Aerus Air Scrubber User manual

READ MANUAL CAREFULLY FOR PROPER USE AND OPTIMAL OPERATION.
PORTABLE ELECTRONIC PURIFIER
®

2
PRODUCT OVERVIEW
Congratulations on your purchase! Your new Air Scrubber Mobile by Aerus®is designed to provide years of trouble-free, low
maintenance operation. Be sure to read and follow all service procedures outlined in this owner’s manual, and use only genuine
Aerus replacement parts.
If your unit fails to operate properly after performing troubleshooting, contact your Independent
HVAC Contractor for further assistance. You may also contact Customer Service at 866.736.0503,
or [e-mail] for additional support.
CONTENTS
Product Overview . . . . . . . . . . . . . . . . . . . 2
Specications . . . . . . . . . . . . . . . . . . . . . 2
Storage & Disposal . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . 3
For Canadian Customers Only . . . . . . . . . . . . . 4
Parts & Accessories . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . 6
Mounting the Base . . . . . . . . . . . . . . . . . . . 7
Adjusting the Wire Stand . . . . . . . . . . . . . . . . 7
Wire Stand Positions . . . . . . . . . . . . . . . . . . 8
12 Volt DC Car Adapter . . . . . . . . . . . . . . . . . 8
Power Adapters . . . . . . . . . . . . . . . . . . . . 8
Portability . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance. . . . . . . . . . . . . . . . . . . . . . 10
Cleaning the Unit. . . . . . . . . . . . . . . . . . . . 10
Removing the Activepure®Bulb Assembly . . . . . . . . 10
Installing the Activepure®Bulb Assembly . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . 13
Replacement Parts & Service . . . . . . . . . . . . . . 14
Warranty Information . . . . . . . . . . . . . . . . . 15
FCC Declaration & Responsible Party . . . . . . . . . . 16
GENERAL INFORMATION
Aerus Enterprise Solutions, LLC reserves the right to change or
modify any specication without notice.
SPECIFICATIONS
Air Scrubber Mobile by Aerus
• Model Number: A1018C
• Sales Number: 00709
Technology:
• ActivePure®
Electrical:
• 12VDC or 110 - 240 VAC
• 50/60Hz with adapter
• Power Usage: 12 Volts, 10.7 Watts Max
• Conforms to UL STD 867
Mechanical:
• Fuse: 2 Amp Buss type (12VDC adapter only)
• 3 Speed Fan
Weight & Dimensions:
• 8 ounces (0.23 kg)
• 3.625” W x 6” H x 1.0” D (9.21cm x 15.25cm x 2.54cm)
(w/o base)
Operating Temperature:
• 45°F – 100°F (7°C – 38°C)
Recommended Maximum Coverage
in a Contiguous Space1:
• Up to 50 sq. ft. (4.6m²) for single occupant use.
Not for use in medical or health care environments.
*Dependent on occupancy of the space
Warranty:
• Limited 1 year warranty
*Dependent upon product registration
1. Assumes 8 foot ceilings. Solutions should be customized based upon a variety of factors
including HVAC system capabilities and settings, air ows taking into account walls, air
pressure, and doors, ambient air temperatures and humidities, variable density, known
VOC concentrations, and other layers of protection.
FILL IN AND SAVE
Record information regarding your new Air Scrubber Mobile
by Aerus here. Retain for future reference.
Model No.
Serial No.
Date of Purchase
Aerus Independent Business Owner:
Name
Phone No.
Address
STORAGE AND DISPOSAL
Do not dispose of this product as household waste.
Electrical waste and electronic products should be
appropriately recycled as required by practices
established by your local authority.

3
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
• The unit must be disconnected from its power source before servicing, and should not have the
power reconnected unless the case is correctly and completely reassembled
• Use O3 Boost in accordance with directions found in this manual only
• Not for use on 12 volt positive ground or 24 volt vehicles; doing so may damage the product
CAUTION
• UV Lamp in operation
• Do not operate the Air Scrubber Mobile by Aerus®unless the case is completely and correctly
assembled; failure to comply may result in serious eye damage
• Do not operate unit near heat sources, open ame, or combustible vapors or gases
WARNING
Read this manual in its entirety before using your Air Scrubber Mobile by Aerus
Keep out of the reach of children.
• Disconnect power cord before servicing
• DO NOT immerse in water or other liquids
• DO NOT touch the control panel or plug with a wet hand
• DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or
fire, or damage the air cleaner
• To prevent a possible fire, DO NOT block the air intakes or exhaust in any manner; DO NOT use on soft surfaces, where
openings may become blocked
• To disconnect air cleaner, turn controls to OFF, then remove plug from outlet; pull firmly on the plug, DO NOT unplug by
pulling on the cord
• Always unplug the unit before moving or cleaning, or whenever the air cleaner is not in use
• DO NOT use outdoors or on wet surfaces
• DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit, doing so will void your warranty
• Connect to properly grounded outlets only
• To reduce the risk of electrical shock, do not change the plug in any way

4
FOR CANADIAN CUSTOMERS ONLY
AIR SCRUBBER MOBILE BY AERUS®
Sales No. : 00709
This UV device helps reduce the spread of viruses in the air.
Keep out of the reach of children.
Please read the label and owner's manual before using: www.airscrubberbyaerus.com/warranty
PRECAUTIONS:
WARNING: UV radiation emitted from this device. Unintended use of the device, or damage to the housing, may result in
exposure to ultraviolet radiation. Ultraviolet radiation may cause eye and skin irritation. Avoid exposing eyes and skin to
ultraviolet radiation.
FIRST AID INSTRUCTIONS: Please contact your healthcare provider in the event of injury caused by this device.
DIRECTIONS FOR USE:
Plug in either the 12 Volt DC car adapter or the AC adapter. Please see owner's manual for detailed instructions on using,
handling, storing and disposing of the device, and procedures to mitigate any associated risks.
The use of this device is a supplement to and not a substitute for standard infection control practices; users must continue to
follow all current infection control practices, including those related to the cleaning and disinfection of environmental surfaces.
FOR INQUIRIES CONTACT:
AERUS CANADA, INC.
Laird Business Park
3480 Laird Road, Units 2–5
Mississauga, Ontario, Canada, L5L 5Y4
W. Parrell, Manager
[phone]
[email protected]
Aerus Canada, Inc. is aliated with DBG Group Investments, LLC
1300 Valley Drive, Bristol, Virginia 24201

5
PARTS & ACCESSORIES
A. Wire Stand (9950153)
B. Base (9950154)
C. Knob/Clamp Pack (2) (9950155)
D. 12 Volt DC Adapter (9950157)
E. 2.0 AMP Fuse (9950162)
F. AC ADAPTER (9950158)
G. ActivePure®Bulb Assembly Service Kit (9950209)
C
C
C
C
G
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
G. SERVICE KIT 9950209
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
AIR SCRUBBER MOBILE BY AERUS SERVICE KIT
TARGET FRAME
ACTIVEPURE
®
TARGET
UV BULB
ORDER PART# 9950209
C
C
C
CG
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
G. SERVICE KIT 9950209
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
AIR SCRUBBER MOBILE BY AERUS SERVICE KIT
TARGET FRAME
ACTIVEPURE
®
TARGET
UV BULB
ORDER PART# 9950209
C
C
C
CG
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
G. SERVICE KIT 9950209
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
AIR SCRUBBER MOBILE BY AERUS SERVICE KIT
TARGET FRAME
ACTIVEPURE
®
TARGET
UV BULB
ORDER PART# 9950209
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
UV BULB
ACTIVEPURE TARGET
3-PIN CONNECTOR
G

6
OPERATION
1. If desired, mount the base in an appropriate location (see page 6).
2. Adjust the wire stand (see page 6).
3. Plug in either the 12 Volt DC car adapter or the AC adapter.
4. The Air Scrubber Mobile by Aerus®unit will come on when power is supplied to the unit.
5. Adjust the Purifier by pressing the Purifier UP and Purifier DOWN buttons. When the unit is off, all the LED lights will
also be off.
6. Set the O3Boost by pressing the O3Boost UP and O3Boost DOWN buttons. See the Settings chart (below) for proper
adjustments. When the O3Boost is set to off, the LEDs will also be off; the Purifier LED(s) will remain on.
DO NOT EXCEED RECOMMENDED SETTINGS.
LEDs
Setting Coverage
Low: Compact Car, Pickup
Med: Large Sedan, SUV, or Semi-Cab
High: RV/Motor Home or Houseboat
OFF: Purier o: ionization & fan may continue operating if desired.
CAUTION
• When running continuously for extended periods of time, it may be necessary to clean the
unit more frequently than normal; remove any dust from the outside as well as the inside the
unit to maintain optimal performance; a lack of cleaning/maintenance may lead to product
performance or life issues
• DO NOT place unit where it may be exposed to temperatures above 100°F as doing so may
cause the plastic to deform
PURIFIER
O
3
BOOST
®
LOW LOW
HIGH HIGH
MED MED
UP
PURIFIER
DOWN
PURIFIER
DOWN
BOOST
UP
BOOST

7
ORTHEN
ADJUSTING THE WIRE STAND
The wire stand on the Air Scrubber Mobile by Aerus allows for quick release from the base, provides a stand or hanger for the unit
independent of the base, and allows the unit to either stand or hang from the base depending on how the base is mounted.
To adjust the wire stand, loosen the two knobs on the sides of the unit approximately 1/2 turn. The unit may then be tilted up or
down to adjust the angle or moved on the wire stand to change the height. You can also remove and change the position of the
wire stand to accommodate several different mounting methods. To reinstall, simply align the two clamp collars and insert the wire
stand. Once the unit is adjusted, tighten both knobs to hold it in place.
MOUNTING THE BASE
The base for the Air Scrubber Mobile by Aerus®can be mounted using the included suction cups, Velcro, or screws,
depending on preference. When using suction cups or Velcro, be sure the surface is smooth and clean. Dirt, grease,
protectants, and other substances will affect performance and holding ability.
• Peel and stick one part
of the Velcro to the base,
then attach the other to
a clean, dry surface, or...
• Attach suction cups by
pressing and twisting
into the base, or...
• Screws may be used for
extra security and where
the other methods are
not appropriate.

8
12 VOLT DC CAR ADAPTER
Air Scrubber Mobile by Aerus®has an operating voltage range of 11 Volt DC to 14.6 Volt DC. If the voltage coming into the unit is
too high, the unit may blow the 12 Volt DC adapter fuse. This type of problem usually indicates something is wrong with a vehicle’s
electrical system. If the unit shuts down while using the 12 Volt DC automotive adapter and you are unsure of the cause, check the
adapter fuse. If the fuse is not blown, test the unit using the supplied AC adapter. Once the voltage problem (drained car battery,
electrical system problem, etc.) is corrected by a qualified service person, you will be able to resume using your Air Scrubber
Mobile by Aerus with the 12 Volt DC adapter.
• Sitting on a at surface
with or without the base
• Hanging over an edge
pointing down (laundry
hamper, garbage can, etc.)
• Sitting on a at surface without
the base
• On a vertical surface with the
base (wall mount, window, etc.)
• Hanging over an edge pointing
up (seat pocket in car)
NOTE: Unit can be used without attaching the base or wire stand.
WIRE STAND POSITIONS
POWER ADAPTERS
• Insert the car adapter into an
appropriate 12 Volt automotive type
power outlet.
To change the car adapter fuse, unscrew and remove the front
of the adapter. Replace with the same type and rating only:
2 amp Buss type fuse (service part #9950162).
12 Volt DC Adapter Fuse
Air Scrubber Mobile by Aerus®comes with both a 12 Volt DC car adapter and a 100 - 240 volt 50/60 Hz AC adapter with
interchangeable plugs.
CAUTION
Not for use on 12 Volt positive ground or 24 Volt vehicles. Doing so may damage the product.

9
NOTE: For proper operation using the 12 Volt car adapter, make sure the fit in the power outlet is snug. A loose fit may can
issues in unit operation or blown fuses.
THEN
• Insert the small adapter plug into the
opening located underneath at the
rear of the unit.
PRESS HERE
• Select and install the proper
international plug into the
AC adapter. Insert correctly
assembled adapter into a
standard electrical outlet.
NOTE: When installing one of the
interchangeable plugs, be sure to twist and
lock it into place. When removing a plug, press
the raised tab to release, then turn the plug
out the top.
PUSH
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
OR
POWER ADAPTERS (CONT.)
PORTABILITY
NOTE: If you prefer to remove the base and unit together, mount the base with Velcro or suction cups to a clean, dry surface.
Depending on how it is mounted, your Air Scrubber Mobile by Aerus®can be ready to take with you in just a few seconds.
• Once the unit is assembled and
the base mounted, simply snap
the wire stand into the base.
The latch at the front of the
base should snap into place,
locking in the stand and unit.
• To remove the unit from an
attached base, press down
on the front latch and slide
the unit back, then up.
PRESS
SLIDE THEN LIFT
• For added convenience,
mount extra bases where you
use your unit most. See your
Aerus Independent Business
Owner for more information.

10
MAINTENANCE
A service kit is available for your Air Scrubber Mobile by Aerus. The kit contains a new ActivePure®Target, UV bulb, and ActivePure®
Purification Plate. For optimum performance, we recommend replacing these components annually. See your Independent HVAC
Contractor for more information.
Depending on conditions, your Air Scrubber Mobile by Aerus®will require periodic cleaning of certain internal components every
one to three months.
ActivePure®Target
Clean the target by gently removing dust with a small, soft brush.
UV Bulb
The UV bulb should be gently wiped with a soft, dry cloth. Avoid handling the UV Bulb more than necessary.
ActivePure®Ozone Plate
The top area of the ActivePure®Purification Plate can be cleaned with ammonia or alcohol and a cotton swab. Do not use water.
Allow to dry thoroughly.
Case
Clean the exterior of your Aerus Fresh Air Mobile with a soft cloth dampened (not wet) with water.
Do not use harsh chemicals or solvents.
Fan / Interior of Unit
The interior and fan may be cleared of dust using canned air suitable for electronics.
NOTE: See Installing the Activepure®Bulb Assembly on page 12 for detailed views of components.
CLEANING THE UNIT
CAUTION
The unit must be disconnected from its power source before servicing, and should not have the
power reconnected unless the case is correctly and completely reassembled.
REMOVING THE ACTIVEPURE®BULB ASSEMBLY
For maintenance and replacement of service kit 9950209
The unit must be disconnected from its power source before servicing, and should not have the
power reconnected unless the case is correctly and completely reassembled.
CAUTION
All user maintainable parts of the Air Scrubber Mobile by Aerus®are accessed by removing the lower half of the case.

11
REMOVING THE ACTIVEPURE®BULB ASSEMBLY (CONT.)
1. Turn unit over, tilt up slightly, and
remove screws at the front of the unit.
2. With the front remaining tilted up,
slide the lower half of the case
back and up until it is free.
3. Lift the small circuit board holding
the target screen and bulb (Bulb
Assembly) from the two tabs.
4. Disconnect the leads of the Bulb
Assembly from the main circuit board.
5. Remove the Bulb Assembly from the unit.

12
The Air Scrubber Mobile by Aerus® unit must be turned o and disconnected from power
before servicing, and should not be powered back on until the case is correctly and completely
reassembled.
CAUTION
INSTALLING THE ACTIVEPURE®BULB ASSEMBLY
3-PIN CONNECTOR
CIRCUIT
BOARD
a
b
c
d
TABS
ACTIVEPURE
TARGET FRAMES
C
C
C
C
A
B
D
E
A. WIRE STAND 9950153
B. BASE 9950154
C. KNOB/CLAMP PACK (2) 9950155
D. 12VDC ADAPTER 9950157
E. 2.0 AMP FUSE 9950162
F. AC ADAPTER 9950158
Fuse for 12VDC Adapter only
L
O
C
K
O
P
E
N
L
O
C
K
O
P
E
N
PUSH
F
UV BULB
ACTIVEPURE TARGET
Reinstallation is the reverse of the steps illustrated on page 7.
1. UV Lamp — Do not touch with bare hands. If touched,
clean the bulb with a cotton swab and a small amount
of isopropyl alcohol.
2. Attach the 3-pin connector of the ActivePure Bulb
Assembly to the main unit circuit board.
3. Carefully align the two holes in the ActivePure Bulb
Assembly to the two tabs on the main unit.
4. Press gently to install the ActivePure Bulb Assembly.
5. Carefully replace the bottom case, being sure the pins
inside the the back of the bottom case t into the two
standos at the back of the top case.
6. Slide the bottom case forward then down, making sure
the wires are completely inside the case.
7. Check for proper alignment the before installing and
tightening the screws.
NOTE: Failure to correctly assemble may cause damage
to the case.
8. Replace cover and two screws.

13
TROUBLESHOOTING
Under no circumstances should your Air Scrubber Mobile by Aerus® unit be operated while any
part of the case is damaged, missing, or disassembled. If the case is damaged, return your
unit to Aerus for repair or replacement. Direct exposure to the internal UV light may cause eye
damage.
WARNING
Troubleshooting — What To Look For First
1. Unit does not operate/the O3Boost does not operate/all LEDs off
• Unplug and reinsert the adapter plug and adapter to check where the power supply is plugged in to be sure it
has power.
• If using the 12 Volt DC car adapter, remove the fuse by unscrewing the end of the adapter and check to see if it is blown.
Replace it with the same type and rating fuse only (See Specifications on page 2). If the fuse is not blown, check the outlet
for proper voltage.
2. UV bulb or O3 Boost may not be working
• Press the PURIFIER UP or PURIFIER DOWN buttons to turn the Purifier function ON.
• If checking O3Boost operation, press the O3Boost UP button to turn the O3Boost ON
• Remove the Bulb Assembly, clean, and reinstall (see diagram on Page 4).
• If cleaning and reinstalling does not correct the problem, replace the Bulb Assembly (service kit #9950209).
• When looking through the rear inlet vents in low light you should see a slight bluish glow. If there is no glow, replace the
Bulb Assembly (service kit #9950209).
3. Lack of air flow:
• Make sure the intake vents are not blocked and the front of the unit is clear.
• Check to see if the fan is operating (if not, see above).
If your unit fails to operate properly after performing troubleshooting, contact your Independent
HVAC Contractor for further assistance. You may also contact Customer Service at 866.736.0503,
or [e-mail] for additional support.

14
REPLACEMENT PARTS (QTY) PART NUMBER
2.0 AMP Fuse 9950162
12 Volt DC Adapter 9950157
AC ADAPTER 9950158
ActivePure®Bulb Assembly Service Kit 9950209
Base 9950154
Knob/Clamp Pack (2) 9950155
Wire Stand 9950153
If your unit fails to operate properly after performing troubleshooting, contact your Independent
HVAC Contractor for further assistance. You may also contact Customer Service at 866.736.0503,
or [e-mail] for additional support.
REPLACEMENT PARTS & SERVICE

15
WARRANTY INFORMATION
LIMITED 1 YEAR WARRANTY
Customer should not repackage and ship the Air Scrubber
Mobile by Aerus unit due to possibility of irreparable damage.
For warranty service, please contact your Independent HVAC
Contractor or call Customer Service at 866.736.0503.
WHAT IS COVERED BY THIS WARRANTY
We warrant the Air Scrubber Mobile by Aerus to the
consumer, subject to the conditions below, against defects
in workmanship or material, provided that the products are
returned to a service location within the following time periods:
• Air Scrubber Mobile by Aerus within one (1) year of date of
purchase.
INSTALLATION AND MAINTENANCE REQUIREMENTS
This warranty is expressly conditioned upon proper installation,
operation, cleaning and maintenance, all in accordance with
the User’s Manual. Failure to meet any of these requirements
will void this warranty. Servicing of your Air Scrubber Mobile
by Aerus by parties other than our authorized representative
and/or using parts other than genuine parts will also void this
warranty.
HOW TO OBTAIN WARRANTY SERVICE
Customer must contact Customer Service or your Independent
HVAC Contractor and provide proof of purchase within the
above time period. We will repair or replace and return the
product, without charge and within a reasonable period of
time, subject to the conditions in the above paragraphs, if
its examination shall disclose any part to be defective in
workmanship or material. If we, in our discretion, are unable
to repair the product after a reasonable number of attempts,
we will provide either a refund of the purchase price or a
replacement unit, at the company’s option.
WHAT IS NOT COVERED BY THIS WARRANTY
This product is intended for household use only. Ordinary wear
and tear shall not be considered a defect in workmanship or
material. These warranties do not apply to lters nor for loss
or damage caused by accident, re, abuse, misuse, improper
installation, modication, misapplication, commercial use, or
by any repairs other than those provided by our authorized
Service Center.
MISSING SERIAL NUMBERS AND UNAUTHORIZED CHANNELS
If a valid serial number is missing from the product, the
warranty will be voided. Our products are authorized for sale
through our Independent HVAC Contractors only. Warranties
are voided if a product is purchased through unauthorized
channels, this includes websites that are not authorized to use
our trademarked names, images and logos as well as Internet
auction sites (e.g. ebay and Craigslist). The only approved
Internet presence for our products is www.airscrubberbyaerus.
com. To conrm warranty coverage prior to purchasing a
product, contact Customer Service at 866.736.0503 with the
serial number located on the back of the unit.
EXCLUSION OF OTHER WARRANTIES AND CONDITIONS
EXCEPT AS PROVIDED HEREIN, WE MAKE NO
REPRESENTATION OR WARRANTY OF ANY KIND. ALL OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARE
HEREBY EXPRESSLY DISCLAIMED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
LIMITATION OF LIABILITY FOR SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES
WE SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
FROM BREACH OF EXPRESSED OR IMPLIED WARRANTIES,
CONDITIONS, GUARANTEES OR REPRESENTATIONS, BREACH
OF CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY.
Such excluded damages include, but are not limited to, loss of
prots or revenue, and loss of the use of the products.
FOR U.S. APPLICATION ONLY
This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state. Some
states do not allow limitations on warranties, or on remedies
for breach. In such states, the above limitations may not apply
to you.
This warranty is provided by
DBG Investments, LLC
1300 Valley Drive
Bristol, VA 24201.
SERVICE
Every eort is made to ensure customers receive an up-to-
date instructions manual on the use of our products; however,
from time to time, modications to our products may without
notice make the information contained herein subject to
alteration. For the latest information, please contact Customer
Service at 866.736.0503 or [e-mail]
Limited One (1) Year Warranty
To register your Air Scrubber Mobile by Aerus®unit, visit www.airscrubberbyaerus.com/warranty.

16
FCC Declaration of Conformity
Name: Air Scrubber Mobile by Aerus®
Model: A1018C
Produced by: DBG Group Investments, LLC
This device complies with Part 15 of the FCC Rules.
Responsible Party
DBG Group Investments, LLC
1300 Valley Drive
Bristol, VA 24201
Ph: 866.736.0505
Signature:
Printed Name: Andrew Eide
Title: Vice President of Product Development
and Manufacturing
Date: 01/13/22
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant of part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the Independent Business Owner for help.
FCC DECLARATION & RESPONSIBLE PARTY

17
ASM_OM_65-00698_VA-01205B
Assembled in P.R.C. | © 2022 Aerus Enterprise Solutions, LLC. All Rights Reserved
For information regarding the use of this product please call Customer Service.
866.736.0503
[e-mail]
Aerus Enterprise Solutions, LLC | 1300 Valley Drive | Bristol, VA 24201 | 866.736.0503