AJAX Systems SpaceControl User manual

SpaceControl User Manual
Updated December 11, 2019
SpaceControl is a miniature key fob controlling the security system at a
distance up to 1300 meters absent any obstacles. It allows to set the Ajax
security system in the armed, night or disarmed mode, as well as switch on an
alarm.
As it is the two-way communication, you will know whether the system has
received the SpaceControl command.
Operating as part of the Ajax security system, the key fob is connected to the
via the protected protocol. In addition, the key fob can be used to
control any third party security central unit through the or
integration module.
The fob is set up through the iOS and Android-based
or web application.
The Ajax system is self-sustaining, but the user can connect it to the monitoring
station of a security company.
hub Jeweller
uartBridge ocBridge
Plus
mobile application for
smartphones

Functional elements
Buttons can be assigned when using a key fob with hub and Ajax uartBridge. At the
moment, the feature of modication of commands (and deactivation) of the key fob
buttons when using with the Ajax hub is not available.
Using the key fob
Maximum connection distance between the key fob and the hub – 1,300 meters.
This distance is reduced by walls, inserted oors and any objects hindering the
signal transmission.
Buy key fobSpaceControl
1. System arming button
2. System disarming button
3. Night mode button
4. Panic button (activates the alarm)
5. Light indicators
6. The hole for attaching the key fob

SpaceControl operates only with one security system (Ajaх or third-party system
via the integration module). If you connect the key fob to a new security system,
it will cease to interact with the previous system. However, the key fob will not
be automatically deleted from the list of devices of the hub.
The key fob can:
To disconnect the actuated security system (siren), press the disarming mode
(C) on the key fob.
Operational Indication
Depending on the rmware version, the SpaceControl key fob LEDs indicate the
status with red or green light.
The key fob reports its status only after any button is pressed.
Indication Event
4 green key fob LEDs blink 6 times The key fob is not registered with any security
system
Two green LEDs next to the pressed button light
up once
The key fob command has been sent over to
the security system
The LEDs next to the pressed button quickly
blink green 4 times when a key fob
withrmware version 3.16 and loweris used
The central LED lights up red briey when a key
fob withrmware version 3.18 and lateris used
The command has not been delivered as the
security system is too far away and cannot
receive the command
Two LEDs next to the button light up green
twice. Then 4 key fob LEDs blink green 6 times
The key fob has been removed from the
security system devices
The central LED lights up green for a few
seconds Linking a key fob to the security system
Arm the system — press the button (O) once
Arm the system in the night mode — press the button (c) once
Disarm the system — press the button (C) once
Switch on an alarm — press the button (!) once

The central LED lights up green for
approximately half a second when a key fob
with firmware version 3.18 and later is used
The system has executed the key fob command
The central LED lights up red for approximately
half a second when a key fob with rmware
version 3.18 and later is used
The system has not executed the key fob
command — integrity verication is enabled in
the system and one of the devices is faulty
After the main indication, the central LED lights
up green once and gradually goes out when a
key fob withrmware version 3.16 and loweris
used
After the main indication, the central LED lights
up red once and goes out gradually when a key
fob withrmware version 3.18 and lateris used
The key fob battery needs replacement. In this
case, the key fob commands are delivered to
the security system.
Continuous short ashes of green light when a
key fob withrmware version 3.16 and loweris
used
Continuous short ashes of red when a key fob
withrmware version from 3.18 to 3.52is used
Key fobs withfirmware version 3.53 and
laterdo not function when the battery charge
level is unacceptably low, do not communicate
commands to the hub, and do not notify with
LED indication
The battery charge level is unacceptably low.
The battery needs replacement.
In this operation mode, the key fob commands
are not delivered to the security system.
Connecting the key fob to the Ajax Security System
Connection to hub
Before starting connection:
What is system integrity
check?
Battery replacement
Battery replacement
1. Following the hub instruction recommendations, install the
on your smartphone. Create an account, add the hub to the application, and
create at least one room.
Ajax application

Only users with administrative privileges can add the device to the hub.
How to connect key fob to hub:
Request for connection to the hub is transmitted for a short time at the time of
switching on the device.
The key fob connected to the hub will appear in the list of devices of the hub in
the application.
Connecting the key fob to Third Party Security Systems
To connect the key fob to a third party security central unit using the
or integration module, follow the
recommendations in the manual of the respective device.
States
2. Go to the Ajax application.
3. Switch on the hub and check the internet connection (via Ethernet cable
and/or GSM network).
4. Ensure that the hub is disarmed and does not start updates by checking its
status in the mobile application.
1. Select theAdd Deviceoption in the Ajax application.
2. Name the device, scan/write manually the QR Code (located inside the body,
on the battery xture and packaging), and select the location room.
3. SelectAdd— the countdown will begin.
4. Simultaneously press the button for armed mode (o) and thepanic
button(!) – the key fob will blink with the central LED. For the detection and
interfacing to occur, the key fob should be located within the coverage area
of the wireless network of the hub (at a single protected object).
Ajax
uartBridge Ajax ocBridge Plus

Parameter Value
Battery Charge Battery level of the key fob
Panic Button Panic button status
Firmware Firmware version of the key fob
Device ID Device identier
Setting Up the key fob
1. Devices
2. SpaceControl
1. Devices
2. SpaceControl
3. Settings

Setting Value
First eld Device name, can be edited
Room Selecting the virtual room to which the device is
assigned
Arming/disarming permission
Selection of a security group that the key fob
manages. You can select All groups or a single
group.
👆 Conguration is available only after group
mode activation
Key fob user
Selection key fob user.
Key fob is unassigned:
Key fob is assigned to user:
Panic Button Turning on/off the panic button
Key fob events are sent to Ajax apps under the
key fob name.
Security mode management rights are
determined by key fob settings.
Key fob events are sent to Ajax apps under the
user’s name.
The key fob has the same security mode
management rights as the user.

Alert with a siren if panic button is pressed If active, and are
activated after panic button pressing
User Manual Opens the device User Manual
Unpair Device Disconnects the device from the hub and
deletes its settings
Key fob Maintenance and Battery Replacement
When cleaning the key fob body use any means suitable for equipment
maintenance.
Do not use for cleaning SpaceControl any substances containing alcohol,
acetone, gasoline and other active solvents.
The pre-installed battery provides up to 5 years of operation of the key fob
during normal use (one arming and disarming of the security system per day).
More frequent use can reduce battery life. You can check battery level at any
time in the Ajax app.
The pre-installed battery is sensitive to low temperatures and if the key fob is
signicantly cooled, the battery level indicator in the app may show incorrect
values until the key fob gets warm.
The value of the battery level is not updated regularly, but only after pressing one of the
buttons at the key fob.
When the battery is discharged, the user will receive a notication in the Ajax
app, and the key fob LED will slowly light up and go out red each time the button
is pressed (key fobs with rmware version 3.16 and lower light up green).
Tech Specs
Number of buttons 4
HomeSiren StreetSiren
Battery replacement

Panic button Yes
Frequency band 868.0 – 868.6 MHz or 868.7 – 869.2 MHz
depending on the region of sale
Compatibility Operates with , , , ,
,
Effective radiated power 6.01 dBm / 3.99 mW (limit 20 mW)
Modulation of the radiosignal GFSK
Radio signal range Up to 1,300 m(any obstacles absent)
Power supply 1 battery CR2032A, 3 V
Service life from the battery Up to 5 years (depending on the usage
frequency)
Operating temperature range From -25°С to +50°С
Operating humidity Up to 95%
Overall dimensions 65 х 37 х 10 mm
Weight 13 g
Certication
Security Grade 2, Environmental Class III in
conformity with the requirements of EN 50131-
1, EN 50131-3, EN 50131-5-3
Complete Set
Warranty
Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY
COMPANY products is valid for 2 years after the purchase and does not apply to
the pre-installed battery.
If the device does not work correctly, you should rst contact the support
service —i n half of the cases, technical issues can be solved remotely!
Hub Hub Plus Hub 2 ReX
ocBridge Plus uartBridge
1. SpaceControl
2. Battery CR2032 (pre-installed)
3. Quick Start Guide