Agilent Technologies 16702B User manual

© Copyright Agilent Technologies 2000
All Rights Reserved
Logic Analysis Systems
Publication Number 16700-97014
16allp01
Installation Guide
16700B
Measurement
Modules
16702B

16allp02
Contents
System Overview Agilent 16700B
System Overview Agilent 16702B
4
5
16522A
16517/18A
General Installations
16533/34A
16557D
16710/11/12A
16715-19A /50-52A
16720A
50
43
42
54
64
69
72
77
Mouse and Keyboard
Proper Cooling
Monitor Connection
Monitor Configuration 16700B
6
8
7
9
Changing Monitors
Printers
Software Installation
LAN
16701A/B Expander Frame
Probing
Self-Test
Specifications & Characteristics
Disaster Recovery
Saving System Settings
11
13
21
12
24
25
31
32
33
35
External Disk Drive 15
External Disk Drive & CD-ROM Drive 19
Reloading System Settings 36
Monitor Configuration 16702B 10
Multiframe 37
Proper Cleaning 40

4
Additional Connections
Keyboard
and
Mouse
Printer
and
Cable
Power Cable
16701A/B
Expander Frame
16allp04
Making Basic
Measurements
(If ordered)
Monitor
Monitor Cable
Monitor Power Cable
16700B Mainframe
Training Board and Training Kit
External Disk Drive and Cable
(Data Drive - Option 008)
(Boot Drive - Option 009)
16700B Overview

5
Additional Connections
Printer and
Cable
16702B
Mainframe
16701A/B Expander Frame
16allp05
Monitor
Monitor Cable and
Monitor Power Cable
(If ordered)
Making Basic
Measurements
Mouse and
Keyboard
Training Board and
Training Kit
16702B Overview
External Disk Drive and Cable
(Data Drive - Option 008)
(Boot Drive - Option 009)
Power Cable

To 16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
Keyboard
Mouse
6
16700B
or
16702B
16allp06
Mouse & Keyboard
for 16700B/ 16702B
The 16700B must have the system mouse and keyboard connected for the system to boot
up properly.
Once enabled on the LAN, the system can be operated remotely without a keyboard or
mouse.

To 16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
7
16700B
or
16702B
16allp07
If applicable, international versions of the power cables can be found in the accessories
box.
Monitor & Power Cable
(Optional for 16702B)
Monitor Connection
for 16700B /16702B

Power
Busy
8
Allow a minimum of 5 cm spacing between instruments for proper cooling.
16allp08
Power
Busy
>5cm
>5cm
>5cm
>5cm
16700B
Proper Cooling
for 16700B/ 16702B/ Measurement Modules
16702B

9
16allp09
Enter
Monitor power
(Cycling choices)
System power
1
If you ordered the optional monitor with your logic analyzer, the monitor resolution setting is pre-
configured for 1280 x 1024 at the factory.
If you already have a monitor and ordered your logic analysis system without the optional
monitor, you will need to configure your monitor. The display will change on the screen every
few seconds as the system cycles through the monitor resolution choices. Make the appropriate
selection when it appears.
(Your monitor)
16700B
3
2
Monitor choice.
Clear
Images
Monitor Configuration
for 16700B
Press ENTER to select the
monitor choice and "Y" to
confirm.

10
16allp10
Use this procedure if you wish to configure an optional monitor to an 16702B.
Enter
Press ENTER to select the
monitor choice and "Y" to
confirm.
Monitor power
1
System power
3
4
Immediately press the
TAB key about ten times.
TabTab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
(Cycling choices)
Monitor choice.
Clear
Images
Monitor Configuration
for 16702B
2

11
16allp11
Enter
Press ENTER to select the
monitor choice and "Y" to
confirm.
Monitor power
1
3
4
Immediately press the
TAB key about ten times.
Tab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
Tab
System power
216700B
16702B
(Different Monitor)
(Cycling choices)
Monitor choice.
Clear
Images
Changing Monitors
for 16700B/ 16702B

12
16allp12
Help 10Base-T /100Base-TX
16700B or 16702B
LAN
for 16700B/ 16702B
To16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
KeyboardKeyboard Mouse

To 16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
13
16allp13
(Your printer)
16700B or 16702B
Printers
for 16700B/ 16702B

14
16allp14
Printer Setup
Done
Done
(Your printer)
Refer to “ the
online help for networked printers.
Network Printer Setup” in
Printers
for 16700B/ 16702B

15
16allp34
Termination Plug
(68 pin)
Power Cable
(68 pin)
(50 pin)
External Disk Drive
Cable
To16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
Set the External Disk drive
address to 3 or 4.
Removable Drive
External Disk Drive
for 16700A/ 16700B/ 16702A/ 16702B
as External Data Drive (Option 008)
16700A/B or 16702A/B

16allp32
16
Monitor Power
(If applicable)
2
Disk Drive
Power System power
3
16700A
LogicAnalysis System
Power
Busy
16700A/B or 16702A/B
Data Drive
Done
Done
1
External Disk Drive
for 16700A/ 16700B/ 16702A/ 16702B
as External Data Drive (Option 008)
To power up the system.......
To power down the system.......
System power
1
16700A
LogicAnalysis System
Power
Busy
16700A/B or 16702A/B
2Monitor Power
(If applicable) Disk Drive
Power
3

17
16allp36
Termination Plug
(68 pin)
Power Cable
(68 pin)
(50 pin)
External Disk Drive
Cable
To16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
Set the External Disk Drive
address to 6.
Removable Drive
External Disk Drive
for 16700B/ 16702B
as Removable Boot Drive (Option 009)
16700B or 16702B

External Disk Drive
for 16700B/ 16702B
as Removable Boot Drive (Option 009)
16allp37
18
Monitor Power
(If applicable)
2
Disk Drive
Power System power
3
16700A
LogicAnalysis System
Power
Busy
16700B or 16702B
1
To power up the system.......
To power down the system.......
System power
1
16700A
LogicAnalysis System
Power
Busy
2Monitor Power
(If applicable) Disk Drive
Power
3
16700B or 16702B

19
16allp31
Termination Plug
External Disk Drive
SCSI Cable
External Hard Drive
SCSI Cable
(50 pin to 68 pin)
16700B or 16702B
To16701 Expansion FrameTo 16701 Expansion Frame
Target
Control
Target
Control
Keyboard Mouse
A CD-ROM drive and an external hard drive(s) may
be connected to the SCSI-II port at the same time.
CD-ROM Drive
1
(68 pin)
(50 pin)
(50 pin)
(50 pin)
External Disk Drive
(68 pin)
(68 pin)
(50 pin)
External Disk Drive & CD-ROM
for 16700B/ 16702B
A CD-ROM drive address
setting of 6 or 7 could damage
your hard drive. Set the CD-
ROM drive address to 2.
CAUTION

20
16allp33
Monitor Power
(If applicable) 3
CD-ROM Drive
Power
2
When a system is shipped, the factory installs the current operating system
and ordered processor support packages and tools.
Done
Done
1External Disk Drive
Power
System power
4
External Disk Drive & CD-ROM
for 16700B/ 16702B
16700B
16702B