AIDA UHD6G-X12L User manual

UHD6G-X12L

This symbol indicates that da
consisting a risk of electric
this unit.
Warning
PARTS INSIDE.
1.
2.
3.
4.
2
ngerous voltage
shock is present within
Precaution
This exclamation point symbol is intended to alert the
user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (OR BACK)NOUSER SERVICEABLE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could
cause fire, electrical shock, or damage to the product.
Incorrectly connecting the power supplyor replacing battery may cause explosion, fire, electric shock, or damage to
the product.
Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause excessive heat or fire.
Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
Warning

6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
6.
3
Please read this Operation Guide before installing and using the camera & retain this copy for your reference.
Do not place conductive objects (e.g. screw drivers, coins, metal items, etc.) or containers filled with water on top
of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power source
and contact the service center. Continued use in such a condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product
in any way.
When cleaning, do not spray waterdirectly ontoparts of the product. Doing so may cause fire or electric shock.
Always follow the instructions in the operations guide when applying power. Fire and equipment damage can occur
if power is applied incorrectly. For the correct power supply,refer to the specifications page.
Do not use camera if fumes, smoke or a strange odor is emitted from the camera, or if it seems not functional
correctly. Disconnect the power source immediately and consult with your supplier.
Do not use the camera in extreme environments where high temperatures or high humidity exists. Use the camera
under conditions where temperatures are between 32°F ~ 104°F, and humidity is below 90%.
If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field
generated may interfere with or distort the image.
Try to avoid fluorescent light reflections, unstable light conditions, direct pointing toward the sun. Use caution when
operating the camera in the vicinity of spotlights or other bright lights and light reflecting objects.
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
Precaution

4
UHD6G-X12L
BACKFRONT
Tripod
Mounting
Hole
POWER LED
OSD Controller
I/O Connector Cable
Line In
Mic In
RS-485
RS-485 +
RS-485 -
Power In
12VDC
SDI OUT
I/O: Power, OSD
RS-485, Audio
HDMI LED
HDMI OUT
SVC
D
R
L
U

5
FEATURES
• 4K UHD 1/1.7 Progressive Scan CMOS sensor capable of 4K (4092 x 2160)
captures sharp and vivid images even under very low light conditions.
• Powered by a back-illuminated pixel technology.
• Superior 4K 12X optical zoom.
• Advanced digital imaging processor provides vivid and detailed images by
utilizing Dynamic Range, Auto White Balance, and Noise Reduction.
communication.
• OSD control breakout cable with two audio inputs and RS-485 for remote
video without blurring.
• Superb motion-compensated temporal noise reduction filter for motion
• Dual video simultaneous out interfaces 6G-SDI & HDMI.
• Flawlessly relays multi-channel embedded audio via 6G-SDI & HDMI.
• Perfectly suited for broadcast, pro audio/video, and security.
• Conforming with SMPTE 292M, 424M, and 2081-10.
• Versatile, compact, and rugged design.

OSD MENU
1
2
3
U
LR
D
+
485
-
SEL
RIGHT
DOWN
UP
LEFT
Move the Cursor Up/Down to Choose Menu
To move from item to item in the menu, move the joystick
to the Up/Down.
Change the Value
To change the value of the selected item, move the joystick
to the Left/Right.
Shift to the Sub Menu of the Chosen Menu
To go into sub menu, press SEL key.
The menu items with alw
>ays have its sub menu.
6
MAIN MENU
WB CONTROL
IMAGE CONTROL
AE CONTROL
DAY / NIGHT
AUDIO
SPECIAL
SETUP
RESET
EXIT
>
>
>
>
>
>
>
>
*FOCUS CONTROL >

7
FOCUS CONTROL
AUTO
Auto mode automatically controls focus.
MANUAL
Focus control is done manually
ZOOM SPEED : 0 ~ 7
Zoom speed can be adjusted from this menu
FOCUS LIMIT :
10cm, 50cm, 1m, 2m, 3m, 5m, 10m
Focus speed can be adjusted from this menu
PUSH
Press SEL key to focus automatically from the current view.
FOCUS CONTROL
FOCUS MODE
PUSH
ZOOM SPEED
FOCUS LIMIT
AUTO
4
*
RETURN
50CM

8
WB CONTROL
MANUAL
Manual mode will adjust white balance manually.
BLUE : 0 ~ 100
Select blue gain within the range of 0 to 100
RED : 0 ~ 100
Select red gain within the range of 0 to 100
AWB
Auto white balance mode will adjust white balance within
3,000K ~ 8,000K temperature.
ATW
Auto trace white mode will adjust white balance within
1,900K ~ 11,000K temperature.
INDOOR
Indoor mode will adjust white balance to indoor lighting conditions.
OUTDOOR
Outdoor mode will adjust white balance to outdoor lighting conditions.
ONE PUSH
One push mode is used if AWB or ATW cannot produce the proper
white balance. Place a white paper in front of the camera when using the
one push mode to self adapt.
WB CONTROL
MODE
PUSH
BLUE
RED
RETURN
ATW
*

9
AE CONTROL
AUTO
Auto mode will adjust the exposure level automatically.
AGC MAX : OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
“AGC MAX” sets the maximum gain value to control the video noise
caused by Auto Gain Control.
SENS UP : OFF, x2 ~ x10
“SENS UP” mode controls the digital slow shutter to allow extra light
into the camera and adjust the picture quality.
AE BRIGHT : 0~20
Auto Exposure brightness level can be adjusted.
AE CONTROL
AE MODE
SHUTTER
AGC MAX
IRIS
AGC
SENS UP
AE BRIGHT
FLK CONTROL
RETURN
AUTO
OFF
OFF
7
*
13

10
AE CONTROL
SHUT FIX
SHUT FIX mode provides more detailed shutter speed option.
All other controls are tuned for the selected shutter speed.
SHUTTER : AUTO, 1/30 ~ 1/10,000
Shutter speed can be set.
AGC MAX : OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
“AGC MAX” sets the maximum gain value to control the video noise
caused by Auto Gain Control.
SENS UP : OFF, x2 ~ x10
“SENS UP” mode controls the digital slow shutter to allow extra light
into the camera and adjust the picture quality.
AE BRIGHT : 0~10
Auto Exposure brightness level can be adjusted.
AE CONTROL
AE MODE
SHUTTER
AGC MAX
IRIS
AGC
SENS UP
AE BRIGHT
FLK CONTROL
RETURN
AUTO
OFF
OFF
8
*
13

11
AE CONTROL
AGC FIX
AGC FIX mode provides more detailed gain option.
All other controls are tuned for the selected gain value.
AGC : AUTO, 0dB ~ 27dB, d2X ~ d9X
Gain level can be set.
AGC MAX : OFF, LOW, MIDDLE, HIGH, DMIN, DMID, DMAX
“AGC MAX” sets the maximum gain value to control the video noise
caused by Auto Gain Control.
AE BRIGHT : 0~10
Auto Exposure brightness level can be adjusted.
AE CONTROL
AE MODE
SHUTTER
AGC MAX
IRIS
AGC
SENS UP
AE BRIGHT
FLK CONTROL
RETURN
AUTO
OFF
OFF
8
*
13

12
AE CONTROL
IRIS SPEED : 0 ~ 5
Electronic Iris speed can be controlled. (DC Iris lens only)
LENS MODE : INDOOR, OUTDOOR, MANUAL
Lens setting will be optimized for the selected environment.
(DC Iris lens only)
FLK CONTROL : AUTO, ON, OFF
“FLK CONTROL” mode provides a proper image sensor frequency
AE CONTROL
AE MODE
SHUTTER
AGC MAX
IRIS
AGC
SENS UP
AE BRIGHT
FLK CONTROL
RETURN
AUTO
OFF
OFF
8
*
13

13
DAY & NIGHT
Adjust color or B&W setting from this menu.
DAY & NIGHT
MODE
NIGHT COLOR
COLOR BURST
DAY (COLOR)
*
RETURN
MODE : DAY(COLOR), NIGHT(B&W)
Set camera to either color mode or B&W mode.
NIGHT COLOR : ON, OFF
When “NIGHT COLOR” is turned ON, camera stays on color mode
even “NIGHT(B&W)” is selected from the MODE.
COLOR BURST : ON, OFF
Color burst signal ON or OFF can be set for CVBS signal.
(Not applicable)

*
14
MODE : OFF, LINE, MIC
Select the proper audio mode from this menu.
AUDIO LEVEL : -12db ~ 48dB
Audio level can be manually adjusted from this menu.
MIC ATTENUATOR : ON, OFF
Audio input attenuation can be controlled from this menu to
SAMPLE BITS : 16, 20, 24, 32
Audio sample bit rate can be adjusted from this menu.
AGC LIMIT : 0dB ~ 58dB
Audio gain level can be adjusted from this menu when
minimize the audio noise level.
MIC attenuation is enabled.
AUDIO
AUDIO
MODE OFF
AGC LIMIT
AUDIO LEVEL
MIC ATTENUATOR
SAMPLE BITS
RETURN
0 dB
OFF
24BITS

15
IMAGE CONTROL
Camera image control can be adjusted from EFFECT menu.
IMAGE CONTROL
LENS SHADING OFF
RETURN
DNR
GAMMA CORRECT
*DEFAULT
SATURATION
CONTRAST
BRIGHTNESS
HUE
EDGE ENHANCE
AUTO SATURATE
AUTO EDGE
BLACK LEVEL
5
MIDDLE
11
11
10
0
0
ON
LENS SHADING : ON, OFF
Optical vignetting issue can be corrected from this menu.
BLACK LEVEL : -64 ~ 64
Gamma level can be adjusted.
GAMMA CORRECT: DEFAULT, 0.4 ~ 1.0
Gamma level can be adjusted.
DNR
Camera noise level can be adjusted from this menu
DNR MODE : OFF, 2D, 3D, 2D+3D
Digital noise reduction can be applied from this menu.
DNR LEVEL : AUTO, LOW, MIDDLE, HIGH
Noise reduction level can be adjusted from this menu.
DNR APERTURE : 0 ~ 4
Motion artifacts tightness can be adjusted.
0=Most ghost artifact 4= Least ghost artifact.

16
IMAGE CONTROL
CONTRAST : 0 ~ 20
Contrast level can be adjusted.
BRIGHTNESS: 0 ~ 20
Brightness level can be adjusted.
SATURATION : 0 ~ 20
Saturation level can be adjusted.
HUE: 0 ~ 20
Hue level can be adjusted.
EDGE ENHANCE : 0 ~ 20
Image sharpness level can be adjusted.
AUTO SATURATE: OFF, LOW, MIDDLE, HIGH
Decrease saturation automatically when noisy scene is detected.
AUTO EDGE : ON, OFF
Decrease edge enhancement (sharpness) automatically when noisy
scene is detected.
DEFAULT
Set EFFECT menu to default value.
IMAGE CONTROL
LENS SHADING OFF
RETURN
DNR
*
SATURATION
CONTRAST
BRIGHTNESS
HUE
EDGE ENHANCE
AUTO SATURATE
AUTO EDGE
BLACK LEVEL
5
MIDDLE
11
11
10
0
0
ON
GAMMA CORRECT DEFAULT

17
SPECIAL
Camera special functions can be adjusted from SPECIAL menu.
SPECIAL
DZOOM
DEFOG
BACKLIGHT
BINNING
DEFECT PIXEL
DWDR
MOTION DETECT
DISP. FUNCTION
FLICKER DETECT
ON
*
PRIVACY
RETURN
OFF
OFF
OFF
ON
ON
D-ZOOM
ZOOM CONTROL
PIP
DEFAULT
PIP SIZE
PIP POSITION
DZOOM SAVE
>
>
>
>
>
>
*
RETURN
OFF
1/16
OFF
OFF
DZOOM : ON, OFF
Digital Zoom and PIP function can be enabled from this menu.
ZOOM CONTROL: RATIO, POSITION, RETURN
Adjust the digital zoom ratio and position.
Use LEFT / RIGHT button to adjust the ratio, then press select.
USE LEFT / RIGHT/ UP / DOWN button to adjust the image position,
then press select.
Press select to exit.
PIP : ON, OFF
Turn ON or OFF the PIP window.
PIP SIZE: : 1/16, 1/25
Change the size of PIP window.
PIP POSITION : POSITION, RETURN
Adjust the PIP window location.
USE LEFT / RIGHT/ UP / DOWN button to adjust the image position,
then press select.
Press select to exit.
DEFAULT
Set privacy zone to default value.

18
SPECIAL
0
*
DEFOG : ON, OFF,AUTO
“DEFOG” menu improves foggy image.
DWDR
Wide Dynamic range can be adjusted from the sub menu.
MOTION DETECT
Camera can detect a motion within the selected areas.
STRENGTH : 0 ~ 16
Change defog strength.
THRESHOLD : 0 ~ 3
Threshold value sets minimum sensitivity value for automatic defog
control. Higher value makes defog-on control reluctant.
AUTO LEVEL : LOW, MID, HIGH
Auto level value sets maximum strength value for automatic defog
DEFOG SETUP
STRENGTH
THRESHOLD
AUTO LEVEL
RETURN

19
SPECIAL
BACKLIGHT - HLM
AREA
AREA DISPLAY
SIZE/POSITION
ON
*
LEVEL
BLACK MASK
>
DEFAULT
RETURN
3
ON
BACKLIGHT - BLC
BLC
SIZE/POSITION
LEVEL
ON
*
DISPLAY
DEFAULT
RETURN
128
ON
SIZE/POSITION :
BACKLIGHT : OFF, BLC, HLM
Camera backlight compensation can be adjusted.
BLC : OFF, ON
BLC enables back light compensation.
SIZE, POSITION, RETURN
Adjust BLC area window size.
HLM : OFF, ON
HLM can be adjusted.
AREA DISPLAY : ON, OFF
HLM AREA DISPLAY can be turned ON or OFF.
SIZE/POSITION : SIZE, POSITION, RETURN
Adjust BLC area window size.
LEVEL : 0 ~ 20
Amount of masking area can be adjusted.
BLACK MASK : OFF, ON
Masking area highlight can be turned ON or OFF.
DEFAULT
Set HLM menu to default value.
Set BLC menu to default value.
DISPLAY : OFF, ON
BLC area display can be turned ON or OFF.
DEFAULT
LEVEL
Backlight level compensation level can be adjusted from this menu.
Higher level will compensate more from the selected area.

20
SPECIAL
BINNING : OFF, ON
Binning can be turned ON of OFF.
DEFECT PIXEL : OFF, ON, ON(FIXED), STATIC
Defective Pixel Correction feature can be operated.
It is turned ON by default and will run both dynamic and static DPC
function.
DEFECT PIXEL
STATIC PROGRESS
SDPC UPDATE
SDPC CLEAR
RETURN
PRESS OK
*PRESS OK
PRESS OK