Aiwa Katan Z User manual

Portable Wireless Stereo Speaker
AIWA Katan Z

Package Includes
•1 xSpeaker
•1 x Type-C chargingCable
•1 x AUX Cable(Ф3.5mm)
•1 x UserManual
Over vivew of Speaker
LED Indicator
TF Card
Charging port
AUX input
USB Disk

Charging
1. Before first time use, fully charge the built-in battery.
2.Connect the Type-C Cable (included)between
•the DC IN port on the speaker, and
•a USB port on a computer or USB AC Adapter.
LED Indicator
Battery Status
Flash Red
Low battery(<10%)
Solid Red Under Charging
Red light off
Full charged
Note: When the battery charge <3%，the speaker will
power off automatically.
Power On
Press button until hear a rising tone and LED
indicator lighton.
Power Off
Press button until hear a descending tone andLED
indicator light off.
BIuetooth connection
Make sure that the speaker is within 10 meters from
your mobile device,
1.Press button until hear a rising tone and LED
indicator fast blinking White.
2. Go to the Bluetooth settings on your mobile
device, search and select “AIWA Katan Z” from the
list. 3.Once paired, the LED indicator turns
Whiteblue.

Note:
•When power on, the speaker automatically
reconnects to the last mobile device it was connected
to. (The speaker can memorize maximum of 8 paired
devices).
•The speaker will automatically shut down after 10
minutes in pairing mode if no devices are paired for
power saving.
Music Control
Play/Pause
ClickV
olume UP
ClickV
olume Down Click
Next track Press and Hold
Previous track Press and Hold
Switch Bluetooth mode/Aux-in mode…………Click
Speakerphone(in Bluetooth Connection)
Answer an incoming call…………Click
Reject an incoming call…………Press and Hold
End the current call……………Click
Redial last-called number ……Press and Hold
Bluetooth Disconnection
Press “ ”,“ ” buttons simultaneously until LED
Indicator fast blinking White to disconnect the current
connected device, and go into new Bluetooth-paring
mode

5
TWS (True Wireless Stereo) Function
The TWS technology enables you to use two speakers
pairing via Bluetooth to create a wireless dual-channel
system to deliver true stereo sound effect.
TWS connection operation
1. Place the two speakers near each other (the distance
should not be over 10meters).
2. Power on the two speakers, double click the button
on one speaker as MASTER speaker (playback left
channel ), the LED indicator fast blinking White
then the two speaker will pair to each other
automatically (The other speaker will be as SLAVE
speaker and playback right channel)
3. Once paired, the MASTER speaker LED indicator
slow flash White.
Disconnect the TWS connection
Press“ ”, “ ” button on one of the speaker simultaneously
until LED Indicator fast blinking White to disconnect the
TWS connection.
Listening music from external audio source
1. Power on the speaker.
2. Using the AUX Cable (φ3.5mm),connect your
external device to AUX-in port on speaker.
3. It will automatically turn to AUX-in mode, the
LED Indicator turns solid green.
Note: Under AUX-IN mode, skip songs and speakerphone
function are not workable.

6
TF card reader (micro SD card)
Just simple insert your TF card into the port, the speaker
can automatically turn to TF card reader mode, and play
the MP3 music store in the card.
Music format: MP3, WAV,APE, FLAC, WMA
USB disk reader
insert your USB disk card into the port, the speaker can
automatically turn to TF card reader mode, and play the
MP3 music store in the card. Support
Music format: MP3, WAV,APE, FLAC, WMA
IPX5 Water-Resistant Feature
This Speaker is IPX5 Water-Resistant for rainfall, spills, or
water jets, but do NOT submerge it in water or liquids.
IMPORTANT Note -To ensure the speaker is prepared
to use for water-resistant,remove all the cable connec-
tions and close the port protection cover tightly.
Reset the speaker: If the function buttons without
working disconnect the charging cable, place a small
pin(Φ<3mm) into the reset key and hold it for 2 seconds
until the LED light off.

7
• Bluetooth Version:5.0
•Support: A2DPV1.2;AVRCPV1.4，
GAVDPV1.2;
AVDTPV1.2;SPPV1.2;AVCTPV1.2
•Wireless work distance:10meters
•Rated Power:2x20W
•Driver Unit: 2 xφ133mm(4Ω,2x20W)
•Frequency response:90Hz－20KHz
•Signal-to-noise ratio:>75dB
•Battery type: Lithium-ion (5000mAh)
•DC input voltage/current: TYPE-C DC5V/2000MA
•Playtime: 6-8 hours (varies by volume level andcontent)
•Battery charge time: 3-4hours
•Dimensions:336*136*106mm
•Weight:2032g
Caution
•Keep the speaker and its accessories away from the reach
of kids as they might cause a chokinghazard.
•Keep the speaker away fromfire,water,liquids,extreme
heat,and strong magneticfields.
•Do NOT use this speaker at high volume for extended
periods,as this may cause permanent hearing damage orloss.
•Do NOT drop or knock the speaker on hardsurfaces.
•Do NOT use chemicals or detergents to clean thespeaker
•Do NOT scrape the surface with sharpobjects.
•Do NOT make unauthorized alterations to thisproduct.

8
Troubleshooting
Cannot Power On
Charge the speaker and make sure it has enough battery
Cannot connect with the device
•Please check the following:
•The Bluetooth device supports A2DPprofile
•The Speaker is within 10m from thedevice.
•The Speaker is in pairing mode, the LED indicator
blinking blue andred.
No Sound
•Make sure the music volume is at audible level on both
your device andspeaker.
•Make sure your device is successfully paired withthe
speaker, the LED indicator turn solid blue.
Poor sound quality
Move the device closer to this Speaker or remove any
obstacle between them.