufacturing date stated on and inside the product itself.
Warranty only covers the repairing or replacement of the parts showing manufacturing defects; direct labour, transport and any
other charges are excluded. The warranty does not apply in case of malfunctioning caused by: negligence, improper installation,
tampering and improper use of the system and its application is entirely at the manufacturer’s discretion. In case of any warranty
request please contact your SUZUKI dealer.
The above is the only guarantee prescription and the buyer shall not have the right to ask for cancellation of the contract,
compensation for damage and/or price reduction.
8. TECHNICAL SPECIFICATIONS
9. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE
The present device does not fall within the scope of Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) as specified in art. 2.1 of L.D. no. 151 of 25/07/2005.
Supply voltage 9 => 30 Vdc
Current consumption - system ON 200mA max.
Operating temperature range -30°C => +70°C
Ultrasonic frequency 40 kHz

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
7
10. PROGRAMMING
CAUTION
Only expert users should modify the settings to avoid malfunctions of the parking system.
The display will indicate:
FS: Factory Settings => Factory default adjustments.
CS: Custom Settings => User-chosen adjustments.
To enter in programming mode, proceed as follows:
Press one of the two buttons on the control unit and keep it pressed for at least 2 seconds:
the system will activate and enter in programming mode.
Press the LEFT button to go back to the previous parameter.
Press the RIGHT button to move up to the next parameter.
When the parameter you want to modify is displayed, press one of the buttons and keep it pressed
until the display starts to blink: at this point the parameter can be modified.
Press the LEFT button to decrease the parameter value.
Press the RIGHT button to increase the parameter value.
Press one of the two buttons on the control unit and keep it pressed for at least 2 seconds to register the value.
The display will stop blinking and the selected parameter will be displayed.
If no button is pressed within10 seconds, the system will exit the programming mode.
NOTE
To reset factory settings (FS), simultaneously press the 2 buttons on the control unit and keep them pressed for more than 2
seconds.

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
8
11. SETTING OF PARAMETERS
CAUTION
The system is factory configured, modify default settings only if strictly necessary!
Par. Parameters Selectable Settings Factory Settings
01 Volume of buzzer 0, 1, 2 (Ref.1) 2
02 Detection range - Central sensors 50 - 95 cm 90
03 Detection range - Outer sensors 50 - 95 cm 50
06 STOP zone - Central sensors 30 - 50 cm 50
07 STOP zone - Outer sensors 30 - 50 cm 30
11 Number of speed signal pulses 1 - 99 2
12 Delay of sensors deactivation 0 or
10 - 60 sec. (Ref.2) 00
15 Service display (testing) 0, 1, 3 (Ref.3) 0
16 Continuous detection - zones F1 and F2 0, 1 (Ref.4) 1
17 Sensitivity 1, 2, 3 (Ref.5) 1
Ref.1: 0 = OFF
1 = Low
2 = High
Ref.2: By setting “00” => the system is activated every time ignition is turned ON.
To disable => press the button on the LED receptacle.
To turn it back ON => press the same button again.
Ref.3: 0 = OFF
1 = Distance from closest obstacle.
3 = Vehicle approx. speed (km/h, refer to parameter 11 to program).
Ref.4: 0 = OFF
1 = ON
Ref.5: 1 = Low
2 = Medium
3 = High
12. TESTING
a. To enter in programming mode, press and hold for at least 2 seconds one of the two buttons on the control unit (4).
b. Select parameter “15” (see “Setting of parameters”).
c. Press and hold one of the two buttons and select the test: “1” to test sensors or “3” to detect speed.
d. Press and hold one of the two buttons; the display will show “--”.
e. Test the sensors; the system will indicate the actual distance.
f. Reset parameter to “00”.
g. When testing is completed, press and hold one of the two buttons until the previously selected parameter (15) is displayed.
h. The system will automatically exit programming mode 10 seconds after the button has been pressed.

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
9
13. INSTALLATION
OPTIONAL
CAUTION
Drill through the factory markings on the inside of the bumper with the following drill bits:
Central Sensors: 22mm
Outer Sensors: 26mm
C
REMOVE
BUMPER
A
B
OPTIONAL
22-26mm
Bum
p
er inside view

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
10
NOTE
Bracket 6: Snap the brackets in the holes from the OUTSIDE of the bumper.
NOTE
Bracket 7: Snap the brackets in the holes from the OUTSIDE of the bumper in the appropriate direction as illustrated below.
D
Front View Rear View
TOP
Bum
p
er inside view
E
Bum
p
er inside view

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
11
IMPORTANT
Sensor 1: shortest cable
Sensor 4: longest cable
41
32
CAUTION
Insert the sensors in brackets (6) and (7) in the appropriate direction as illustrated below.
NOTE
Check length of cables before proceeding with final positioning of accessories.
G
F
Bum
p
er inside view

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
12
CABLE ROUTING
NOTE
Route wiring through the door sill to the right front inner wheelhouse.
H Inside grommet:
21mm
Outer grommet:
18mm
RHS RHS Inner wheelhouse RHS
J
i
K
Use the supplied clips to hold the cables in place.

SUZUKI GENUINE ACCESSORIES
English_I-M 990E0-54P56-010 Rev00 03/09/2018
13
CONTROL UNIT - BUZZER and ON/OFF BUTTON WITH LED INDICATOR
NOTE
BUZZER and ON/OFF BUTTON with LED indicator can be positioned according to customer request. Make sure the button can be
readily seen and easily reached.
L RH side RH side