AirLive IP-1000R Operating instructions

HOW to use TFTP to make the IP-1000R rework normally
1. Purpose: Some bugs might cause IP-1000R Status Led flashing irregularly,
and disallow user to configure its eb managed page. If so, user can use
“TFTP mode” to solve the issue.
2. Symptom: Status Led flashes abnormally.
a. Status Led flashes very fast
b. Status Led flashed irregularly.
P.S. User can check the router’s working status based on Status Led. If Status
Led flashes the light per second, it means router works normally.
3. Solution:
a. If IP-1000R DHCP server function is still working, then please go to step
c, otherwise please go to Step b.
b. Unplug power of router. Press and hold Reset button and then power on
the router till Status Led start flashing. hen Status Led is flashing
very fast, it indicates the router is at TFTP mode. If router’s led does
not flash quickly, please try again.
c. Run the firmware upgraded file and click “Refresh” button, it should
show you the information about router you connected. You can
download the latest version firmware from our website, and it also
contains a program to upgrade firmware.
d. If utility finds a device and displays “unreachable”, then you should
configure PC with fixed IP of same subnet address.
e. hen everything is fine, then you can click “Upgrade” button to
upgrade the firmware.

f. hen you upgrade firmware successfully, please press and hold the
reset button for 10 or more seconds to reset router as default setting.
If the upgrade process is failed, please try again the process from step
b.