AFi HBFB-CYN User manual

ASSEMBLY INSTRUCTIONS
Before assembling your bed, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
Congratulations!
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
BED WITH MATCHING FOOTBOARD
Instructions apply for bed sizes
TWIN
PARTS LIST HARDWARE
HEADBOARD PANEL 1 PC
1
2
3
4
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
FOOTBOARD
Allen wrench - 1pc
Spare - 1pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 40mm (1 1/2”) - 6 pcs
Spare - 1 pc
B
C
AWooden dowel - 4 pcs
Spare - 1 pc
Adult assembly
Page 1 of 2
Step 1
Attach the legs (2) and (3) to headboard panel (1),
using wooden dowels (A) and JCB (B).
Tighten with the Allen wrench (C).
Adult assembly
1
2
3
A
A
B
B
B
B
B
B
A
A
PO:
CODE ITEM
HBFB-CYN R-29572X

Page 2 of 2
01
02
03
04
05
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
SLAT KIT
BOX 1
04
04 04
02
03
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
Step 1
Adult assembly
Adult assembly
Step 2
BOX 2
Attach slat kit (05) onto the bed. For assembly of slat kit, follow the assembly instructions
included with bed frame.
05
05
UPPER
LOWER
Use the upper set of pins when
using mattress only, storage drawers
or Trundle bed. Use the lower set of
pins if using foundation and mattress.

ASSEMBLY INSTRUCTION
( TWIN )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
Step 1
Please note that you will require a Phillips screwdriver.
Assemble bed frame or bunk bed according to assembly instructions.
SLAT KIT 1 SET
01
A
Page 1 of 1
HARDWARE
1 1/4” Wood screw - 28 pcs Spare - 2 pcs
Lay the slat kit onto the bed.
PLATFORM BED
BUNK BED
Screw slat kit (01) to side rail, using wood screw (A).
Tighten with Phillips screwdriver. (Customer supplied)
Be sure the space between slats is even.
WEBBING MUST FACE UP
WEBBING MUST FACE UP
NOTE: WEBBING MUST FACE UP
SLAT KIT
A
Wood screw
Be sure to align slat kit evenly with both
ends of side rail.
01
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
READY
ASSEMBLE
TO
Step 2 A
A
A
01
01
PO :
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
CODE ITEM
SL-PF E-65000

Adult assembly
READY
ASSEMBLY INSTRUCTIONS
Before assembling your Trundle bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
TRUNDLE BED
Page 1 of 3
HARDWARE
A
C
JCB M6 X 1 5/8”( 40mm ) - 17 pcs
Spare - 2 pcs
JCB M6 X 5/8”( 15mm ) - 6 pcs
Spare - 2 pcs
Fix L bracket to front panel
B
D
L Bracket - 3 pcs
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PO :
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
CODE ITEM
ST-TD-UBN E-6710X

PARTS LIST
01
02
03
04
HARDWARE 1 BOX 2 PCS
1 PC
2 SET
1 PC
1 PC
1 PC
FRONT PANEL
FRONT RAIL
BACK RAIL
05
06
07
SIDE CROSS RAIL
CENTER CROSS RAIL
SLAT KIT
01
03
03
04
04
05
05
05
07
07
06
06
05
Attach the side cross rails (05) and center cross rail (06) to the front and back rail (03)(04), using
L bracket (C), JCB M6 X 1 5/8”(A). Tighten with the Allen wrench (D).
02
Page 2 of 3
A
A
C
C
C
A
A
A
A
D
Allen wrench
A
C
L Bracket
JCB M6 X 1 5/8”
Step 1
Adult assembly
C

Attach the front panel (02) to the front rail as shown, using JCB M6 X 5/8” (B).
Tighten with the Allen wrench (D).
Lay the slat kit (07) onto the rail assembly as shown, using JCB M6 X 1 5/8” (A).
Tighten with the Allen wrench (D).
Page 3 of 3
02
07
07
B
A
A
A
A
A
A
A
A
B
B
Step 2
Step 3
D
Allen wrench
B
JCB M6 X 5/8”
Adult assembly
D
Allen wrench
A
JCB M6 X 1 5/8”
Adult assembly
Congratulations!
Your Trundle bed is now ready for use.
We recommend that you periodically check that all screws are tight
and all parts are secure to ensure lasting safety.