Air Delights MICROBURST 9000 User manual

ENTER
ENTER
ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
Mode A:
Neutralizing
Intensity
Setting
*Mode B:
Actual
Time Set
*Mode C:
12 ON/12 OFF
Set Time to
Begin 12 HR
Operation
*Mode D:
Set Actual Day
Choose up to
2 days off during
the week
Factory
Settings
Display
Setting Flow Chart
ENTER
MODE
MODE
MODE
MODE
MODE
ADJUST
ADJUST
ADJUST
ADJUST ADJUST
ADJUST
ENTER
ENTER
ADJUST
ENTER
ENTER
Have Questions or Need Supplies?
Call Toll Free: 1-800-440-5556
or on the web:
www.airdelights.com
Odor Neutralizing Refill Life at
Intensity: Factory Settings:
HI 45 Days*
ME 90 Days*
*Actual refill life will vary depending on all options chosen.
Set real-time clock
within 10 minutes.
*Only change if you
want to use additional
program features.
7'
2.2m
TIME
REFILLDAY
ON
OFF
TO
AMPM
MODE
RESET
ADJUST
ENTER
TIME
REFILLDAY
ON
OFF
TO
AMPM
MODE
RESET
ADJUST
ENTER
TONE
ON/OFF
Distributeur LCD en aérosol Microburst 9000
Dispensador LCD en aerosol Microburst 9000
Remember this simple process:
1. Press to scroll thru options
2. Press to adjust choice in options
3. Press to enter choice into program
Repeat steps 1, 2 & 3 for each option available.
ENTER
MODE
ADJUST
Operation Instructions
• Open dispenser cover by pressing keyless lock.(H)
• Insert two“D”cell alkaline batteries. (I)
• Turn dispenser ON by pressing ON/OFFbutton. (E)
• Dispenser is factory set with AUDIO ON (dispenser
will function with audio signals reinforcing the
need to replace a refill and/or batteries). You may
deactivate the AUDIO by pressing the TONE button(D) (dispenser will function without
audio signals).
• The factory setting will be displayed on LCD display. (G)
If factory settings are satisfactory proceed to step 6.If you wish to change the
settings,follow Steps 1 - 5 below.
Step 1.Select Dispensing Level
• Press the MODE button (A) to select the level of dispensing.
• Press the ADJUST button (B) to
move between options:
ME (Medium) or HI (High)
• Press Enter (C) to save
selected setting.
• Display will show number
of days in refill cycle. (G)
Step 2.Set Time Clock
• Press MODE to set the time.
• Press ADJUST to adjust clock by increments of 10 min.
• Press ENTER once real time is shown.
Step 3.Select number of hours of operation
• Press ADJUST to choose 12 or 24 hour operation.
• Press ENTER to save selected setting.
• If you choose a 12 hour setting:
• Press ADJUST to set the start time of 12 hour period.
• Press ENTER once desired start time is shown.
• Display will show number of days in refill cycle.
Step 4.Set the day of the week
• Press MODE to set the day of the week.
• Press ADJUST to scroll through days.
• Press ENTER once actual day is shown.
Step 5.Select days of operation
• Press ADJUST to select if dispenser should be ON or OFF for the day shown on the display.
• Press ENTER to save setting.
NOTE:Dispenser operates a 5,6 or 7 day cycle.
Step 6.Refilling Dispenser
• Press the red RESET (J)button for up to 4 seconds. IMPORTANT:Do this every time a
refill is replaced. If reset button is pressed for 5 seconds,the dispenser will automatically
switch to“Demo”mode and revert to factory setting of 30 days.
• Insert refill and close cover.Do not stand directly in front of dispenser.
Step 7.Changing Batteries
• Dispenser will hold the display for 1 minute,allowing you to change the battery without
losing the setting.Battery life approximately 3 years.
• Visual battery monitor will flash when battery reaches last 30 days of life.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
ENTER
MODE
ADJUST
ENTER
ADJUST
Visual battery
Audio ON
Medium level of
dispensing,24 hours,
every day,with a
30 day refill cycle.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE
ADJUST ENTER
ENTER
ENTER
Finished
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE ADJUST ADJUST
ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST ENTER
11170 SW 5th Street
Beaverton, Oregon 97005
☎1-800-440-5556
Fax: [phone]
www.airdelights.com
LCD AEROSOL DISPENSER
STOCK #401218
TM/MD
TIME
REFILLDAY
ON
OFF
TO
AM PM
INSTALLATION INSTRUCTIONS
Wall Mounting
1. Dispenser should be positioned at a minimum
height of 7’(2.2m) for best results.
2.Position the Dispenser over a wall stud and secure
with supplied screws.
Montage sur le mur
1. Le dispensateur doit être positionné à une
hauteur de 7" (2.2 m) pour obtenir un
meilleur résultat.
2.Positionner le dispensateur sur l'appui du mur et
visser avec les vis fournies.
Montaje sobre la pared
1. El dispensador debe estar ubicado a una latura
mínima de 7" (2.2 m) para obtener un
mejor resultado.
2.Ubicar el dispensador sobre el montante de la
pared y atornillar con los tornillos provistos.
FULLYGUARANTEEDAGAINSTDEFECTS
INPARTSANDWORKMANSHIP
T
E
N
Y
E
A
R
W
A
R
R
A
N
T
Y
Remember to register for your
dispenser warranty on-line at:
http://www.technicalconcepts.com
Use of air neutralizers other than
TC™ refiils voids dispenser warranty.
ME =14 minute spray interval
HI = 7 minute spray interval

ENTER
ENTER
ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
Mode A:
Neutralizing
Intensity
Setting
*Mode B:
Actual
Time Set
*Mode C:
12 ON/12 OFF
Set Time to
Begin 12 HR
Operation
*Mode D:
Set Actual Day
Choose up to
2 days off during
the week
Factory
Settings
Display
Setting Flow Chart
ENTER
MODE
MODE
MODE
MODE
MODE
ADJUST
ADJUST
ADJUST
ADJUST ADJUST
ADJUST
ENTER
ENTER
ADJUST
ENTER
ENTER
Have Questions or Need Supplies?
Call Toll Free:1-800-440-5556
or on the web:
www.airdelights.com
Odor Neutralizing Refill Life at
Intensity: Factory Settings:
HI 45 Days*
ME 90 Days*
*Actual refill life will vary depending on all options chosen.
Set real-time clock
within 10 minutes.
*Only change if you
want to use additional
program features.
7'
2.2m
TIME
REFILLDAY
ON
OFF
TO
AMPM
MODE
RESET
ADJUST
ENTER
TIME
REFILLDAY
ON
OFF
TO
AMPM
MODE
RESET
ADJUST
ENTER
TONE
ON/OFF
Distributeur LCD en aérosol Microburst 9000
Dispensador LCD en aerosol Microburst 9000
Remember this simple process:
1. Press to scroll thru options
2. Press to adjust choice in options
3. Press to enter choice into program
Repeat steps 1,2 & 3 for each option available.
ENTER
MODE
ADJUST
Operation Instructions
• Open dispenser cover by pressing keyless lock. (H)
• Insert two“D”cell alkaline batteries.(I)
• Turn dispenser ON by pressing ON/OFF button.(E)
• Dispenser is factory set with AUDIO ON (dispenser
will function with audio signals reinforcing the
need to replace a refill and/or batteries).You may
deactivate the AUDIO by pressing the TONE button (D) (dispenser will function without
audio signals).
• The factory setting will be displayed on LCD display.(G)
If factory settings are satisfactory proceed to step 6.If you wish to change the
settings,follow Steps 1 - 5 below.
Step 1. Select Dispensing Level
• Press the MODE button (A) to select the level of dispensing.
• Press the ADJUST button (B) to
move between options:
ME (Medium) or HI (High)
• Press Enter (C) to save
selected setting.
• Display will show number
of days in refill cycle.(G)
Step 2. Set Time Clock
• Press MODE to set the time.
• Press ADJUST to adjust clock by increments of 10 min.
• Press ENTER once real time is shown.
Step 3. Select number of hours of operation
• Press ADJUST to choose 12 or 24 hour operation.
• Press ENTER to save selected setting.
• If you choose a 12 hour setting:
• Press ADJUST to set the start time of 12 hour period.
• Press ENTER once desired start time is shown.
• Display will show number of days in refill cycle.
Step 4. Set the day of the week
• Press MODE to set the day of the week.
• Press ADJUST to scroll through days.
• Press ENTER once actual day is shown.
Step 5. Select days of operation
• Press ADJUST to select if dispenser should be ON or OFF for the day shown on the display.
• Press ENTER to save setting.
NOTE:Dispenser operates a 5,6 or 7 day cycle.
Step 6. Refilling Dispenser
• Press the red RESET (J) button for up to 4 seconds.IMPORTANT:Do this every time a
refill is replaced.If reset button is pressed for 5 seconds, the dispenser will automatically
switch to“Demo”mode and revert to factory setting of 30 days.
• Insert refill and close cover. Do not stand directly in front of dispenser.
Step 7. Changing Batteries
• Dispenser will hold the display for 1 minute,allowing you to change the battery without
losing the setting.Battery life approximately 3 years.
• Visual battery monitor will flash when battery reaches last 30 days of life.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
ENTER
MODE
ADJUST
ENTER
ADJUST
Visual battery
Audio ON
Medium level of
dispensing, 24 hours,
every day,with a
30 day refill cycle.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE
ADJUST ENTER
ENTER
ENTER
Finished
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE ADJUST ADJUST
ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST ENTER
2595 South West 198th Ave.
Aloha, Oregon 97006
☎1-800-440-5556
Fax: [phone]
www.airdelights.com
LCD AEROSOL DISPENSER
STOCK #401218
TM/MD
TIME
REFILLDAY
ON
OFF
TO
AM PM
INSTALLATION INSTRUCTIONS
Wall Mounting
1. Dispenser should be positioned at a minimum
height of 7’(2.2m) for best results.
2. Position the Dispenser over a wall stud and secure
with supplied screws.
Montage sur le mur
1. Le dispensateur doit être positionné à une
hauteur de 7" (2.2 m) pour obtenir un
meilleur résultat.
2. Positionner le dispensateur sur l'appui du mur et
visser avec les vis fournies.
Montaje sobre la pared
1. El dispensador debe estar ubicado a una latura
mínima de 7" (2.2 m) para obtener un
mejor resultado.
2. Ubicar el dispensador sobre el montante de la
pared y atornillar con los tornillos provistos.
FULLY GUARANTEED AGAINST DEFECTS
IN PARTS AND WORKMANSHIP
T
E
N
Y
E
A
R
W
A
R
R
A
N
T
Y
Remember to register for your
dispenser warranty on-line at:
http://www.technicalconcepts.com
Use of air neutralizers other than
TC™ refiils voids dispenser warranty.
ME =14 minute spray interval
HI = 7 minute spray interval

F
I
C
H
A
B
G
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
ENTER
MODE
ADJUST
ENTER
ADJUST
Visual battery
Audio ON
Medium level of
dispensing, 24 hours,
every day,with a
30 day refill cycle.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE
ADJUST ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST ENTER
D
E
J
TIME
REFILLDAY
ON
OFF
TO
AM PM
Visual battery
Audio ON
Medium level of
dispensing, 24 hours,
every day,with a
30 day refill cycle.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE
ADJUST ENTER
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
ADJUST ENTER
ENTER
ENTER
Fin
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE ADJUST ADJUST
ENTER
ENTER
ENTER
Fin
ENTER
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIME
REFILLDAY
ON
OFF
TO
AM PM
MODE ADJUST ADJUST
ENTER
Mode d'emploi
• Ouvrir le couvercle du distributeur en appuyant sur
la fermeture sans clé (H).
• Installer deux piles alcalines de format "D".(I).
• Tourner le distributeur sur ON en appuyant sur le
bouton ON/OFF. (E)
• Le distributeur est réglé à la manufacture avec la
fonction AUDIO ON (le distributeur fonctionnera avec les
signaux sonores pour renforcer le besoin de remplacer la recharge de gel ou/et les piles).Vous pouvez
désactiver la fonction AUDIO en appuyant sur le bouton TONE (E) (le distributeur fonctionnera
sans les signaux sonores).
• Les réglages seront affichés sur l'affichage LED(G).
Si les réglages en usine vous conviennent,passer à l'étape
6. Sinon, suivre les étapes 1 à 5 ci-dessous.
Étape 1.Choisir le niveau de distribution
• Appuyer sur le bouton MODE (A) pour sélectionner le niveau
de distribution.
• Appuyer sur le bouton ADJUST (B) pour
se déplacer d'une option à l'autre
ME (Moyen),HI (Élevé).
• Appuyer sur ENTER (C) pour sauvegarder
les réglages sélectionnés.
• L'affichage indiquera le nombre de jours dans
le cycle de recharge.(G).
Étape 2.Régler l'horloge
• Appuyer sur MODE pour régler l'heure.
• Appuyer sur ADJUST pour régler l'horloge en
augmentant de 10 minutes à la fois.
• Appuyer sur ENTER lorsque l'heure réelle est affichée.
Étape 3.Sélectionner le nombre d'heures
de fonctionnement
• Appuyer sur ADJUST pour régler un fonctionnement
de 12 ou 24 heures.
• Appuyer sur ENTER pour sauvegarder le réglage sélectionné.
• Si vous choisissez un réglage de 12 heures:
• Appuyer sur ADJUST pour régler l'heure de départ de la
période de 12 heures.
• Appuyer sur ENTER lorsque l'heure de départ de la période de
12 heures est affichée.
• L'affichage indiquera le nombre de jours dans le cycle de recharge.
Étape 4.Régler le jour de la semaine
• Appuyer sur MODE pour régler le jour de la semaine.
• Appuyer sur ADJUST pour dérouler les jours.
• Appuyer sur ENTER lorsque le jour réel est affiché.
Étape 5.Sélectionner les jours de fonctionnement
• Appuyer sur ADJUST pour choisir si le distributeur devrait être en position de fonctionnement ON ou
d'arrêet OFF pour le jour affiché sur l'affichage.
• Appuyer sur ENTER pour sauvegarder le réglage.
REMARQUE :Le distributeur fonctionne sur un cycle de 5,6 ou 7 jours.
Étape 6.Recharge du distributeur
• Appuyer sur le bouton rouge RESET (J) pendant une durée de 4 secondes. IMPORTANT: Faire cela
chaque fois qu'une recharge est remplacée. Si vous appuyez sur le bouton de remise à zéro
pendant 5 secondes,le distributeur passera automatiquement au mode "Demo" et retournera au
réglage en usine de 30 jours.
• Placer la recharge et fermer le couvercle. Ne pas se tenir directement en face du distributeur.
Étape 7.Remplacement des piles
• Le distributeur maintiendra l'affichage pendant 1 minute pour vous donner le temps de changer les
piles sans perdre les réglages. Le durée d'utilisation des piles est d'environ 3 ans.
• Le voyant lumineux des piles clignotera lorsque les piles ont atteint les derniers 30 jours de
leur durée d'utilisation.
Modo de empleo
• Abrir la tapa del dispensador apretando la cerradura
sin llave.(H)
• Insertar dos pilas alcalinas "D".(I)
• Encender el dispensador apretando el botón ON/OFF.(E)
• El dispensador viene de fábrica con el AUDIO ON (el
dispensador va a funcionar con la señal de audio reforzando
la necesidad de reemplazar el repuesto de gel o las pilas).
Usted puede desactivar el AUDIO apretando el botón TONE (D) (el dispensador funcionará
sin la señal de audio).
• El ajuste de fábrica aparecerá en el indicador LCD.(G)
Si los ajustes de fábrica son satisfactorios proceder a la etapa 6.Si usted desea cambiar los ajustes,
siga las etapas 1 a 5 a continuación.
Etapa 1.Seleccionar el nivel de dispensación
• Apretar el botoon MODE (A) para seleccionar el nivel
de dispensación.
• Apretar el boton ADJUST (B) para moverse entre las opciones:
ME (medio),HI (alto).
• Apretar ENTER (C) para salvaguardar
el ajuste seleccionado.
• El indicador mostrará el numero de días
en el ciclo de recarga.(G)
Etapa 2.Ajustar el reloj
• Apretar MODE para ajustar la hora.
• Apretar ADJUST para ajustar el reloj en incrementos de
10 minutos.
• Apretar ENTER una vez que aparece la hora correcta.
Etapa 3.Seleccionar el numero de horas de funcionamiento.
• Apretar ADJUST para elegir 12 o 24 horas de funcionamieneto.
• Apretar ENTER para salvaguardar el ajuste seleccionado.
• Si usted selecciona 12 horas:
• Apretar ADJUST para fijar la hora de comienzo del período
de 12 horas.
• Apretar ENTER una vez que la hora deseada de comienzo
aparece en el indicador.
• El dispensador mostrará el numero de días en el ciclo de recarga.
Etapa 4.Fijar el día de la semana
• Apretar MODE para fijar el día de la semana.
• Apretar ADJUST para seleccionar el dÌa de la semana.
• Apretar ENTER una vez que aparece el día correcto.
Etapa 5.Seleccionar los días de funcionamiento
• Apretar ADJUST para seleccionar si el dispensador debe estar en ON u OFF para el día que
aparece en el indicador.
• Apretar ENTER para salvaguardar la selección.
NOTA:El dispensador funciona en ciclos de 5, 6 o 7 días.
Etapa 6.Recarga del dispensador
• Apretar el botón rojo RESET (J) durante 4 segundos.IMPORTANTE:Hacer esto cada vez que se cambie
la recarga.Si el botón RESET se aprieta por 5 segundos,el dispensador automáticamente cambiará a la
modalidad de "Demo" y retornará al ajuste de fábrica de 30 días.
• Insertar la recarga y cerrar la tapa.No pararse enfrente del dispensador.
Etapa 7.Cambio de pilas
• LEl dispensador mantendrá la indicación por 1 minuto,para permitirle el cambio de pilas sin perder los
ajustes.La pila dura aproximadamente 3 años.
• La imagen de la pila empezará a guiñar cuando a la pila le queden 30 días de vida.
TIME
REFILLDAY
ON
OFF
TO
AM PM
TIMETIME
REFILLDAY
ON
OFF
TO
AM PMAM PM
ENTER
MODE
ADJUST
ENTER
ADJUST
ME =intervalle de jet de 14 minutes
HI = intervalle de jet de 7 minutes ME =intervalo de vaporisación de 14 minutes
HI = intervalo de vaporisación de 7 minutes