AFX MOTORSPORTS Polaris XP Turbo S 2 Seater User manual

* For safety tighten all the screws.
Remove the four original screws of the roof, as it is shown in
the image and keep with you.
Remove Original screws
Remove Original screws
perforations. Use four original screws removed previously (as it
shown in the image). Original Screw
Original Screw
INSTALLATION MANUAL
ROOF RACK
Polaris XP Turbo S 2 Seater
CAN012
4
5
[email protected]
THIS PRODUCT IS FOR OFF ROAD USE ONLY

SPORT ROOF RACK
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
HOW TO INSTALL
Pieces included:
AFX
Motorsports
products
are
designed
to
best
fit
user’s
ATV/UTV
under
stock
conditions.
Adding,
modifying,
or
fabricating
any
factory
or
aftermarket
parts
will
void
any
warranty
provided
by
AFX
Motorsports
and
is
not
recommended.
AFX
Motorsports
products
could
interfere
with
other
aftermarket
accessories.
If
user
has
aftermarket
products
on
machine,
contact
AFX
Motorsports
to
verify
that
they
will
work
together.
Although
AFX
Motorsports
has
thousands
of
satisfied
customers,
user
should
be
aware
that
installing
bumpers,
rock
sliders,
spare
tire
carriers,
etc.
will
change
the
ride
of
machine
and
may
increase
maintenance
and
part
wear.
Operating
any
off-road
machine
while,
or
after,
consuming
alcohol
and/or
drugs
increases
risk
of
bodily
harm
or
death.
No
warranty
or
representation
is
made
as
to
this
product’s
ability
to
protect
user
from
severe
injury
or
death.
AFX
Motorsports
urges
operators
and
occupants
to
wear
a
helmet
and
appropriate
riding
gear
at
all
times.
By
purchasing
and
installing
AFX
Motorsports
products,
user
agrees
that
should
damages
occur,
AFX
Motorsports
will
not
be
held
responsible
for
loss
of
time,
use,
labor
fees,
replacement
parts,
or
freight
charges.
AFX
Motorsports,
nor
any
3rd
party,
will
not
be
held
responsible
for
any
direct,
indirect,
incidental,
special,
or
consequential
damages
that
result
from
any
product
purchased
from
AFX
Motorsports.
The
total
liability
of
seller
to
user
for
all
damages,
losses,
and
causes
of
action,
if
any,
shall
not
exceed
the
total
purchase
price
paid
for
the
product
that
gave
rise
to
the
claim.
AFX
Motorsports
will
warranty
only
parts
provided
by
AFX
Motorsports.
Any
damage
or
problems
with
OEM
housings,
bearings,
seals,
or
other
manufacturers’
products
will
not
be
covered
by
AFX
Motorsports.
AFX
Motorsports
parts
and
products
are
not
warrantied
if
item
was
not
installed
properly, misused, or modified.
Liability Statement
Tools needed (Not included):
5/32” Allen Key.
7/16” Combination Wrench.
(2x) Tornilleria
(8x) 1/4” X 1/2” Bolts with nuts.
(16x) 3/16” x 1/2” Bolts with nuts.
Place the rear roof rack with the laterals (as it is shown in the
image). Use four 1/4x 1/2” screws with nut. (Do not tighten yet).
Rear Roof Rack
1/4 x 1/2” Screw
Laterals
Nuts
Place the front roof rack with the laterals (as it is shown in the
image). Use four 1/4 x 1/2” screws with nut (Do not tighten
yet).
1/4 x 1/2” Screw
Front Roof Rack Nuts
Central Bar
Align 4 central bars with the perforations (as it is shown in the
image). Use sixteen 3/16 x 1/2” screws with nut, inserting them
bottom-up and tighten all screws.
3/16 x 1/2” Screw
Front Roof Rack
Central Bar Rear Roof Rack
Front Roof Rack
Hardware: