AirLive 2.5GE XPON ONU User manual

Page I
AirLive 2.5GE XPON ONU
&
AirLive XPON ONU-1GE
USER MANUAL

Page II
Contents
Chapter 1 Product Introduction ............................................................................................. 1
1.1 Product Description...................................................................................................... 1
1.2 Special features............................................................................................................ 1
1.3 Technical Parameter.................................................................................................... 2
1.4 Application chart........................................................................................................... 3
1.5 Panel description.......................................................................................................... 3
Chapter 2 Quick Installation................................................................................................... 6
2.1 Standard Packing Contents........................................................................................ 6
2.2 Quick Installation.......................................................................................................... 6
Chapter 3 Configuration......................................................................................................... 8
3.1 Login............................................................................................................................... 8
3.2 Status............................................................................................................................. 9
3.2.1 Device Information................................................................................................... 9
3.2.2 Statistics.................................................................................................................. 10
3.2.3 Logout..................................................................................................................... 11
3.3 Setup............................................................................................................................ 11
3.3.1 WAN........................................................................................................................ 11
3.3.2 LAN ......................................................................................................................... 13
3.4 Advanced..................................................................................................................... 16
3.4.1 Route ...................................................................................................................... 16
3.4.2 NAT ......................................................................................................................... 17
3.4.3 QoS ......................................................................................................................... 19
3.4.4 CWMP..................................................................................................................... 20
3.4.5 VLAN Mapping........................................................................................................ 21
3.4.6 Others..................................................................................................................... 21
3.5 Service......................................................................................................................... 22
3.5.1 IGMP....................................................................................................................... 22

Page III
3.5.2 UPnP ....................................................................................................................... 23
3.6 Firewall......................................................................................................................... 23
3.6.1 MAC Filtering.......................................................................................................... 23
3.6.2 IP/Port Filtering ...................................................................................................... 24
3.6.3 URL Filter ................................................................................................................ 25
3.6.4 ACL.......................................................................................................................... 26
3.6.5 DOS Setting............................................................................................................. 28
3.8 Maintenance ............................................................................................................... 29
3.8.1 Update.................................................................................................................... 29
3.8.2 Password................................................................................................................. 30
3.8.3 Reboot/Restore ...................................................................................................... 30
3.8.4 Time........................................................................................................................ 31
3.8.5 Log .......................................................................................................................... 32
3.8.6 Diagnostics.............................................................................................................. 32

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 1
Chapter 1 Product Introduction
1.1 Product Description
The AirLive 2.5GE XPON ONU (1*2.5GE+1GE) is specially designed to meet the needs of
telecom operators for FTTO (office), FTTD (desktop), FTTH (home), SOHO broadband
access, video surveillance, etc. It is based on mature XPON technology, high reliability, easy
maintenance, and can provide QoS guarantee for different services. The ONU's 2.5GE
network port can fully meet the high access bandwidth requirements of WIFI 6 technology,
AR/VR technology, 8K video and other technologies, and can bring fast Internet access
experience and lower Internet latency for home users and enterprise users. The AirLive XPON
ONU-1GE has the function only without the additional 2.5GE port. The XPON ONU-1GE
comes with a single Gigabit RJ-45 port.
Figure 1-1: AirLive 2.5GE XPON ONU (left) & XPON ONU-1GE (right)
1.2 Special features
⚫Integrated auto detecting, auto configuration, and auto firmware upgrade technology.
⚫Support OAM/OMCI remote configuration and maintenance.
⚫Support rich VLAN, DHCP Server and IGMP snooping multicast feature.
⚫Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
⚫Support NAT, Firewall function.
⚫Support bridge and router mode.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 2
1.3 Technical Parameter
Technical items
Descriptions
PON interface
1 G/EPON port (EPON PX20+ and GPON Class B+)
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
Wavelength
Tx1310nm, Rx 1490nm
Optical interface
SC/PC connector
Interface (2.5GE
XPON ONU)
1* 10/100/1000Mbps and 1* 10/100/1000/2500Mbps auto adaptive
Ethernet interfaces. Full /Half Duplex, RJ45 connectors.
Indicator (2.5GE
XPON ONU)
5 indicators, SYS, PON, LOS, LAN1~2
Interface (XPON
ONU-1GE)
1* 10/100/1000Mbps auto adaptive Ethernet interfaces. Full /Half
Duplex, RJ45 connectors.
Indicator (XPON
ONU-1GE)
3 indicators, SYS, LINK/ACT, REG.
Operating condition
-5℃～55℃, 10%～90%（non-condensing）
Storing condition
-30℃～60℃, 10%～90%（non-condensing）
Power supply
DC 12V, 0.5A
Power consumption
≤4W
Dimension (2.5GE
XPON ONU)
100mm*92mm*29.5mm(L*W*H)
Net weight (2.5GE
XPON ONU)
0.11Kg
Dimension (XPON
ONU-1GE)
82mm×82mm×25mm（L×W×H）
Net weight (XPON
ONU-1GE)
0.08Kg

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 3
1.4 Application chart
Figure 1-2: Application chart (left 2.5GE model, right 1GE model)
1.5 Panel description
Interface/Button panel 2.5GE XPON ONU
1 2 3 4 5
Figure 1-3: Interface/Button panel
Name
Function
1: PON
Connect to OLT by SC type fiber connector, single mode optical fiber cable.
2/3: LAN1/2
The blue LAN2 is a 2.5GbE port and the yellow LAN1 is a 1GE port.
Connect to PC or other devices with Ethernet port by Cat5/Cat5E cable,
RJ-45 connector.
4: RST
Press RST button over 10 seconds, ONU restores factory default and
reboots.
5: DC 12V
Connect with power adapter. DC 12V, 0.5A.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 4
Indication Panel 2.5GE XPON ONU
Figure 1-4: Indication panel
LED
Mark
Status
Description
System
SYS
On / Off
System is not running or fatal error.
Blink
Normal running.
Registration
PON
On
The device is registered to the PON system.
Off
The device is not registered to the PON system.
Blink
The device is registering.
Optical signal
loss
LOS
Blink
Device does not receive optical signal.
Off
Device receives optical signal.
LAN
LAN1
LAN2
On
Port is connected properly.
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data.
Interface/Button panel XPON ONU-1GE
1 2 3 4
Figure 1-3: Interface/Button panel
Name
Function
1: PON
Connect to OLT by SC type fiber connector, single mode optical fiber cable.
2: LAN
Connect PC or other devices with Ethernet port by Cat5 cable, RJ-45 connector.
3: DC 12V
Connect with power adapter. DC 12V, 0.5A.
4: RST
Press RST button over 10 seconds, ONU restores factory default and reboot.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 5
Indication Panel XPON ONU-1GE
Figure 1-4: Indication panel
LED
Mark
Status
Description
Interface
LINK/ACT
ON
Port is connected properly (LINK).
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data (ACT).
Registration
REG
ON
Green：The device is registered to PON system.
OFF
Device has received optical signal and not registered to the
PON system.
Blink
Red：The Device does not receive optical signals.
Green：the device registration is incorrect.
System
SYS
On / Off
System is not running or fatal error
Blink
Normal running

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 6
Chapter 2 Quick Installation
2.1 Standard Packing Contents
When you receive your product, please check carefully to make sure that the product does
not have any defects. If something is wrong with shipping, please contact carrier; other
damage or lack of some parts, please contact with dealer.
Contents
Quantity
Dual Mode ONU
1 pcs
Power Adapter
1 pcs
Installation Guide
1 pcs
2.2 Quick Installation
1. Connecting the optical fiber cable to the unit.
a) Remove the protective cap of the optical fiber.
b) Clean the end of the optical fiber with an optical fiber end cleaner.
c) Remove the protective cap of the ONU optical interface (PON interface). Connect the
fiber to the PON port on the unit.
Note: When measuring the optical power before connecting to the ONU, it is
recommended to use a PON Inline Power Meter.
While connecting, please note:
⚫Keep the optical connector and the optical fiber clean.
⚫Make sure there are no tight bends in the fiber and that the bending diameter is greater
than 6cm. Otherwise, the optical signal loss may be increased, to the extent that signal
may be unavailable.
⚫Cover all optic ports and connectors with a protective cap to guard against dust and
moisture when the fiber is not used.
2. Apply power to the unit. Push the power button.
3. After the ONU is power ON, Indicators should light up as for normal operation. Check
whether the PON interface status LED (PON) is on continuously. If it is, the connection is
normal; otherwise, there is either a problem of the physical connection or the optical level
at either end. This may be caused by either too much or too little attenuation over the

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 7
optical fiber. Please refer to the Layout Description section of this installation manual for
normal LED activity.
4. Check all signal levels and services on all the ONU communication ports.
Unit Installation Adjustment
Installing the ONU on a horizontal surface (Bench top)
Put the ONU on a clean, flat, sturdy bench top. You must keep the clearance for all sides
of the unit to more than 10cm for heat dissipation.
Installing the ONU on a vertical surface (Hanging on a wall)
You can install the ONU on a vertical surface by using the mounting holes on the bottom
of the ONU chassis and two flat-head wood screws.
a) Insert the screws into the wall. The screw positions must be in the same horizontal line
and the distance between them must be 145mm. Reserved at least 6mm between the
screw caps and the wall.
b) Hang the ONU on the screws through the mounting holes.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 8
Chapter 3 Configuration
**Note** For this guide images of the 2.5GE XPON ONU WEBui were used.
After finishing the basic connection configuration, you can use its basic function. In order
to satisfy individuation service requirements, this charter provides the user parameter
modification and individuation configuration description.
This model of ONU is designed as SFU (single family unit, bridge mode). When it works
on bridge mode, VLAN of LAN port can be configured by OLT. You can also use this model
as HGU, you can configure router mode or bridge mode through its web management.
3.1 Login
The device is configured by the web interface. The following steps will enable you to login:
1. Conform “Quick Installation” to install.
2. The device default IP is 192.168.1.1.
3. Open your web browser, type the device IP in the address bar.
4. Entry of the username and password will be prompted. Enter the default login username
and password.
By default, Administration level username is "admin", password is "stdONUi0i".
By default, User level username is “user”, password is “user”.
Figure 3-1: Login

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 9
For security, you will be asked to modify password after you logged in by default password.
The new password must meet the requirements that are displayed on the web page. After
submitting, it requires you to login by new password.
Figure 3-2: Change Password
3.2 Status
This part shows the main information of the product.
3.2.1 Device Information
3.2.1.1 Device Info
This page shows the device basic information, such as Software Version, PON SN, LAN
info, WAN info and so on.
Figure 3-3: Device Information

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 10
3.2.1.2 PON Status
This page shows the current system status of PON.
Figure 3-4: PON Status
3.2.2 Statistics
This page shows the packet statistics for transmission and reception regarding the network
interface.
Figure 3-4: WAN Connection

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 11
3.2.3 Logout
This page is used to logout from the Device.
Figure 3-6: Logout
3.3 Setup
3.3.1 WAN
3.3.1.1 WAN Configuration
This page is used to configure the parameters for the WAN interface of the ONU.
Note: When connect type of PPPoE only is "Manual", the "Connect" and "Disconnect"
button will be enabled.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 12
Figure 3-7: WAN Connection
3.3.1.2 PON Settings
This page is used to configure the parameters for your EPON network access.
Figure 3-8: PON Settings

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 13
3.3.2 LAN
3.3.2.1 LAN Interface Setup
This page is used to configure the LAN interface of your Router. Here you may change
the setting for IP address, subnet mask, etc...
Figure 3-9: LAN Interface Setup
3.3.2.2 DHCP Mode
This page can be used to config the DHCP mode: None, DHCP Relay or DHCP Server.
(1) Enable the DHCP Server if you are using this device as a DHCP server. This page lists
the IP address pools available to host on your LAN. The device distributes numbers in the
pool to host on your network as they request Internet access.
(2) Enable the DHCP Relay if you are using the other DHCP server to assign IP address to
your host on the LAN. You can set the DHCP server IP address.
(3) If you choose "None", then the modem will do nothing when the host requests an IP
address.

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 14
Figure 3-10: DHCP Mode
3.3.2.3 DHCP Static
This page lists the fixed IP/MAC address on your LAN. The device distributes the number
configured to hosts on your network as they request Internet access.
Figure 3-11: DHCP Static IP Configuration

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 15
3.3.2.4 LAN IPv6 Setting
This page is used to configurate ipv6 Lan setting. User can set Lan RA server work mode
and Lan DHCPv6 server work mode.
Figure 3-12: DHCP IPv6 Setting

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 16
3.4 Advanced
3.4.1 Route
3.4.1.1 Static Route
This page is used to configure the routing information. Here you can add/delete IP routes.
Figure 3-13: Routing Configuration
3.4.1.2 IPv6 Static Route
This page is used to configure the ipv6 routing information. Here you can add/delete IPv6
routes.
Figure 3-14: IPv6 Routing Configuration

AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 17
3.4.2 NAT
3.4.2.1 DMZ
A Demilitarized Zone is used to provide Internet services without sacrificing unauthorized
access to its local private network. Typically, the DMZ host contains devices accessible to
Internet traffic, such as Web (HTTP) servers, FTP servers, SMTP (e-mail) servers and DNS
servers.
Figure 3-15: DMZ